Rotary tool chainsaw sharpener

Rotary tool chainsaw sharpener DEFAULT

How To Sharpen Your Chainsaw Using a Rotary Tool

A cordless chainsaw can be one of the most useful outdoor power tools you can own. They make short work of tasks like removing tree branches and chopping wood. 

As useful as a chainsaw is, you will need to maintain the machine. One of the most important tasks as far as maintenance goes is sharpening the chain. Cutting with a dull chain can be a safety hazard, so you need to make sure to keep your chainsaw sharp.

Some people might choose to replace the chain on a chainsaw when it gets dull, but sharpening is a better idea. You can also save time and make the task easier if you sharpen your chainsaw with a rotary tool. For the best rotary tool, check out the MAKERX rotary tool. The design of the Worx MAKERX rotary tool makes it more precise and versatile than competing models.

In this post, we are going to look at how to sharpen a chainsaw. You will learn how to use a rotary tool for this task to sharpen the chain.

Benefits of Chain Sharpening 


Safety is the first and most important reason to sharpen your chainsaw chain. A sharper chain cuts better and it is less likely to kick when you cut.

Knowing how to sharpen a chainsaw chain can also save money. Replacement chains cost money. By sharpening the chain on your chainsaw, you can get more use from one chain before it needs to be replaced. 

Finally, it will make the work easier. A sharp chainsaw chain will cut with little to no pressure. If the chain is dull, you will need to push it through to cut. This not only puts more work on the mechanical parts of the chainsaw, it makes you work harder.

How to Sharpen a Chainsaw


Some people might choose to sharpen a chainsaw with a file. That said, sharpening a chainsaw is one of the best rotary tool uses. It will get the work done faster and it will be easier to restore the blade.

To do the work, you will need a rotary tool and a thin-diameter grinding stone attachment. If you want to make the work easier, you could get a chainsaw sharpener kit for your rotary tool. The kit will come with the bit and an attachment that holds the tool steady and at an angle.

To start, be sure to wear gloves and eye protection when sharpening a chainsaw. If you are working on a battery-powered chainsaw, remove the battery before you start working on the blade. 

  1. Use a marker to mark the section of chain you are going to sharpen first.
  2. Turn on the rotary tool and sharpen the first tooth holding the bit at a 30° angle. 
  3. It only takes a few seconds to sharpen each blade so try to sharpen each section for the same amount of time.
  4. Remember, the teeth alternate in direction so make sure to match the bit to the direction of the tooth. 
  5. Work your way around the chain sharpening each tooth until you get back around to the first one with the mark.

Yard tool maintenance is an important part of keeping your tools working well. Sharpening a chainsaw is not hard and it will go a long way toward maintaining the machine and ensuring that you can get clean, smooth cuts every time you use it.


Article Name

How To Sharpen Your Chainsaw Using a Rotary Tool


As useful as a chainsaw is, you will need to maintain the machine. One of the most important tasks as far as maintenance goes is sharpening the chain. Cutting with a dull chain can be a safety hazard, so you need to make sure to keep your chainsaw sharp.


Rae Steinbach

Publisher Name


Publisher Logo


With the advent of modern technology, people find old manual tools redundant, such as axes, which they used for wood cutting in ancient times. It’s economical to use high-powered chainsaws that will spare you the staining and dirt that you get from using traditional tools.

High-powered chainsaws that will spare you the staining and dirt that you get from using traditional tools. In this article, I will give you more in-depth information on how to sharpen a chainsaw with a Dremel. First, let know about the chainsaw and Dremel.


How To Sharpen A Chainsaw With A Dremel

What is Chainsaw?

BLACK+DECKER 40V Max Cordless Chainsaw, 12-Inch (LCS1240)

A chainsaw is a wood cutting tool which has a sharp serrated chain that moves round to cut the wood. It uses a fuel-driven motor that rotates the chain to cut through any wood. You will require only a little energy to hold the chainsaw in position, but the motor facilitates the rest.

Chainsaws are of different sizes and power. Some motors are powerful than others. Certain chainsaws are longer than others shorter in length. The best depends on how you intend to use your chainsaw.

A chainsaw is a mechanical power-driven cutting tool with teeth set on a chain which moves around the edge of a blade (Oxford Dictionary).

What is Dremel?

Dremel MM50-01 Multi-Max Oscillating DIY Tool Kit with Tool-LESS Accessory Change- 5 Amp- Multi Tool with 30 Accessories- Compact Head & Angled Body- Drywall, Nails, Remove Grout & Sanding

A Dremel is a tool with a universal head to be fitted with different sizes of bit attachments used for sharpening chainsaws. The tools are manufactured by an American based company known as “Dremel” and which manufactures the best sharpening tools.

All their Dremels and their rotary bits are of high-quality and are highly effective in sharpening different chainsaws. For the professional sharpening of a chainsaw, it is good to but a Dremel tool that simplifies the sharpening work.

Dremel is an American brand of power tools known primarily for its rotary tools. Dremel’s rotary tools are similar to the pneumatic die grinders used in the metalworking industry by tool or moldmakers. (Wikipedia)

Dremel sells rotary bits of different sizes in a single pack, and you can choose a size according to your requirement. These tools have been proven for high performance and high quality by professionals who use diamond chainsaws.

All products from Dremel can help you achieve professional results at home, and they are compact, powerful, versatile, and lightweight.

Nothing can sharpen your chainsaw as good as a Dremel. Let’s read about how to sharpen a chainsaw with a Dremel and some useful tips and tricks!

How to Sharpen a Chainsaw with a Dremel – Step by Step Guide

Assembling the Tools

Assembling the Tools

Before you start sharpening your chainsaw, you must assemble all the tools you will require to sharpen the chainsaw.

It would be best if you have a tarp, a Dremel with a diamond sharpening attachment, safety goggles, and lubricant oil as well as working gloves. Each tool is essential for the effectiveness of sharpening your chainsaw.

You should also select an open space where you will sharpen your chainsaw. The place needs to be comfortable so that you don’t strain yourself while sharpening your chainsaw.

You can sharpen your chainsaw anywhere, but choosing an open space like a garage can help you with managing waste disposal.

The garage has enough room for keeping your tools, and there are least chances of getting disturbed during your task. In most garages, there are unique rooms meant for sharpening purposes.

Safety When Sharpening a Chainsaw

Whenever you want to handle tools in a garage or even outside, you have to be in proper protective gears. Safety comes first when handing sharpening tools, and you must wear proper gloves to hand sharp objects along with safety goggles to protect your eyes from iron specs.

It’s good to prevent such injuries than end up treating them. Observing safety is the first secret to sharpening a chainsaw.

Start by Removing the Blade

This is the third step towards sharpening your chainsaw using a Dremel chainsaw sharpener. It is advisable to remove the blades following the manufacturer’s manual to avoid damaging them. There are some chainsaws you can sharpen with the modules in the frames.

Blades are easy to sharpen when they are removed, and it also makes it easy to work on individual blades on the chain.

Remember, you must be careful because the blades that you want to sharpen can still cut your soft flesh.

Using a Dremel Effectively

One thing about a Dremel is that it’s usable for various purposes. This tool has a strong handheld base and a universal head where you can attach several tools. The head rotates whenever you switch on the Dremel. It is this head rotation that will sharpen the blades.

Below are the chainsaw sharpening techniques used in using a Dremel:

  • Ensure you a squared slab with a cylindrical container attachment at the center. The diameter of this container should be the same to the one on the hole on the chainsaw’s blade. The square slab should have a wooden slab on the lower side to be secure.
  • The chisel should be attached on another slab to ensure the cylinder and the Dremel are held in a good position for effective sharpening.
  • The blade should be put in the bottle and allowed to rest on the slab.
  • Turn on the Dremel diamond chainsaw sharpener and run it free for a while.
  • The blade should be passed through the tool while rotating it on the next tooth.

Repeat this process to sharpen all the other blades.

The Dremel should always be on your right-hand side. You should remove and flip the Dremel to keep it in the right position. For effective results, exert little pressure on the edge of all the chain teeth against the blade of your Dremel for some seconds.

Chainsaw Sharpening Mistakes

Some people make mistakes while sharpening their chainsaws. To ensure that you don’t get into a mess, you must understand how to use a chainsaw sharpener correctly. Below are some mistakes chainsaw sharpeners make:

  • Using the wrong-size file for round-tooth chainsaws.
  • Filing the cutters instead of the depth gauge.
  • Over-filing the depth gauge, which makes your chainsaw to overwork and becomes prone to kickback.
  • Using a dull file to sharpen your chainsaw.
  • Not bracing the saw properly.
  • Filing backwards.

Other than these mistakes, you should always place your chainsaw at appropriate chainsaw sharpening angles. Failure in doing this may result in loss and damage of either the blades or the entire chain.

Is It Worth Sharpening a Chainsaw?

If you value the machine you purchased for working on wood, you should keep it sharp. Working with a chainsaw that is not sharpened is tiresome and dangerous.

An unsharpened chainsaw will end up consuming a lot of fuel and doing very little work. Your machine can break down due to possible kickback the chainsaw may experience.

To summarize:

  • A dull blade puts pressure on the engine.
  • A dull blade may lead to some accidents because it causes resistance as you cut.
  • A dull blade cuts poorly.
  • A chainsaw with dull blades is not economical on fuel consumption.

Chainsaw Sharpening Kit

A basic kit contains eight chainsaw sharpening tools that are Unidrift. All the tools required to sharpen your chainsaw are included in this kit. It also comes with a guide to help you do the job in the right manner.

This guide shows you how to use different sharpening angles. The kit also includes files to handle various chain gauges. Also included in this kit is a depth gauge tool for fine-tuning the depth gauges.

The Best Way to Sharpen a Chainsaw

You can decide to sharpen your chainsaw manually using a file or using an electric chainsaw sharpener. It will all depend on your preferences.

However, some people may end up arguing that sharpening it using hands is fine, but this way, it’s tiring and time-consuming.

Electric sharpeners save time, are effective, and hence the best option for aggressive cost-effective chainsaw sharpening.

Your Chainsaw Must-Have Lubricating Oil

Paramount for the effectiveness of any machine as it helps prevent wear and tear of its parts. Running a chainsaw without a lubricant will damage it.

The chain quickly wears out due to friction with the chainsaw bar. You should check the oil level whenever you want to use the chainsaw.


With all the information listed here, you are now in a better position to sharpen and use your chainsaw effectively. This will make your experience fruitful and will help prevent any accidents that may arise as a result of dull blades.

You’re now aware of how to keep safe during sharpening a chainsaw with Dremel, how to avoid mistakes and the importance of lubricating your machine. Thank me later!

You may also read:

1. How to Sharpen Circular Saw Blades – 7 Steps Handy Guide (2020)
2. How to Sharpen a Pole Saw Blade – 3 Effective Ways (2020)
3. How To Measure a Chainsaw Bar – Useful Tips and Guides (2020)

Share on:

  1. Wings over ithaca hours
  2. Grommet panel pair
  3. Disney rewards codes 2016
  4. Affordable housing lacey wa
  5. Wall collage ideas vsco

Dremel Chainsaw Sharpener

This post may contain affiliate links so I earn a commission. 

The Dremel chainsaw sharpener might be just the tool for the job if you're looking for a fast and easy way to sharpen your chainsaw.

Ideal for professionals and homeowners alike, this product is great for the DIYer who wants to be able to both sharpen and grind an assortment of tools, and not just chainsaws.

It’s a multipurpose option that can save you time, money - and storage space.

Here’s what you need to know.

What Is A Dremel?

Dremel is an American company that specializes in making power tools for home improvement and hobby purposes. 

Its rotary tools are perhaps the most famous but it also offers other tools like versatips, powered screwdriver, scroll saws, and most importantly, attachments to help you sharpen a chainsaw.

The Dremel A679-02 is an attachment kit that is ideal for outdoor gardening and landscape maintenance.

Buy this package deal, and you’ll get everything you need to sharpen a lawn mower, chainsaw, shears, shovels, hoes, and more. 

The Dremel chainsaw sharpener is an excellent tool that is both versatile and affordable.

Though perhaps not as suitable for someone who needs to use a chainsaw on a daily basis, like a logger or arborist, it’s a great tool for someone who needs to do just occasional cleanup of brush and trees around the home. 

Dremel Chainsaw Sharpener Review

When it comes to finding the right chainsaw sharpener, you’ll have plenty of options to choose from - even just within the Dremel family of products. 

The Dremel chainsaw sharpener is meant to be used with Sharpening Kit #A679-02, a kit that will allow you to sharpen hoes, shovels, shears, lawn mower blades, and of course, your chainsaw. 

Dremel A679-02 Attachment Kit

There are multiple attachments with this kit, including separate ones for your lawn mower, chainsaw, and other tools.

The kit also comes with gauges, spacers, wrenches, and sharpening stones so you’ll have everything you need for an efficient job. 

Product Highlights

  • 10 rotary tool attachment kit 
  • Made out of sturdy aluminum oxide and precision ground abrasive stone
  • Backed by a one-year manufacturer's warranty
  • ⅛” shank and 3/16” cutter diameter


  • Rotary tool easily screws into place
  • Lets you sharpen dull chainsaw blades quickly and easily
  • Everything you need for effective and cost-efficient home landscape maintenance 
  • Budget friendly option for homeowners 


  • Takes a while to sharpen individual cutter teeth
  • Not ideal for someone who needs to sharpen a chainsaw frequently (such as a professional arborist or logger)

How Much Does A Dremel Chainsaw Sharpener Cost?

You have a few different options when buying a Dremel chainsaw sharpener. 

We recommend buying the chainsaw sharpener within the home and garden maintenance package - the Dremel A679-02 attachment kit for sharpening outdoor gardening tools

This package will provide you with other sharpening tools for tending to an assortment of landscaping equipment, like hoes and shovels, lawn mower blades, and shears.

This combination deal costs just under $20, making it a budget-friendly option for the efficiently-minded homeowner.

Of course, you can always just buy the chainsaw sharpener if that’s what you have in mind - this will run you around $7 or $8.

How Do You Sharpen A Chainsaw with A Dremel?

First, make sure your chainsaw chain is actually dull! 

All kidding aside, it’s a good idea to sharpen your chainsaw chain each and every time you top off the tank with gas

While your chain might not be super dull when it’s time to refill, getting into the habit of resharpening is a good way to make sure you’re working with the most efficient (and safest) tool possible.

Remember, a chainsaw that is dull is more likely to kick back on you and cause serious injury. 

Plus, it’s harder to use. 

You’ll know your chainsaw chain is ready to be sharpened if it’s producing dust rather than wood chips while it’s cutting.

If it’s hard to physically push the saw against the wood to cut, that’s another telltale sign that a sharpening is necessary.

Using a Dremel to sharpen a chainsaw is one of the easiest ways to do so.

Buy a sharpening kit and you’ll receive a guide that will help keep the tool level and at the right angle while you are sharpening

You’ll want to make sure you are using the appropriate sharpening bit for your chainsaw - you can use the table included with your Dremel kit to figure out which bit is best.

Then, attach the sharpening guide and bit to your Dremel. 

Mark the tooth on the chain where you plan to start.

Put on a pair of gloves to protect your hands, then use the sharpening guide to keep your Dremel tool level and at the perfect angle.

Turn your Dremel on and slowly sharpen that tooth.

Once you’re finished the first tooth, you can move onto the next one.

It’s important to sharpen each tooth for the same amount of time (counting to ten can help!) so that the teeth are sharpened evenly - even teeth are best for producing consistent cuts

Remember, too, that every other tooth is positioned in the same direction with the others needing to be sharpened in the other direction. 

Pay close attention to the direction while you sharpen and keep going until you’ve sharpened every single tooth.

Can A Dremel Sharpen Tools Besides Chainsaws?


If you buy one of the Dremel attachment kits like we described above, you can sharpen everything from shears to hoes, shovels to lawn mower blades.

Of course, you can also buy just a special chainsaw sharpener tool that isn’t contained within a package deal.

These are meant solely for sharpening just chainsaws.

What Is The Best Chainsaw Sharpener?

Although the Dremel chainsaw sharpener may not be the best option for someone who has to cut a lot of wood every single day, it’s a great chainsaw sharpener for the casual saw user who just needs to sharpen every now and then.

One of the cheapest options you can find and also easy to use, the Dremel chainsaw sharpener is one of the best chainsaw sharpeners for the weekend warrior!


Sharpening Kit: Chain Saw, Lawn Mower & Gardening Tool

Dremel Sharpening Kit: Three attachments-- the Dremel Chain Saw Sharpener, Lawn Mower Sharpener, and Garden Tool Sharpener are included together in one kit for your convenience. - Lawn mower guide provides optimal sharpening angle for all lawn mower blades - Easily sharpen dull, slow-cutting chain saw blades - Guide helps restore edge on garden tools such as shears, hoes, and shovels - Easily screws on to your rotary tool in place of the tool's housing cap Includes - Garden tool sharpening attachment - Lawn mower sharpening attachment - Chain saw sharpening attachment - Gauge - Spacers - Instruction Manual - Wrench - 4 Sharpening stones: 453, 454, 455 and 932.

  • Dremel Sharpening Kit: Three attachments
  • Lawn mower guide provides optimal sharpenting angle for all lawn mower blades
  • Easily sharpen dull, slow-cutting chain saw blades
  • guide helps restore edge on garden tools such as shears, hoes & shovels
  • Easily screws on to your rotary tool in place of the tool's housing cap

Chainsaw rotary sharpener tool

Your memory is correct Jake. You haven't lost it yet, except for that splitting job....

I filed chains for many, many moons by hand until my hands kept hurting too much to continue so finally broke down and got the dremel-type sharpener. Sure, I had heard the stories about how they would not work worth a hoot especially compared to hand filing them. However, that has not proved to be the case at all. I think I can sharpen as good with the dremel as I can by hand and do it a whole lot faster too. I simply keep the sharpener in the tool case and it is with me whenever I go to cut wood. If the saw needs sharpening, I just hook up to the atv and do the sharpening. I used to be able to just clip onto the battery for power but our new atv I had to change the end so I could plug it in rather than clip onto the battery.

As for the sharpening, I do not work as slow as the video they put out. If held onto the tooth that long it would seem to me to burn and thereby losing the temper. I just do not hold it on the tooth that long and if need be, just sharpen it twice around. I tend to sharpen often so only once or twice have I double sharpened it.

I also do not do like most on this forum. That is, I have only the chain that is on the saw and I do not keep extras around. Can't see the sense in having that much money tied up in chains. When the chain gets worn badly, then I'll buy another but usually only have the one on the saw.

I've talked to a few others who also use this type sharpener and they all have told me they can do a better job of sharpening with it than they could by hand. You can pick these things up for $10 many times. They are worth it too.


How to Sharpen Chain Saw Blade - Using Dremel Sharpening Kit on Husqvarna Chainsaw

Product Specifications

Three Attachments-- The Chain Saw Sharpener, Lawn Mower Sharpener, And Garden Tool Sharpener Are Included Together In One Kit For Your Convenience.

  • Lawn mower guide provides optimal sharpening angle for all lawn mower blades
  • Easily sharpen dull, slow-cutting chain saw blades
  • Guide helps restore edge on garden tools such as shears, hoes, and shovels
  • Easily screws on to your rotary tool in place of the tool's housing cap
Contents: Garden tool sharpening attachment, Lawn mower sharpening attachment, Chain saw sharpening attachment, Gauge, Spacers, Instruction Manual, Wrench, 4 Sharpening stones: 453, 454, 455 and 932
Warranty: Product Defects Only - 1 Year
Grit: 80
Height: 1.8 "
Material: Aluminum Oxide
Width: 4.275 "
Fits Tool Model:: Dremel models: 4300, 4200, 4000, 400, 3000, 300, 398, 395, 200, 285, 100, 275, 8220, 8200, 8100, 800, 770, 7700
Tool Level: 10 - rotary tool attachment
Shank Diameter: 1


Popular Accessories


Similar news:

On the first cassette there was nothing special, two guys and the chick fucked, sucked and licked. Although there was nothing special there, Steve and Jim began to move in their swimming trunks and, without noticing it, they began. To furtively stroke the swimming trunks in the place where their manhood protruded.

2562 2563 2564 2565 2566