Linux perccli utility

Linux perccli utility DEFAULT

gpo.zugaina.org

sys-block/perccli

LINUX PERCCLI Utility For All Dell HBA/PERC Controllers

Screenshots

  • perccli-7.5.007.0529-r2

    -* ~amd64 ~x86

    doc efi


    View      Download      Browse     License: Avago BSD   

    Overlay: gentoo

  • perccli-7.5.007.0529

    -* ~amd64 ~x86

    efi


    View      Download      Browse     License: Avago BSD   

    Overlay: moexiami

  • perccli-7.5.007.0529

    -* ~amd64 ~x86

    doc efi


    View      Download      Browse     License: Avago BSD   

    Overlay: gentoo

ChangeLogUSE FlagsDependenciesReverse DepsRelated Bugs




Sours: https://gpo.zugaina.org/sys-block/perccli

Linux perccli utility

You can make lists and write random ideas. zashen: nv-card-pm Dec 18, 2020 · Updating the Firmware on the new Dell HBA345 Card (Same as for the LSI 9400-8i/16i) Using Perccli and Storcli in EFI, Linux and Windows only; SAS 4. Something like that "perccli-007. 3. 02. You can use advanced features through Dell OpenManage storage management application and Dell Jan 18, 2021 · Then, just type: perccli /c0 download file=pathtofirmwarefile (Where “pathtofirmwarefile” is the location to where you saved the new firmware) For example, if you saved the firmware file to your desktop: perccli /c0 download file=C:\Users\Techdude\Desktop\hba345. It would seem that dell modelled their proprietary "perccli" utility off of storcli, which is just a "newer" megacli. Information. rpm. Apr 23, 2019 · Could it be that perccli is just their name for the tool which has the same parameters like storcli? Could you try a simple symbolic link so that /usr/sbin/storcli is a symlink to the perccli tool? Copy link Jan 14, 2015 · Dell PERC command-line utility program perccli This tool apparently works for all PERC9 controllers and the following operating systems are supported: Novell SuSE Linux ES 11 MS Windows Server 2012 Red Hat Ent Linux 6 Red Hat Ent Linux 7 SUSE Linux ES 12 MS Windows Server 2012 R2/SP MS Windows 2008 R2 perccli /c0 show eventloginfo enter the command fdisk -l. *** Use Gnu-zip or other unzip utility to open the file and find the Linux directory. LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. 8 Red Hat Enterprise Linux 6. Working with the Linux Rescue System. If this happens during deployment, the deployment may fail during VD creation on the physical disks. For Dedicated Servers acquired before 28-10-2018 and Server Deals. We are processing your request. To install the percli RPM, run rpm -ivh , or to upgrade the percli RPM, run rpm -Uvh . Megarec is more like a recover and "rinse clean" sort of utility. 0, Upcoming 24Gbps, New HBA’s and RAID cards, SlimSAS, My New “Cables” and the new SFF Connector: The Future Is Here, Bois. Jul 19, 2018 · There is a utility from LSI called lsiutil; you can try storcli - there are some guides on how to use it; you can try perccli from Dell, however it comes as an rpm package and you will have to use the alien command (install it from apt install alien) and allow scripts; esx-perccli. Windows PERCCLI Utility For All PERC Controllers Dell. Aug 16, 2019 · The only time this character would a letter "o" is when using sas3flsh utility to give it the elevated privileges mode prior to flashing, ex: sas3flsh -o-f hba330. It is a fork of my previous project keep-cli. bin. fdisk is a command line utility for partitioning disks. This project is just a collection of personnal cheat sheets, about various linux related topics. pdf ), LSI MegaRAID MegaCLI ( Software guide 51530-00_RevO. 0000. Download the OpenManage software ISO image from the R640_downloads page in the Systems Management download category. Enter the Endura Linux commands needed under Script Commands. StorCLI (Command Line) Utility for Storage Management Adapters Supported: ServeRAID C100 for System x (90Y4322) ServeRAID C105 for IBM System x (RAID mode) (90Y4386) ServeRAID M1215 SAS/SATA Controller (46C9114) LSI SAS3004 RAID for NA-Newport RAID ServeRAID M5210 SAS/SATA Controller for (46C9110) ServeRAID M5225-2GB Challenge Modal HTML. even the old controller, which is on more than 8 years could be Jul 30, 2021 · Ubuntu is the modern, open source operating system on Linux for the enterprise server, desktop, cloud, and IoT. . MegaCLI is a tool used as a command-line interface to communicate with the LSI family of RAID controllers. 7. 11. The next tab, Physical Disk Management shows the new foreign disk in slot 0. Intro. apt-get install srvadmin-idracadm8. All of them should be treated with caution. In this article you will learn how to use the rescue system of your Dedicated Server. you can find the rpm file in it. is independent of the operating system. As an example, let’s list all the logical volumes • Red Hat Enterprise Linux version 5. 29 MB. Device dependency on Linux operating system Downloading and installing the RAID controller log export by using PERCCLI tool on ESXi is a utility that collects Windows PERCCLI Utility For All PERC Controllers. com/prometheus/node_exporter/tree/master/text_collector_examples named storecli. To enable Lifecycle Controller, reboot the server. Wait a little until the sampler successfully samples the 'perccli' utility, and then click "Retry". Launch an administrative command prompt (START > RUN or Search Bar > CMD - right-click the command prompt icon and select 'Run as administrator') 2. Aug 07, 2014 · Step 1: Seems like LSI was taken over by another company. Operating System. The 'megaraid_lsmplugin' executable file is for libStorageMgmt daemon to execute when client user specifies megaraid plugin in the URI. This is just a quick personnal cheatsheet: treat its contents with caution! Bootable media: how to get a live-usb¶. 03-1_all. Whitehadow Challenge Frame. 2 and later (64-bit) • SUSE Linux Enterprise Server version 10 SP4 (64-bit) • SUSE Linux Enterprise Server version 11 SP2 (64-bit) • VMware ESX 4. Before you create the database make sure that you either run Locking utility for smart cards: ges: noted-cli-git: 0. Ubuntu Server 18. 14 Oct 2020 LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. Second Gen LSI Cards: The Low Maintenence Girlfriend Dell OpenManage. noarch. Usually you have to check BIOS version (for example for Spectre and Meltdown bugs ), but also the other firmware. Seriously. File Name. As for the bios issue for servers or pc's that refuse to boot or enumerate the bios after 3 minutes, there is one solution you can do that can actually bypass the bios enumeration. 1212. Dell. This is Dell EMC OpenManage repository for Ubuntu Server LTS and selected Debian releases support. The utility will find the firmware and update your card. LINUX PERCCLI Utility For All Dell HBA/PERC Controllers https://www. 3_007. Copy to Clipboard. Feb 05, 2018 · rpm -ivh /tmp/perccli-1. perccli_d6ywp_7. Here, you simply enter the RAID level you want under type, e. SCI-41950 SR# 13244526 Jan 13, 2016 · Syntax is perccli /c0/e32/s4 show all; Downside of this method is that perccli binaries exist just for windows or linux so you cannot use it directly from ESXi and you have to boot for example Linux live CD. H310 and Fan Noise Tiến hành theo các bước sau để cài đặt PERCCLI lên Linux OS: Download Linux PERCCLI utility từ trang chủ Dell. sh to build the overlayfs This should create the dell. Using perccli with Dell PE R710 and Perc 6/i. Most of them are still Work In Progress. Once in the PERC Configuration Utility use Ctrl+ N to switch between the tabs, below you can see the Virtual Disk Management page and the missing disk. 7: Once ESXi boots, lets take a look at the ESXi host Web client. type=raid1 for RAID-1 or type=raid5 for RAID-5. 03-1. The Dell-provided CLI-raid-utility is for Ubuntu 16. *** Put the file in the root home directory and then use the command to install. 2 Accessing the command prompt 7 I just tried this and it seems to work fine now. This article describes how to enlarge a partition with fdisk. 0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 05) Visit the support section of LSI's site, the 9260 is part of the "MegaRAID Value Line". The Rescue System is an important tool for diagnosing and repairing issues with your server’s system. rpm" without quote. fw. LSI Command Line Interface cross reference MegaCLI vs tw_cli vs Storcli. However, resizing with parted is not available in Red Hat Enterprise Linux 7. gz. 7 lsi_mr3 driver: Checking using the perccli add in, looks good: Jan 13, 2016 · Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. Method 4/ megacli (not supported) Third method is leveraging LSI megacli utility. 16. May 10, 2021 · The standard combination of Shift+Click and CTRL+Click can be used to make multiple selections in the device list. Dell PERC is manufactured by LSI so it should work. That’s it. As a root user, run . Nagios/Opsview plugin to check status of PowerEdge RAID Controller - GitHub - peterpakos/check_perccli: Nagios/Opsview plugin to check status of PowerEdge RAID Controller Apr 08, 2019 · For more information see the PERCCLI Utility supporting VMWare for all PERC9 Controllers page. Sintomi: Durante l'aggiornamento firmware tramite IDRAC di un server DELL, compare il seguente errore: OSD35: Lifecycle Controller is not enabled. py. Dell uses raid controllers from LSI. Systems Engineer. 0, A09. Right-click in the list, hover over Scripts, and select One-time script. Unfortunately OMSA with Debian/Ubuntu is hit-or-miss. 00: Noted is a cli note taking and todo app similar to google keep or any other note taking service. To check the attached LUN from a storage device in Linux, we can use the /proc/scsi/scsi file content but it will give you some information and you can not be able to distinguish physical attached drive to LUN. This knowledgebase article cross references commands for the LSI 3ware tw_cli ( CLIGuide_10. Aug 08, 2021 · Install the iDrac RACADM software using the apt-get command. Note that fdisk, while fdisk is easier to use, parted is more robust for ext4 file systems. 10. 1327. Like a live CD or DVD, a bootable USB drive lets you run practically any Linux distribution without affecting your computer. · 8m. Yep H710 recognised: What’s more is that it’s using the in box ESXi 6. 4. I would use perccli or use ctrl+r from the boot screen to go into the PERC controller (like BIOS setup but just for PERC) I use perccli on ESXi boxes, haven't used it on Linux, but it should be able to do what you want. level 1. Copy. Rel Date Filename Importance Ver: Rev: Dell Server Update Utility Linux 64 bit Format v. /build_oem. 0127. dell. 010. Chọn tới mục system > Drivers & Downloads và lọc theo chủ đề SAS RAID hoặc sử dụng keyword PERCCLI; Cài đặt gói percli RPM, chạy lệnh sau để cài đặt $ rpm -ivh . 8 and later (32-bit and 64-bit) • Red Hat Enterprise Linux version 6. com DA: 12 PA: 42 MOZ Rank: 55 Regarding the storcli utility. It is used to configure and manage RAID disk groups, virtual disks, and physical disks. In this post we will walk through how to install and manage Dell RAID in VMware ESXi 6. The repository includes OpenManage Server Administrator (OMSA), iDRAC Service Module (iSM) and Deployment Tool Kit (DTK). LINUX PERCCLI Utility For All Dell HBA/PERC Controllers - and the starting point for command line utilities LSI MegaRAID SAS - some notes on the CLI utilities Doing battle with a Dell R620 and Ubuntu - has some remarks on H310 testing. 1 Update 2 and later • VMware ESXi 5. Version. 0000-1. My intention is to create a virtual device with type=raid6 allocating only 10gb. Step 5: Test the install. Reading package lists Done Building dependency tree Reading state information Done The following additional packages will be installed: libargtable2-0 srvadmin-hapi srvadmin Jan 13, 2016 · Syntax is perccli /c0/e32/s4 show all; Downside of this method is that perccli binaries exist just for windows or linux so you cannot use it directly from ESXi and you have to boot for example Linux live CD. perccli /c0 show eventloginfo enter the command fdisk -l. MegaCLI Mar 15, 2021 · 1) Check attached LUN or SAN disk in Linux. Please Note. Here is the command output: Copy to Clipboard. 2_codeset. Red Hat ® Enterprise Linux 5. Note: remember that VUM will build a custom and automatically baseline specific for vSAN clusters. Download the Dell EMC OpenManage Deployment Toolkit (Linux) DTK ISO file and mount it on /mnt. 1. Dec 27, 2018 · Manage firmware update with vSAN. Utility will, by default, install in /opt/MegaRAID/perccli/. vib --force. 1 VMware 6. coker. au The BIOS Configuration Utility, ( ), is a storage management application embedded on the PERC 9 cards that configure and maintain RAID disk groups and virtual disks. perccli64 /c0 show. deb being copied into common/files in /on-imagebuilde Run . 00 The utility is supported on PERC Series 8 and newer family controllers on host running Windows, Linux, or ESXi. The Dell H700 is using this chipset: # lspci -v | grep LSI 01:00. During POST, press F2 to enter System Setup. 5 with PERCCLI utility. 5 running a DAS setup, I was able to pull down the PERCCLI utility for ESXi 6. 5 and install on the host to manage RAID. With VMware vSAN you can use VMware vSphere Update Manager (VUM) to update all the software part, but it can also be useful to manage some hardware related updates. Change directory to /opt/MegaRAID/perccli. 1 and ESXi 4. /perccli. (as at 14 October 2015) Step 2: Copy the file to an appropriate location on your Linux machine. Mar 22, 2020 · From the output, please note the value EID:Slt of the first two hard drives you want to use. This is why the flash process from h330 to hba330 works well. Y: Download the Linux PERCCLI utility from Dell support site. com/support/home/us/en/19/drivers/driversdetails?driverId=NF8G9 Perform the following procedures to access the command prompt in systems using the Linux operating system: 1. 2. Sep 10, 2020 · Let’s exit out of the H710 configuration utility and continue to boot back into ESXi 6. 0 Warranty Up to five-year warranty available for controller (up to the length of purchased system warranty) Three-year warranty for battery ©2016 Dell Inc. 04 LTS. Red Hat Enterprise Linux 7. Now to use utility with node_exporter you need script that will run perccli utility and format output so prometheus is able to use it. com DA: 12 PA: 42 MOZ Rank: 55. In this article you will find a collection of useful commands to administer your MegaRAID controller. Now you can manage firmware update integrated with VUM update/upgrade process. vib --no-sig-check where /vmfs/volume/datastore1 is the path detail of the VIB. Refer the below availability matrix for supported operating system The UEFI (Unified Extensible Firmware Interface) RAID configuration utility is a storage management application integrated into the System BIOS . Dell EMC OpenManage Ubuntu and Debian Repositories. Display the content as below as below. Aug 16, 2019 · It appears that megacli is more compatible with the dell rom than megarec3 is. This document is a WORK IN PROGRESS. Apr 09, 2020 · Version 7. This utility is independent of the operating system. 1. Nov 20, 2019 · Introduction. cpio. 4 Run perccli by browsing to the following location: cd /opt/lsi/perccli. StorCLI (Command Line) Utility for Storage Management Adapters Supported: ServeRAID C100 for System x (90Y4322) ServeRAID C105 for IBM System x (RAID mode) (90Y4386) ServeRAID M1215 SAS/SATA Controller (46C9114) LSI SAS3004 RAID for NA-Newport RAID ServeRAID M5210 SAS/SATA Controller for (46C9110) ServeRAID M5225-2GB The utility was renamed from MegaCli (MegaCli64, megacli) to storcli (storcli64) We have new controllers like AVAGO MegaRAID SAS-9361-4i and really old ones like LSI 2108 MegaRAID (in fact Supermicro AOC-USAS2LP-H8iR ) and the two controllers could be manage with the new cli. According to the manual (see link), this is acheived with for example: The sg3_utils package provides the rescan-scsi-bus. Change the directory to /opt/MegaRAID/perccli. Finding it was a bit harder, but here is the latest version of the software. /dev/sda2 6144 58593279 58587136 28G Linux User's Guide ARCCONF Command Line Utility. In this article, you will learn how to install MegaCLI and set up a hardware RAID. See full list on etbe. eruffini. At the prompt, type the command. Apr 03, 2020 · 1. 4-1: 0: 0. May 26, 2016 · Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. In this case, we will use /var/tmp/. Open a command prompt and cd to extracted location (ex; If you download the file to your Downloads folder, you can navigate to that directory using the following command cd C:\Users\user_name\Downloads\) 3; Run "perccli" or "perccli64" -help for a list of Dell's perccli binary is used instead of megacli for perc class 8 and newer Reading status . 5 SUSE® Linux Enterprise Server 10 SP4 SUSE Linux Enterprise Server 11 SP3 Virtualization options: VMware® ESXi 5. 04 and rather old, so I decided to try out this third-party utility instead. /perccli64 /c0 show all Changing mode to writeback perccli /c0/v0 set wrcache=wb Changing mode to writethru (for SSDs) perccli /c0/v0 set wrcache=wt MySQL performance. 2021-01-07: Aug 07, 2014 · DEll Centos Linux Raid driver install & monitor. It manages and reports on MegaRAID SAS cards. NOTE: Use the BIOS Configuration Utility ( ) for initial setup and disaster recovery. 0. com. StorCLI is the successor of the MegaCLI and allows Command Line Tools to manage and control LSI MegaRAID controllers. tar. Cheat sheets¶. Soluzione: Gli step successivi ci consentono di abilitare manualmente il PERCCLI Utility For All PERC9 Controllers: C4130 SATA drive. For a detailed summary of the RAID controller, this will include the virtual drive and physical drive status. zip or Latest Megacli download) and StorCLI ( Click here for User's Guide or StorCLI download ). overlay. 26. /dev/sda2 6144 58593279 58587136 28G Linux When there are many requests sent to the 'perccli' utility it may become stuck and respond with empty answer. That took me to MegaRAID SAS 9260-8i, click on the "Downloads" tab The perccli command can also show you a lot of drive info if you ask it nicely: # /opt/MegaRAID/perccli/perccli64 /c0/e32/s0 show all Controller = 0 Status = Success Description = Show Drive Information Succeeded. raid. linux dup: SanDisk D417 for model number(s) LT0200MO LT0400MO LT0800MO LT1600MO LT0200WM LT0400WM LT0800WM LT0800RO and LT1600RO. 3 You can remove the installed VIB by using the command: esxcli software vib remove -n=vmware-esx-perccli. In this task, use the PERCCLI utility to perform the following tasks: Verifying that all the disks are in UGood (unconfigured, but good) status Removing all the existing VDs from the node Setting up the controller card boot parameter Mar 17, 2020 · Have fun with perccli! BStrauss3 commented on 2020-06-13 19:10 Dell have updated to 7. The megactl utility should therefore work with all PERC raid controllers. I am trying to add a virtual drive on a configuration consisting of megaraid 9271-i8, an entel expander board and the cachecade module. 00_a09_linux. 0, PCI-E 4. Select your system, then Drivers & downloads filtering by category SAS RAID or by using the keyword PERCCLI. fdisk is a dialog-driven program for the creation and manipulation of partition tables and understands GPT, MBR, Sun, SGI, and BSD partition tables. g. Date. May 10, 2017 · OEM roles provision_dell_raid_overlay and provision_secure_erase_overlay require perccli_1. gz image in /tmp/on-imagebuilder/build LibstorageMgmt megaraid plugin allows user to manage LSI MegaRAID via vendor tool storcli[1] or Dell PERC via perccli[2]. 0 and later 10 Apr 08, 2021 · Version 7. Firstly check details of the controller, enter: tw_cli show 5. sh script, which can automatically update the logical unit configuration of the host as needed (after a device has been added to the system). Notes appear as cards. Answer. 0318 and have changed the download folder and the sha checksum and the folder structure LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. Size Driver. There is a python script on node_exporter github https://github. Then create the RAID with the following command: perccli /c0 add vd type=raid1 drives=32:0-1. perccli /c0 show eventloginfo 0 3ware 9000 Storage Controller device driver for Linux v2. In working recently with a new 14G PowerEdge R740 server loaded with ESXi 6. Go to iDRAC Settings -> Lifecycle Controller, select enable, and save the changes

Sours: http://steelline.biz/boov
  1. Waterline square apartments
  2. Crochet braid pattern
  3. Tmobile i phones

Linux perccli utility

You can make lists and write random ideas. Change the directory to /opt/MegaRAID/perccli. deb being copied into common/files in /on-imagebuilde Run . 00: Noted is a cli note taking and todo app similar to google keep or any other note taking service. 0, Upcoming 24Gbps, New HBA’s and RAID cards, SlimSAS, My New “Cables” and the new SFF Connector: The Future Is Here, Bois. StorCLI is the successor of the MegaCLI and allows Command Line Tools to manage and control LSI MegaRAID controllers. Working with the Linux Rescue System. Utility will, by default, install in /opt/MegaRAID/perccli/. Version. /dev/sda2 6144 58593279 58587136 28G Linux User's Guide ARCCONF Command Line Utility. In this case, we will use /var/tmp/. Ubuntu Server 18. noarch. 04 and rather old, so I decided to try out this third-party utility instead. To check the attached LUN from a storage device in Linux, we can use the /proc/scsi/scsi file content but it will give you some information and you can not be able to distinguish physical attached drive to LUN. Feb 05, 2018 · rpm -ivh /tmp/perccli-1. In this task, use the PERCCLI utility to perform the following tasks: Verifying that all the disks are in UGood (unconfigured, but good) status Removing all the existing VDs from the node Setting up the controller card boot parameter Mar 17, 2020 · Have fun with perccli! BStrauss3 commented on 2020-06-13 19:10 Dell have updated to 7. LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. 0000. eruffini. 0318 and have changed the download folder and the sha checksum and the folder structure LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. This document is a WORK IN PROGRESS. Operating System. coker. Right-click in the list, hover over Scripts, and select One-time script. Dell. Method 4/ megacli (not supported) Third method is leveraging LSI megacli utility. The 'megaraid_lsmplugin' executable file is for libStorageMgmt daemon to execute when client user specifies megaraid plugin in the URI. even the old controller, which is on more than 8 years could be Jul 30, 2021 · Ubuntu is the modern, open source operating system on Linux for the enterprise server, desktop, cloud, and IoT. LINUX PERCCLI Utility For All Dell HBA/PERC Controllers - and the starting point for command line utilities LSI MegaRAID SAS - some notes on the CLI utilities Doing battle with a Dell R620 and Ubuntu - has some remarks on H310 testing. The Rescue System is an important tool for diagnosing and repairing issues with your server’s system. Open a command prompt and cd to extracted location (ex; If you download the file to your Downloads folder, you can navigate to that directory using the following command cd C:\Users\user_name\Downloads\) 3; Run "perccli" or "perccli64" -help for a list of Dell's perccli binary is used instead of megacli for perc class 8 and newer Reading status . Firstly check details of the controller, enter: tw_cli show 5. All of them should be treated with caution. That’s it. H310 and Fan Noise Tiến hành theo các bước sau để cài đặt PERCCLI lên Linux OS: Download Linux PERCCLI utility từ trang chủ Dell. 4-1: 0: 0. The megactl utility should therefore work with all PERC raid controllers. There is a python script on node_exporter github https://github. 3_007. May 26, 2016 · Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. vib --no-sig-check where /vmfs/volume/datastore1 is the path detail of the VIB. Aug 16, 2019 · The only time this character would a letter "o" is when using sas3flsh utility to give it the elevated privileges mode prior to flashing, ex: sas3flsh -o-f hba330. Apr 03, 2020 · 1. bin. 7: Once ESXi boots, lets take a look at the ESXi host Web client. Dell EMC OpenManage Ubuntu and Debian Repositories. 2_codeset. rpm. Copy. Nagios/Opsview plugin to check status of PowerEdge RAID Controller - GitHub - peterpakos/check_perccli: Nagios/Opsview plugin to check status of PowerEdge RAID Controller Apr 08, 2019 · For more information see the PERCCLI Utility supporting VMWare for all PERC9 Controllers page. The Dell-provided CLI-raid-utility is for Ubuntu 16. 0 Warranty Up to five-year warranty available for controller (up to the length of purchased system warranty) Three-year warranty for battery ©2016 Dell Inc. Dell PERC is manufactured by LSI so it should work. During POST, press F2 to enter System Setup. This is Dell EMC OpenManage repository for Ubuntu Server LTS and selected Debian releases support. Intro. 0127. For Dedicated Servers acquired before 28-10-2018 and Server Deals. This is why the flash process from h330 to hba330 works well. 4. com/prometheus/node_exporter/tree/master/text_collector_examples named storecli. Unfortunately OMSA with Debian/Ubuntu is hit-or-miss. 0, PCI-E 4. Notes appear as cards. This is just a quick personnal cheatsheet: treat its contents with caution! Bootable media: how to get a live-usb¶. . Dec 27, 2018 · Manage firmware update with vSAN. Answer. Download the Dell EMC OpenManage Deployment Toolkit (Linux) DTK ISO file and mount it on /mnt. tar. 1327. Date. Enter the Endura Linux commands needed under Script Commands. 29 MB. Red Hat Enterprise Linux 7. Once in the PERC Configuration Utility use Ctrl+ N to switch between the tabs, below you can see the Virtual Disk Management page and the missing disk. Cheat sheets¶. Copy to Clipboard. May 10, 2017 · OEM roles provision_dell_raid_overlay and provision_secure_erase_overlay require perccli_1. com/support/home/us/en/19/drivers/driversdetails?driverId=NF8G9 Perform the following procedures to access the command prompt in systems using the Linux operating system: 1. For a detailed summary of the RAID controller, this will include the virtual drive and physical drive status. py. /perccli. sh script, which can automatically update the logical unit configuration of the host as needed (after a device has been added to the system). Red Hat ® Enterprise Linux 5. 2 and later (64-bit) • SUSE Linux Enterprise Server version 10 SP4 (64-bit) • SUSE Linux Enterprise Server version 11 SP2 (64-bit) • VMware ESX 4. g. I am trying to add a virtual drive on a configuration consisting of megaraid 9271-i8, an entel expander board and the cachecade module. Sintomi: Durante l'aggiornamento firmware tramite IDRAC di un server DELL, compare il seguente errore: OSD35: Lifecycle Controller is not enabled. LSI Command Line Interface cross reference MegaCLI vs tw_cli vs Storcli. com DA: 12 PA: 42 MOZ Rank: 55 Regarding the storcli utility. See full list on etbe. Windows PERCCLI Utility For All PERC Controllers Dell. It is used to configure and manage RAID disk groups, virtual disks, and physical disks. NOTE: Use the BIOS Configuration Utility ( ) for initial setup and disaster recovery. 4 Run perccli by browsing to the following location: cd /opt/lsi/perccli. dell. Sep 10, 2020 · Let’s exit out of the H710 configuration utility and continue to boot back into ESXi 6. 00 The utility is supported on PERC Series 8 and newer family controllers on host running Windows, Linux, or ESXi. type=raid1 for RAID-1 or type=raid5 for RAID-5. 2021-01-07: Aug 07, 2014 · DEll Centos Linux Raid driver install & monitor. level 1. /dev/sda2 6144 58593279 58587136 28G Linux When there are many requests sent to the 'perccli' utility it may become stuck and respond with empty answer. Here, you simply enter the RAID level you want under type, e. 7. Something like that "perccli-007. Before you create the database make sure that you either run Locking utility for smart cards: ges: noted-cli-git: 0. Aug 08, 2021 · Install the iDrac RACADM software using the apt-get command. fdisk is a command line utility for partitioning disks. If this happens during deployment, the deployment may fail during VD creation on the physical disks. 1212. 1 VMware 6. May 10, 2021 · The standard combination of Shift+Click and CTRL+Click can be used to make multiple selections in the device list. As an example, let’s list all the logical volumes • Red Hat Enterprise Linux version 5. 11. StorCLI (Command Line) Utility for Storage Management Adapters Supported: ServeRAID C100 for System x (90Y4322) ServeRAID C105 for IBM System x (RAID mode) (90Y4386) ServeRAID M1215 SAS/SATA Controller (46C9114) LSI SAS3004 RAID for NA-Newport RAID ServeRAID M5210 SAS/SATA Controller for (46C9110) ServeRAID M5225-2GB Challenge Modal HTML. com DA: 12 PA: 42 MOZ Rank: 55. To enable Lifecycle Controller, reboot the server. LINUX PERCCLI Utility For All Dell HBA/PERC Controllers https://www. 26. Refer the below availability matrix for supported operating system The UEFI (Unified Extensible Firmware Interface) RAID configuration utility is a storage management application integrated into the System BIOS . overlay. In this post we will walk through how to install and manage Dell RAID in VMware ESXi 6. 8 and later (32-bit and 64-bit) • Red Hat Enterprise Linux version 6. zip or Latest Megacli download) and StorCLI ( Click here for User's Guide or StorCLI download ). pdf ), LSI MegaRAID MegaCLI ( Software guide 51530-00_RevO. 0000-1. · 8m. Rel Date Filename Importance Ver: Rev: Dell Server Update Utility Linux 64 bit Format v. Apr 09, 2020 · Version 7. *** Use Gnu-zip or other unzip utility to open the file and find the Linux directory. This utility is independent of the operating system. Apr 23, 2019 · Could it be that perccli is just their name for the tool which has the same parameters like storcli? Could you try a simple symbolic link so that /usr/sbin/storcli is a symlink to the perccli tool? Copy link Jan 14, 2015 · Dell PERC command-line utility program perccli This tool apparently works for all PERC9 controllers and the following operating systems are supported: Novell SuSE Linux ES 11 MS Windows Server 2012 Red Hat Ent Linux 6 Red Hat Ent Linux 7 SUSE Linux ES 12 MS Windows Server 2012 R2/SP MS Windows 2008 R2 perccli /c0 show eventloginfo enter the command fdisk -l. 5 SUSE® Linux Enterprise Server 10 SP4 SUSE Linux Enterprise Server 11 SP3 Virtualization options: VMware® ESXi 5. 02. Usually you have to check BIOS version (for example for Spectre and Meltdown bugs ), but also the other firmware. linux dup: SanDisk D417 for model number(s) LT0200MO LT0400MO LT0800MO LT1600MO LT0200WM LT0400WM LT0800WM LT0800RO and LT1600RO. StorCLI (Command Line) Utility for Storage Management Adapters Supported: ServeRAID C100 for System x (90Y4322) ServeRAID C105 for IBM System x (RAID mode) (90Y4386) ServeRAID M1215 SAS/SATA Controller (46C9114) LSI SAS3004 RAID for NA-Newport RAID ServeRAID M5210 SAS/SATA Controller for (46C9110) ServeRAID M5225-2GB The utility was renamed from MegaCli (MegaCli64, megacli) to storcli (storcli64) We have new controllers like AVAGO MegaRAID SAS-9361-4i and really old ones like LSI 2108 MegaRAID (in fact Supermicro AOC-USAS2LP-H8iR ) and the two controllers could be manage with the new cli. My intention is to create a virtual device with type=raid6 allocating only 10gb. That took me to MegaRAID SAS 9260-8i, click on the "Downloads" tab The perccli command can also show you a lot of drive info if you ask it nicely: # /opt/MegaRAID/perccli/perccli64 /c0/e32/s0 show all Controller = 0 Status = Success Description = Show Drive Information Succeeded. 03-1_all. Aug 16, 2019 · It appears that megacli is more compatible with the dell rom than megarec3 is. We are processing your request. 0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev 05) Visit the support section of LSI's site, the 9260 is part of the "MegaRAID Value Line". Step 5: Test the install. At the prompt, type the command. The next tab, Physical Disk Management shows the new foreign disk in slot 0. fw. It is a fork of my previous project keep-cli. fdisk is a dialog-driven program for the creation and manipulation of partition tables and understands GPT, MBR, Sun, SGI, and BSD partition tables. To install the percli RPM, run rpm -ivh , or to upgrade the percli RPM, run rpm -Uvh . Seriously. is independent of the operating system. 1 Update 2 and later • VMware ESXi 5. Soluzione: Gli step successivi ci consentono di abilitare manualmente il PERCCLI Utility For All PERC9 Controllers: C4130 SATA drive. 16. perccli_d6ywp_7. Finding it was a bit harder, but here is the latest version of the software. rpm" without quote. It would seem that dell modelled their proprietary "perccli" utility off of storcli, which is just a "newer" megacli. raid. As a root user, run . This article describes how to enlarge a partition with fdisk. 2. Select your system, then Drivers & downloads filtering by category SAS RAID or by using the keyword PERCCLI. 04 LTS. perccli /c0 show eventloginfo enter the command fdisk -l. The Dell H700 is using this chipset: # lspci -v | grep LSI 01:00. 3. 8 Red Hat Enterprise Linux 6. Using perccli with Dell PE R710 and Perc 6/i. However, resizing with parted is not available in Red Hat Enterprise Linux 7. Wait a little until the sampler successfully samples the 'perccli' utility, and then click "Retry". 7 lsi_mr3 driver: Checking using the perccli add in, looks good: Jan 13, 2016 · Reboot the server and during start up when prompted press Ctrl + R to enter the Raid Configuration Utility. SCI-41950 SR# 13244526 Jan 13, 2016 · Syntax is perccli /c0/e32/s4 show all; Downside of this method is that perccli binaries exist just for windows or linux so you cannot use it directly from ESXi and you have to boot for example Linux live CD. It manages and reports on MegaRAID SAS cards. Change directory to /opt/MegaRAID/perccli. Most of them are still Work In Progress. Chọn tới mục system > Drivers & Downloads và lọc theo chủ đề SAS RAID hoặc sử dụng keyword PERCCLI; Cài đặt gói percli RPM, chạy lệnh sau để cài đặt $ rpm -ivh . *** Put the file in the root home directory and then use the command to install. com. 03-1. Mar 22, 2020 · From the output, please note the value EID:Slt of the first two hard drives you want to use. Display the content as below as below. Reading package lists Done Building dependency tree Reading state information Done The following additional packages will be installed: libargtable2-0 srvadmin-hapi srvadmin Jan 13, 2016 · Syntax is perccli /c0/e32/s4 show all; Downside of this method is that perccli binaries exist just for windows or linux so you cannot use it directly from ESXi and you have to boot for example Linux live CD. sh to build the overlayfs This should create the dell. Then create the RAID with the following command: perccli /c0 add vd type=raid1 drives=32:0-1. Yep H710 recognised: What’s more is that it’s using the in box ESXi 6. You can use advanced features through Dell OpenManage storage management application and Dell Jan 18, 2021 · Then, just type: perccli /c0 download file=pathtofirmwarefile (Where “pathtofirmwarefile” is the location to where you saved the new firmware) For example, if you saved the firmware file to your desktop: perccli /c0 download file=C:\Users\Techdude\Desktop\hba345. Launch an administrative command prompt (START > RUN or Search Bar > CMD - right-click the command prompt icon and select 'Run as administrator') 2. apt-get install srvadmin-idracadm8. Please Note. zashen: nv-card-pm Dec 18, 2020 · Updating the Firmware on the new Dell HBA345 Card (Same as for the LSI 9400-8i/16i) Using Perccli and Storcli in EFI, Linux and Windows only; SAS 4. Here is the command output: Copy to Clipboard. perccli64 /c0 show. /build_oem. Note: remember that VUM will build a custom and automatically baseline specific for vSAN clusters. The utility will find the firmware and update your card. Jul 19, 2018 · There is a utility from LSI called lsiutil; you can try storcli - there are some guides on how to use it; you can try perccli from Dell, however it comes as an rpm package and you will have to use the alien command (install it from apt install alien) and allow scripts; esx-perccli. 3 You can remove the installed VIB by using the command: esxcli software vib remove -n=vmware-esx-perccli. Second Gen LSI Cards: The Low Maintenence Girlfriend Dell OpenManage. With VMware vSAN you can use VMware vSphere Update Manager (VUM) to update all the software part, but it can also be useful to manage some hardware related updates. (as at 14 October 2015) Step 2: Copy the file to an appropriate location on your Linux machine. 1. In this article, you will learn how to install MegaCLI and set up a hardware RAID. vib --force. 14 Oct 2020 LINUX PERCCLI Utility For All Dell HBA/PERC Controllers. Information. Download the OpenManage software ISO image from the R640_downloads page in the Systems Management download category. Aug 07, 2014 · Step 1: Seems like LSI was taken over by another company. Like a live CD or DVD, a bootable USB drive lets you run practically any Linux distribution without affecting your computer. Note that fdisk, while fdisk is easier to use, parted is more robust for ext4 file systems. Systems Engineer. Y: Download the Linux PERCCLI utility from Dell support site. Go to iDRAC Settings -> Lifecycle Controller, select enable, and save the changes. Nov 20, 2019 · Introduction. In this article you will find a collection of useful commands to administer your MegaRAID controller. This knowledgebase article cross references commands for the LSI 3ware tw_cli ( CLIGuide_10. 0, A09. In this article you will learn how to use the rescue system of your Dedicated Server. 2 Accessing the command prompt 7 I just tried this and it seems to work fine now. MegaCLI Mar 15, 2021 · 1) Check attached LUN or SAN disk in Linux. I would use perccli or use ctrl+r from the boot screen to go into the PERC controller (like BIOS setup but just for PERC) I use perccli on ESXi boxes, haven't used it on Linux, but it should be able to do what you want. Megarec is more like a recover and "rinse clean" sort of utility. Size Driver. 00_a09_linux. you can find the rpm file in it. According to the manual (see link), this is acheived with for example: The sg3_utils package provides the rescan-scsi-bus. 0 and later 10 Apr 08, 2021 · Version 7. 5 and install on the host to manage RAID. Now you can manage firmware update integrated with VUM update/upgrade process. Whitehadow Challenge Frame. perccli /c0 show eventloginfo 0 3ware 9000 Storage Controller device driver for Linux v2. 5 running a DAS setup, I was able to pull down the PERCCLI utility for ESXi 6. /perccli64 /c0 show all Changing mode to writeback perccli /c0/v0 set wrcache=wb Changing mode to writethru (for SSDs) perccli /c0/v0 set wrcache=wt MySQL performance. Dell uses raid controllers from LSI. MegaCLI is a tool used as a command-line interface to communicate with the LSI family of RAID controllers. 5 with PERCCLI utility. 10. 1 and ESXi 4. 0. au The BIOS Configuration Utility, ( ), is a storage management application embedded on the PERC 9 cards that configure and maintain RAID disk groups and virtual disks. This project is just a collection of personnal cheat sheets, about various linux related topics. 010. gz. In working recently with a new 14G PowerEdge R740 server loaded with ESXi 6. Now to use utility with node_exporter you need script that will run perccli utility and format output so prometheus is able to use it. 1. gz image in /tmp/on-imagebuilder/build LibstorageMgmt megaraid plugin allows user to manage LSI MegaRAID via vendor tool storcli[1] or Dell PERC via perccli[2]. File Name. cpio. The repository includes OpenManage Server Administrator (OMSA), iDRAC Service Module (iSM) and Deployment Tool Kit (DTK). As for the bios issue for servers or pc's that refuse to boot or enumerate the bios after 3 minutes, there is one solution you can do that can actually bypass the bios enumeration. Device dependency on Linux operating system Downloading and installing the RAID controller log export by using PERCCLI tool on ESXi is a utility that collects Windows PERCCLI Utility For All PERC Controllers

Sours: http://steelline.biz/boov

We have covered the Avago/LSI StorCLI in past posts and how extremely useful it can be loaded on ESXi servers that have DAS volumes being presented with an Avago/LSI RAID controller. The advantage of loading/using the Avago/LSI StorCLI utility is we don’t have to reboot the host to start using it as the VIB install doesn’t require a reboot. If you run a Dell PowerEdge server with a PERC adapter as most know, these are based on Avago/LSI adapters. However, the vanilla StorCLI utility may not work, especially with 14G servers with the newest PERC adapters installed. If you are not already aware, Dell maintains a customized version of the StorCLI utility called PERCCLI that is available for downloaded with compatible systems. In working recently with a new 14G PowerEdge R740 server loaded with ESXi 6.5 running a DAS setup, I was able to pull down the PERCCLI utility for ESXi 6.5 and install on the host to manage RAID. In this post we will walk through how to install and manage Dell RAID in VMware ESXi 6.5 with PERCCLI utility.

Install Dell PERCCLI Utility in VMware ESXi 6.5

The process to install Dell PERCCLI Utility in VMware ESXi 6.5 is the same as installing the Avago/LSI StorCLI, however, below is a quick run through of installing the PERCLI on a 14G Dell PowerEdge R740 running VMware ESXi 6.5 U1.

To obtain the PERCCLI utility, simply plug in your service tag on the Dell Support site, and select either VMware 6.0 or VMware 6.5 for the operating system.  Note the format is a tar.gz package.

Download-PERCCLI-utility-from-Dell-Support-site

After using 7-zip or another utility to extract the tar.gz file, copy over the resulting vmware-perccli-xxx.xxxx.xxxx.xxxx.vib file to your VMware ESXi host.  I like to copy these types of installs over to the /tmp folder for a temporary landing spot for the installation file.

Spinbackup
Use-SCP-utility-to-copy-over-the-PERCCLI-vib-file

As with the Avago/LSI StorCLI utility, as you see below, when installing the PERCCLI utility, we are not required to reboot.  Again, it is extremely useful to know we do not have to maintenance mode the host or reboot to instantiate the PERCCLI utility.  As soon as the install is finished, we are ready to manage RAID.

esxcli software vib install -v /tmp/vmware-perccli-xxx.xxxx.xxxx.xxxx.vib --no-sig-check
Use-esxcli-command-to-install-the-vib-file-copied-over

Manage Dell RAID in VMware ESXi 6.5 with PERCCLI

Now that we have the PERCCLI utility installed on our VMware ESXi host, let’s take a look at the available commands and how we can manage Dell RAID in VMware ESXi 6.5 with PERCCLI.  To see all the commands and parameters available, we can simply run the ./perccli command.

To run the command make sure you are changed to the /opt/lsi/perccli directory.

./perccli
Listing-the-available-PERCCLI-commands

We can list the Dell PERC RAID controller itself, check availability, number of controllers etc.

./perccli show
Checking-controller-availability-with-PERCCLI

If we simply want to see the count of controllers installed in the system, we can use the below.

./perccli show ctrlcount
Viewing-available-controllers-with-PERCCLI

If we want to see the individual disks information, we can do that as well.

./perccli /c0/d0 show
Viewing-disk-information-with-PERCCLI-Dell-RAID-utility

Viewing the virtual disk information gives a wealth of information including the RAID type, Cache mode, Size, Name, etc.

./perccli /c0/v0 show
Viewing-virtual-disk-information-with-PERCCLI-utility

We can also query the status of our BBU unit installed as well.  This is helpful to troubleshoot any cache policy anomalies as well as to make sure the battery is cycling properly.

./perccli /c0/bbu show all
Checking-BBU-status-with-PERCCLI

The above are simple snippets of commands taken from the official Dell guide found here.  The guide includes all the other operations aside from simply getting information from the controller such as creating volumes, etc.

Thoughts

It is extremely easy to install and manage Dell RAID in VMware ESXi 6.5 with PERCCLI.  The utility is a simple install with no reboot required which is fantastic.  Additionally, we can pull a wealth of information using the command line within our VMware ESX 6.5 host as shown in the example above.  Additionally, the Dell PERCCLI utility is available for the newest Dell PowerEdge 14G servers.  If using Dell hardware, this is your go to utility for managing RAID within VMware ESXi.  Don’t rely on the latest StorCLI with Dell hardware as in my testing, it is not able to interact properly with Dell PERC RAID adapters especially in the newest PowerEdge servers.

Sours: https://www.virtualizationhowto.com/2017/11/manage-dell-raid-in-vmware-esxi-6-5-with-perccli/

Utility linux perccli

1. Intro

Dell uses raid controllers from LSI.

The megactl utility should therefore work with all PERC raid controllers.

The Dell-provided CLI-raid-utility is for Ubuntu 16.04 and rather old, so I decided to try out this third-party utility instead.

 

 

2. Assumptions

Using Debian Buster with a Dell R710 and PERC 6/i.

[email protected]:~# lspci -nn
...
03:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078 [1000:0060] (rev 04)
...

[email protected]:~# lsb_release -a          
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 10 (buster)
Release:        10
Codename:       buster
[email protected]:~#

 

 

 

3. Howto

  1. Add repo to OS. # echo "deb http://hwraid.le-vert.net/debian buster main" > /etc/apt/sources.list.d/hwraid.list
  2. Add repo key. # mkdir /root/Downloads
    # wget https://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key
    # apt-key add hwraid.le-vert.net.gpg.key
  3. Install megaraid-status and megacli. # apt-get install megaraid-status megacli
  4. Done. Test it out with the command in the tips and tricks part.

 

4. Command tricks and tips

In no particular order. These three command should get you going fairly quick.

 

4.1. Print the current controller status

[email protected]:~# megasasctl
a0       PERC 6/i Integrated      encl:1 ldrv:1  batt:FAULT, charging
a0d0      9312GiB RAID 5   1x6  optimal
a0e32s0    1863GiB  a0d0  online   
a0e32s1    1863GiB  a0d0  online   
a0e32s2    1863GiB  a0d0  online   
a0e32s3    1863GiB  a0d0  online   errs: media:0  other:22
a0e32s4    1863GiB  a0d0  online   
a0e32s5    1863GiB  a0d0  online   

[email protected]:~#

 

 

4.2. General raid status

[email protected]:~# megaraidsas-status
-- Arrays informations --
-- ID | Type | Size | Status
a0d0 | RAID 5 | 9312GiB | optimal

-- Disks informations
-- ID | Model | Status | Warnings
a0e32s0 | SEAGATE ST32000444SS 1863GiB | online
a0e32s1 | SEAGATE ST2000NM0001 1863GiB | online
a0e32s2 | SEAGATE ST32000444SS 1863GiB | online
a0e32s3 | SEAGATE ST32000444SS 1863GiB | online | errs: media:0 other:19
a0e32s4 | SEAGATE ST32000444SS 1863GiB | online
a0e32s5 | SEAGATE ST32000444SS 1863GiB | online
[email protected]:~#

 

 

4.3. Show logical drive 0 on adapter 0 status and type

Of particular interest is the Ongoing Progresses line, This raid array is initializing, and has been doing so for a while.

[email protected]:~# megacli -LDInfo -L0 -a0

Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :raid5-data
RAID Level          : Primary-5, Secondary-0, RAID Level Qualifier-3
Size                : 9.093 TB
Sector Size         : 512
Parity Size         : 1.818 TB
State               : Optimal
Strip Size          : 64 KB
Number Of Drives    : 6
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Ongoing Progresses:
 Background Initialization: Completed 53%, Taken 379 min.
Encryption Type     : None
Is VD Cached: No



Exit Code: 0x00
[email protected]:~#

 

4.4. Display and adjust automatic rebuild status on adapter 0

[email protected]:~# megacli -AdpAutoRbld -Dsply -a0
                                     
Adapter 0: AutoRebuild is Enabled.

Exit Code: 0x00

 

Info on rebuild rate on https://jackal777.wordpress.com/2015/05/29/adjust-raid-rebuild-rate/.

[email protected]:~# megacli -AdpGetProp RebuildRate -a0
                                     
Adapter 0: Rebuild Rate = 30%

Exit Code: 0x00
[email protected]:~# megacli -AdpSetProp RebuildRate 60 -a0
                                     
Adapter 0: Set rebuild rate to 60% success.

Exit Code: 0x00
[email protected]:~# megacli -AdpGetProp RebuildRate -a0    
                                     
Adapter 0: Rebuild Rate = 60%

Exit Code: 0x00
[email protected]:~#

The rebuild rate can be set for software raids as well. The keywords to note here are speed_limit_max and speed_limit_min.
Preferably set the max and min values to the same high number.

See eg this site for more information; https://www.cyberciti.biz/tips/linux-raid-increase-resync-rebuild-speed.html.

 

4.5. Show the physical disks on  adapter 0

The line Firmware state is of interest, this line states what the drive is doing, if anything.

 

# megacli -PDList -a0

Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 0
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: 0006
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50021457ca9
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: SEAGATE ST32000444SS 00069WM1TD7F
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :32C (89.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Enclosure Device ID: 32
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 1
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: XQB6
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c500415c7c75
SAS Address(1): 0x0
Connected Port Number: 1(path0)
Inquiry Data: SEAGATE ST2000NM0001 XQB6Z1P20GQ7
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :33C (91.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Enclosure Device ID: 32
Slot Number: 2
Drive's position: DiskGroup: 0, Span: 0, Arm: 2
Enclosure position: N/A
Device Id: 2
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: 0005
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50020ec234d
SAS Address(1): 0x0
Connected Port Number: 2(path0)
Inquiry Data: SEAGATE ST32000444SS 00059WM0FQ40
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :32C (89.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Enclosure Device ID: 32
Slot Number: 3
Drive's position: DiskGroup: 0, Span: 0, Arm: 3
Enclosure position: N/A
Device Id: 3
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 23
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: 0005
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50020e33c5d
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: SEAGATE ST32000444SS 00059WM0DWNJ
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :32C (89.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Enclosure Device ID: 32
Slot Number: 4
Drive's position: DiskGroup: 0, Span: 0, Arm: 4
Enclosure position: N/A
Device Id: 4
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: 0006
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c500214572bd
SAS Address(1): 0x0
Connected Port Number: 4(path0)
Inquiry Data: SEAGATE ST32000444SS 00069WM1TCNP
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :33C (91.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Enclosure Device ID: 32
Slot Number: 5
Drive's position: DiskGroup: 0, Span: 0, Arm: 5
Enclosure position: N/A
Device Id: 5
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: 0005
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c50020d36d4d
SAS Address(1): 0x0
Connected Port Number: 5(path0)
Inquiry Data: SEAGATE ST32000444SS 00059WM0GBJN
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :32C (89.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No


Exit Code: 0x00

 

If a drive is rebuilding, show the progress as below.

In this case the rebuilding drive is 32,1; ie enclosure id 32 and slot/drive 1.

# megacli -PDRbld -ShowProg -PhysDrv [32:1] -aALL

Rebuild Progress on Device at Enclosure 32, Slot 1 Completed 51% in 10 Minutes.

 

4.6. Battery status

More info about the battery. Keeping an eye on it may be a good idea.

See eg https://crtech.tips/understanding-your-perc-battery/ for more pertinent info.

[email protected]:~# megacli -AdpBbuCmd -GetBbuStatus -aALL

BBU status for Adapter: 0

BatteryType: BBU
Voltage: 4059 mV
Current: 79 mA
Temperature: 23 C
Battery State: Optimal
BBU Firmware Status:

 Charging Status              : Charging
 Voltage                                 : OK
 Temperature                             : OK
 Learn Cycle Requested                   : No
 Learn Cycle Active                      : No
 Learn Cycle Status                      : OK
 Learn Cycle Timeout                     : No
 I2c Errors Detected                     : No
 Battery Pack Missing                    : No
 Battery Replacement required            : No
 Remaining Capacity Low                  : No
 Periodic Learn Required                 : No
 Transparent Learn                       : No
 No space to cache offload               : No
 Pack is about to fail & should be replaced : No
 Cache Offload premium feature required  : No
 Module microcode update required        : No


GasGuageStatus:
 Fully Discharged        : No
 Fully Charged           : No
 Discharging             : No
 Initialized             : Yes
 Remaining Time Alarm    : No
 Discharge Terminated    : No
 Over Temperature        : No
 Charging Terminated     : No
 Over Charged            : No
Relative State of Charge: 96 %
Charger Status: In Progress
Remaining Capacity: 1198 mAh
Full Charge Capacity: 1252 mAh
isSOHGood: Yes

Exit Code: 0x00


[email protected]:~# megacli -AdpBbuCmd -a0

BBU status for Adapter: 0

BatteryType: BBU
Voltage: 4065 mV
Current: 0 mA
Temperature: 24 C
Battery State: Optimal
BBU Firmware Status:

 Charging Status              : None
 Voltage                                 : OK
 Temperature                             : OK
 Learn Cycle Requested                   : No
 Learn Cycle Active                      : No
 Learn Cycle Status                      : OK
 Learn Cycle Timeout                     : No
 I2c Errors Detected                     : No
 Battery Pack Missing                    : No
 Battery Replacement required            : No
 Remaining Capacity Low                  : No
 Periodic Learn Required                 : No
 Transparent Learn                       : No
 No space to cache offload               : No
 Pack is about to fail & should be replaced : No
 Cache Offload premium feature required  : No
 Module microcode update required        : No


GasGuageStatus:
 Fully Discharged        : No
 Fully Charged           : Yes
 Discharging             : Yes
 Initialized             : Yes
 Remaining Time Alarm    : No
 Discharge Terminated    : No
 Over Temperature        : No
 Charging Terminated     : Yes
 Over Charged            : No
Relative State of Charge: 100 %
Charger Status: Complete
Remaining Capacity: 1252 mAh
Full Charge Capacity: 1252 mAh
isSOHGood: Yes
 Battery backup charge time : 0 hours

BBU Capacity Info for Adapter: 0

 Relative State of Charge: 100 %
 Absolute State of charge: 70 %
 Remaining Capacity: 1252 mAh
 Full Charge Capacity: 1252 mAh
 Run time to empty: Battery is not being charged.   
 Average time to empty: Battery is not being charged.   
 Estimated Time to full recharge: Battery is not being charged.   
 Cycle Count: 38
Max Error = 2 %
Remaining Capacity Alarm = 180 mAh
Remining Time Alarm = 10 Min

BBU Design Info for Adapter: 0

 Date of Manufacture: 08/09, 2009
 Design Capacity: 1800 mAh
 Design Voltage: 3700 mV
 Specification Info: 49
 Serial Number: 3149
 Pack Stat Configuration: 0x0014
 Manufacture Name: SMP-PA1.9
 Firmware Version   :  
 Device Name: DLFR463
 Device Chemistry: LION
 Battery FRU: N/A
 Transparent Learn = 0
 App Data = 0

BBU Properties for Adapter: 0

 Auto Learn Period: 90 Days
 Next Learn time: Fri May 29 15:34:32 2020
 Learn Delay Interval:0 Hours
 Auto-Learn Mode: Enabled

Exit Code: 0x00
[email protected]:~#

 

 

 

 

 

5. Sources

https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=52r3d (Ubuntu 16.04)

https://cetre.co.uk/blog/monitoring-perc-raid-controllers-and-storage-arrays-on-dell-poweredge-servers-with-debian-and-ubuntu/

http://hwraid.le-vert.net/wiki/LSIMegaRAIDSAS

https://jackal777.wordpress.com/2015/05/29/adjust-raid-rebuild-rate/

https://crtech.tips/understanding-your-perc-battery/

https://www.cyberciti.biz/tips/linux-raid-increase-resync-rebuild-speed.html

 

 

 

 

 

 

 

 

 

Details
Written by Sorin Srbu
Hits: 1086
Sours: https://srbu.se/index.php/icon-fa-list-alt-icon-articles/13-linux-et-al/211-using-perccli-with-dell-pe-r710-and-perc-6-i
Using PercCLI in Windows

peterpakos / check_perccli Public

Nagios/Opsview plugin to check status of PowerEdge RAID Controller

The script connects via SSH to a machine with an installed PERC card, runs PERCCLI utility then parses its output.

If you spot a problem or have an improvement idea then feel free to open an issue and I will be glad to look into it for you.

Installation

The machine which is being monitored needs to have PERCCLI (successor to MegaCLI) installed. It's a command line tool to manage and monitor Dell RAID controllers. The utility is available for VMware, Linux and Windows systems.

The script is normally copied to Nagios/Opsview plugins directory (/usr/local/nagios/libexec/).

Usage

Sample output - no issues detected:

Sample output - drive rebuilding, virtual drive degraded:

Debug output:

Help

Sours: https://github.com/peterpakos/check_perccli

Similar news:

# Copyright 1999-2018 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 EAPI=7 inherit mount-boot rpm DESCRIPTION="LINUX PERCCLI Utility For All Dell HBA/PERC Controllers" HOMEPAGE="https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=NF8G9" LICENSE="Avago BSD" SLOT="0" KEYWORDS="-* ~amd64 ~x86" IUSE="doc efi" RESTRICT="strip" DEPEND="" RDEPEND="" QA_PREBUILT="opt/MegaRAID/perccli/perccli* boot/efi/perccli.efi" DISTFILE_DOC=dell-sas-hba-12gbps_reference-guide_en-us.pdf SRC_URI="https://downloads.dell.com/FOLDER05235308M/1/perccli_linux_NF8G9_A07_7.529.00.tar.gz doc? ( https://topics-cdn.dell.com/pdf/${DISTFILE_DOC} )" S="${WORKDIR}"/perccli_7.5-007.0529_linux src_unpack() { default cd "${S}" rpm_unpack ./Linux/perccli-*.rpm } src_install() { exeinto /opt/MegaRAID/perccli/ use amd64 && doexe opt/MegaRAID/perccli/perccli64 && \ dosym perccli64 /opt/MegaRAID/perccli/perccli use x86 && doexe opt/MegaRAID/perccli/perccli dosym ../MegaRAID/perccli/perccli /opt/bin/perccli if use efi; then exeinto /boot/efi/ doexe EFI/perccli.efi fi use doc && dodoc "${DISTDIR}"/${DISTFILE_DOC} }
Sours: https://old.calculate-linux.org/packages/sys-block/perccli/perccli-7.5.007.0529.ebuild


5278 5279 5280 5281 5282