Husky cordless ratchet review

Husky cordless ratchet review DEFAULT
All new Husky 12V Ratchet H38CPRAT34PC

Provided by the Home Depot Prospective Program for review

This week we had the chance to work with the all new Husky 12V 3/8” ratchet, and liked what we saw. It’s a heavy duty ratchet that really stands out in the Husky line because of one very cool feature; it’s rechargeable.

Husky has been turning up the heat on their main competitor Craftsman by coming out with some really nice hand tools that ultimately have a lifetime guarantee and (no questions asked) return policy. Though they are mostly known for socket sets, wrenches and tool boxes, Husky is going all in with their all new 12V rechargeable ratchet.    

The 12-Volt Lithium-Ion Cordless Ratchet also comes with a 34 piece socket set, AC charger, and a really nice hard-shell case to keep everything protected.  

One of the nice things about this ratchet is that is has a variable speed trigger which allows you to control the speed of the motor when removing or installing a fastener. It’s super smooth and easy to control how tight each fasteners gets.

As for built, it’s extremely solid with a thick outside casing that will take a lot of abuse. That being said, it is a bit heavier as it weighs 3.8 lbs, not to mention it’s a rather big tool with a length of 10.75”. It is however built tough enough to work in some of the toughest environments

As for power, it’s not going to help you win any NASCAR races, but it does pack a punch. Here are the ratings below:

1       1.Powered torque up to 30 ft./lbs.

2        2. Manual torque up to 150 ft./lbs.

3       3. Quickly install or remove fasteners with the 230 RPM motor

As for other features, the Husky 12V ratchet is rechargeable and takes about 1.5 hours for a full charge using the provided A/C adaptor. We noticed that it does hold a charge well, but you can’t replace the battery with a new one once drained. They also included a LED battery fuel gauge on the handle to keep you informed on how much battery life you have remaining. It also has an overload protection to prevent damage to the tool. The one downside though is that this is a brushed tool, so keep that in mind.


Now as weather or not you can get this into tight spaces, well… we were surprised how well this actually performed. The head is low-profile and can actually get into very tight, awkward areas. The length was actually helpful when trying to get into those tight areas, and made it much easier to reach than your standard socket wrench would. It also has a bright built in LED light that will keep those areas illuminated.  

So which sockets do you get with this ratchet?

Eight 1/4 in. drive 6-point sockets: SAE: 1/4 in., 9/32 in., 5/16 in., 11/32 in. MM: 8 mm, 9 mm, 10 mm, 11 mm, fourteen 3/8 in. drive 6 point sockets: SAE: 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., MM: 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, ten 3/8 in. drive 6-point deep sockets: SAE: 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., MM: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, one 3/8 in. drive 3 in. extension bar, one 3/8 in. F x 1/4 in. M drive adapter

At the end of the day, we felt that though the new Husky 12V ratchet was not perfect, it would defiantly make the job not only easier, but faster than when using a manual ratchet. The built quality is great, and the power is enough to make just about any job a breeze. We did wish it was brushless, and at least had a belt clip, but other than those small items, it’s a solid, well rounded tool.  

I acknowledge that The Home Depot is

partnering with me to participate in

the ProSpective 2018 Campaign. As a part of

the Program, I am receiving compensation in

the form of products and services, for the

purpose of promoting The Home Depot. All

expressed opinions and experiences are my

own words. My post complies with the Word Of

Mouth Marketing Association (WOMMA) Ethics

Code and applicable Federal Trade Commission



Husky cordless ratchet


I know what you're just saying its so easy for a majority informed members here on TGJ to shoot down a product that obviously may not meet one's own personal or performance criteria but its a big capitalist world out there. :D

As my boss is fond of saying there's a fool for every stool (and someone willing to take their money :lol:)

Lets face it there actually are people that BUY a HF DrillMaster drill and think its great just read the reviews :lol_hitti

Have to think though because of the quick price drop since the original promotion, its either a one time buy, possibly with no restock scheduled hence clearance of the remaining inventory, or maybe the simply are not selling :headscrat, but I really don't think that is the latter.

Though battery technology is much better all the time IMO integral batteries kinda suck and that's pretty much why I am a BIG proponent of removable rechargeable batteries for cordless power tools and other companion accessories

I once had a Makita drill that like cost almost as much to R&R the battery back then at warranty service center as it did to purchase the original unit. Tech even said so, was surprised anyone wanted to service it go figure. :wtf:and suggested buying new. Still remember that to this day.

Also had a SKIL brand inline screwdriver many, many, moons ago cool little tool at the time but again useless once the battery went south. :spit:

I'm actually really curious if anything on the Von Haus sold thru Amazon interchanges with the Milwaukee...

They look soo similar! ;)


  1. Aristocrat of bands
  2. Cracked hulu accounts 2020
  3. P pump 24v
  4. Canik tp9sfx upgrades

Husky 12v cordless ratchet - Fail?

AndeiH said:

care to elaborate on why you think its a fail? i liked the first one i got so much i went back and bought another one the next day :bounce:.

Click to expand...

I think you made my point for me.

Plus I’m honestly not a fan of those items that use very unique charger plugs.. i cant remember how many the dog has chewed up on me around the house over the years, buts its never really a big deal cause i can just grab another thats already in the house, or hop on eBay and find a new one in 2 minutes or less.. for whatever the reason the flimsy cord may become damaged - its an issue - and that is a very likely probability. Even my Neiko and Hf light uses a standard barrel plug.

Like i said before - under the husky brand I’d expect to see something a little less “throw away” if something stops working.. the cord, the internal battery..

You can find no name cordless ratchets on amazon for like $69 with a real charger base and removable batteries. I just would have expect something similar from Husky. Thats all... the internal battery thing is something you find today on low end brands, and items from 20 years ago.

For the guy that just wants a toy around the house I’m sure it fine.



Price Drop: Husky 12V Cordless Ratchet Set

Husky Cordless Ratchet Set

Over at Home Depot, this new Husky 12V 3/8″ cordless ratchet set dropped in price to $49. It debuted last month at $99, and my guess is that they’re trying to clear them out of stores before the end of the year.

The ratchet features a built-in Li-ion battery, and comes with an AC charger.

It operates at up to 230 RPM, and can drive “240 fastener cycles per charge.” It’s rated to 30 ft-lbs of torque, and can be used in “manual” mode for up to 150 ft-lbs of torque.

(To put things in context, Milwaukee’s M12 2457 3/8″ ratchet operates at up to 250 RPM and 35 ft-lbs max torque.)

The Husky kit comes with a selection of inch and metric 6pt sockets, and it all stores in the included blow-molded case.

Charging time is 90 minutes. There’s a battery fuel gauge on the handle, and also an LED worklight.

Buy Now(via Home Depot)

This tool has been on the market for less than a month. As such, there’s not much feedback yet. At $49 for the kit, it doesn’t seem like a a big risk.

P.S. If you bought one at $99, be sure to ask Home Depot for a price adjustment.

Sections: Cordless, Mechanics' Tools, Sockets & Drive Tools, Tool DealsMore from: Husky


Review ratchet husky cordless

The most torque you will find from a cordless impact ratchet is the Milwaukee fuel line with 60 ft-lbs of advertised torque. They offer a 1/4″, 3/8″, and a 1/2″ Fuel Ratchet that has more torque than Harbor Freight, Snap-On, or Husky in the same drive size. The Milwaukee 1/2″ can do around 60 ft-lbs of torque, the Harbor freight claims to do 60 ft-lbs (it can’t), and the Snap-On does only 35 ft-lbs. Now that we have that out of the way, I am going to go through the important qualities to look at when choosing a cordless ratchet. In this article, we will analyze the versatility of the tool, warranty, battery life, RPMs, and price. You will find out what cordless impact ratchet is the best bang for your money, hands down. 

Let me preface this to say this is based on my experience having used many different impacts ratchets and having done a lot of research on the subject. I am sure there are people that will disagree with my conclusions.

Even the test used to determine torque values can be flawed or cheated by the different manufacturers. They can figure out the optimal settings to test their torque ratchet and get the highest numbers possible, but in real-life use, you will never recreate their torque values. An advertised 60 ft-lbs of torque on a cordless ratchet may actually be more like 30 ft-lbs real worlds.

Torque Ratings = Marketing Gimmicks:

Most people constantly talk about torque ratings with cordless tools. How many ft-lbs of breakaway torque does the Milwaukee fuel ratchet have vs. the non-fuel version?

Does the Snap-On have more breakaway torque than the Milwaukee ratchet, or is the Harbor Freight actually the strongest?

I am going to tell you a little secret when it comes to the torque ratings on cordless battery powered ratchets. Torque ratings on impact ratchets are one of the last things you should consider as a buyer. This only applies to impact ratchets, it is a totally different story when we are talking about Milwaukee vs. Dewalt 1/2″ impact wrenches torque values. That is a tool made for breaking really tight things loose, an impact wrench, however, is made to help you remove fasteners in tight spaces fast and easy.

Confused on the difference between an impact wrench and an impact ratchet?

to show the difference between an impact wrench and an impact ratchet

Why are these torque ratings pointless?

Because cordless impact ratchets are not made for high torque applications. They are time-saving devices that fit in tight spaces and allow you to back off a long bolt quickly and easily. You can use them just like a normal ratchet and break the fastener loose first by hand then use the electric feature to back it all the way out.

I have used the Snap-On version, the Milwaukee version, Husky cordless ratchet, and the Harbor Freight ratchet.

What are the first things that come to mind when I pick them up and use them?

Their weight, length, RPM’s for removal, price, warranty, and battery life. What isn’t a deciding factor when thinking about which one is my favorite? Whether or not the advertised torque values are accurate or not, and whether or not they will remove a 60 ft-lb fastener (spoiler– they don’t).

Harbor Freight is Blowing Smoke:

Yes, and I don’t like it as much as you probably don’t like being cheated. That is the issue with marketing in 2019, there are so much fluff and junk on the boxes. The Harbor Freight Earthquake EQ38RXT-12V 3/8″ cordless ratchet wrench says it can do 60 ft-lbs in huge letters on the box. They also call it the “Xtreme” torque model.

show harbor freight earthquake xt couponNews flash it can’t do 60 ft-lbs of torque. If it could, it would be heavier, bulkier, and a totally different tool. That would make it a horrible impact ratchet. If they made it big enough to actually break loose a fastener at 60 ft-lbs it would have to be much larger and thereby would make it a useless tool.

We are already seeing that trend happen in cordless ratchets and the backlash from customers that are expressing their concern. It seems manufacturers only care about hitting their marketing numbers and marketing towards uninformed buyers. So, as long as the ratchet that has the highest torque ratings is still selling the most– companies are going to try to have the highest torque numbers.

For real-world torque values, I would say the Harbor Freight 3/8″ ratchet probably does around 30-40ft-lbs routinely. That number changes depending on the fastener, type of socket, rust, etc.

Anything in the 20-40 ft-lb range for a torque ratchet is totally sufficient. The beauty of these tools is that you can use them as a normal ratchet and break the fastener loose before engaging the electric motor to back it out quickly.

What I do notice compared to the Snap-On or the Milwaukee ratchet is that the harbor freight is SLOWER (RPM wise). Meaning it takes longer to back off the fastener. That is much more important than whether or not you have to put in a tiny bit of elbow grease to break the fastener loose first.

Torque #’s Sucks RPM’s Matter

So, what are the important features to look at when you are buying a cordless impact ratchet?

  • Price (Harbor Freight Cheapest/Milwaukee best value)
  • Battery Platform Compatibility (Milwaukee wins by far)
  • Rotations Per Minute (1. Snap On 2. Milwaukee 3. Harbor Freight)
  • Warranty (Milwaukee 5 years clear winner)
  • Battery Life (All last a long time, Snap-On is fastest and therefore dies the soonest during full use)
  • Light or No Light (Milwaukee has light, Snap-On does, Habor Freight no).
  • Battery Charge Indicator or Not (Milwaukee/Snap-On have charge indicator, Harbor Freight does not)
  • Versatility (Snap-On long neck cordless is clear winner, Milwaukee Non-Fuel also)
  • Breakaway Torque (1. Milwaukee Fuel 2. Snap-On 3. Harbor Freight– I think it is a POINTLESS number).

If all you care about in a cordless ratchet is breakaway torque then just go buy the Milwaukee Fuel 3/8″ or 1/2″ Milwaukee Fuel Ratchet here. They are great tools with an awesome warranty and beat the Snap-On and the Harbor Freight in actual breakaway torque values.

The only drawback to the Milwaukee Fuel impact ratchets is that they are bulkier than the non-fuel impact ratchets. For me, one of the most important things is that my impact ratchets can fit in tight spaces easily. I do NOT want a bulky head on my impact ratchet.  

However, I would say the actual better cordless ratchet isn’t the Milwaukee Fuel versions (they are larger and bulkier) but the Non-Fuel Milwaukee cordless ratchets.

Blasphemy. How could I? Milwaukee Fuel isn’t better than the non-fuel?What am I paying for then?

Sorry if this offends you. I understand if you are paying more for a tool you should expect it is a better tool. Milwaukee fuel is the professional line of tools and they cost more than the non-fuel versions. Shouldn’t this mean they are always better?

Milwaukee Fuel ratchets are very nice– but, can be quite bulky for certain uses. If you don’t have the budget to own both the Fuel and the non-fuel versions of their ratchets– then I highly recommend just sticking with the non-fuel (cheaper) Milwaukee cordless ratchets.

They are smaller, fit in tighter spots, and you can still break bolts loose first with the manual ratchet function (you just use it as a normal socket wrench).

For me, that is the entire point of the cordless ratchets in the first place. To make removal of bolts much less tedious and cause you much less strain and stress than if you did it by hand. I almost NEVER put a cordless ratchet on a fastener and hit the trigger right away without breaking it loose by hand first.Ok, not with an 8mm or 10mm fastener, but any of these cordless ratchets will remove those fasteners.

Let’s take a look at some of the statistics that I think actually matter when choosing what cordless ratchet to buy.

Who Makes The Best Cordless Impact Ratchet:

different sizes of the different impact cordless ratchets milwaukee snap on and harbor freight

TL: DR the Milwaukee non-fuel ratchets are the best bang for your buck when you include all the important features. The warranty on Milwaukee’s ratchets is miles ahead of any other brand (5 years on the tool). You also aren’t paying an arm and a leg like the Snap-On 14.4v ratchets, and are getting a step up in quality from the Harbor Freight version. For those of you that want to see all the little details and numbers for each of the brands keep reading.

(Specifications for the 2557-20 M12 FUEL 3/8 in ratchet)

1. Roughly around $170 for the tool only in 2019.

2. Advertised as 55 ft-lbs of torque.

3. 5-year warranty (easy process)

4. Lots of battery options

5. LED light in the tool

6. Battery Indicator

6. Brushless motor

7. 200 RPM 

8. Available at many different home improvement stores, online, used etc.

9. Warranty is based on Serial Number and age. No receipt needed (you can buy used and still warranty it online)

For the 3/8″ drive Non-Fuel Milwaukee Ratchet (Brushed Motor) Model #: 2457-21

(Price roughly $170 for an entire kit– tool, charger, and battery)

1. 35 ft. lbs. of torque

2. 250 RPM

3. 5 Year Warranty

4. Brushed Motor

5. LED Light– one of those features you don’t realize is actually super useful and nice to have

6. Battery Indicator (another feature that will save you a headache from a tool dying mid-job)

7. More versatile and smaller than the Fuel 3/8″ version.

8. Faster 250 RPM than the Fuel version’s 200 RPMs (50 rpm’s more) meaning it removes fasteners 20% faster than the fuel version.

9. MY FAVORITE of them all. Shop for them on Amazon here.

You can pick up the tool only for like $65 brand new.

Specifications for the CTR761CDB 3.8″ 14.4v ratchet.

1. Price is the highest at around $250/460 for a tool-only or a “kit (battery and charger included)”

2. 35 ft-lbs of torque

3. 2nd worst warranty with a 1-year tool warranty.

4. FASTEST RPM350 free spinning RPM’s

5. 1-year warranty on the battery

6. Good tool, but not worth the money.

7. They do make a long neck version of the same ratchet that is an absolutely killer design (check it out here) 

Price is roughly $100 with coupon or $130 without.

1. Only a 90-day warranty

2. Comes with a battery and charger

3. Works perfectly well, but is misleading in its torque marketing(it cannot do 60 ft-lbs in real-world automotive use)

4. Is pretty long and heavy (can be a good thing and a bad thing)

5. Advertised 60-ft-lbs of torque.


7. No LED

8. No Battery Indicator on Tool

9. Not a lot of tools that use the same battery platform

10. Brushed Motor

11. Sparks a lot when using– do not use around fuel vapors.

Overall a decent budget buy, but you really should just be buying the Milwaukee non-fuel you will be much happier!

Probably the best buy if buying just on a strict budget (tie with harbor freight).

$80 for the tool which has a built-in battery

1. 2-year warranty

2. 35-ft lbs of torque (probably real world a bit less)

3. 230 RPM’s

4. Works great but has no ability to swap out batteries when it dies it dies (battery is built in).

Click here to check out the reviews on Amazon. You can get a better price at Home Depot

Winner: Milwaukee Cordless Ratchets

You don’t have to be a genius to see the Milwaukee clearly offers the best value when you include the warranty. Snap-On is crazy expensive and only has a one year warranty. Plus many professional technicians complain about long wait times to get their cordless tools back from Snap-On. Also, you may associate Snap-On with made in the USA, but you would be wrong with their cordless tools they are imported just like Milwaukee’s and everyone else’s.

Snap on Long Neck ratchet

The only reason to be buying the Snap-On cordless ratchets is to buy the long-neck version that will literally become your favorite tool if you own it. Otherwise, stick with the Milwaukee m12 ratchet lineup (80+ tools on the same battery) and you will be more than happy.

If strictly purchasing on the tightest budget and you want the best cordless ratchet for the least amount of money– get the Husky 3/8″ at Home Depot or the Harbor Freight ratchet and make sure to search for a coupon first. Both work perfectly well but aren’t professional grade to stand-up to the Milwaukee or the Snap-On.



Husky cordless ratchet testing

Everyone squeaked with delight. They began to settle down. The girls were busy in the house, laying out things. Dimka and I stood in the street, smoked, and looked around our new farm.

You will also like:

Him become what he is now. This Russian soldier is still quite a boy. Skynet needed him and he got it and became attached to him with maternal love, already like a real earthly woman. He began to feel like a woman and like a mother.

9477 9478 9479 9480 9481