Yamaha bluetooth receiver pairing

Yamaha bluetooth receiver pairing DEFAULT

[R-S202] How do I pair my Bluetooth device (smartphone or tablet) with my R-S202?

Last Update: 10/8/2020

R-S202 Bluetooth Pairing/Setup:

There are two easy ways to pair your smartphone or tablet with the R-S202, using the remote control or using the front panel buttons. Choose the one method that best suits your needs.

Using the remote control

  1. Press the BLUETOOTH source button on the remote for more than 3 seconds to enter pairing mode.
    GAA19952_pic01
    * Pairing mode lasts for 5 minutes.
    * In pairing mode, the front panel display of this unit will indicate “PAIRING,” and the Bluetooth indicator will blink.
  2. Turn on the Bluetooth function on your smartphone or tablet to pair with the receiver.
  3. From the Bluetooth connection list on your device, select Yamaha.
    * If a passkey, passcode, PIN , or similar code is required, enter the number "0000".
    * When pairing has been completed, the front panel display of this unit will indicate "COMPLETED".
    * After your device is connected, the front panel display of this unit will indicate "CONNECTED" and the Bluetooth indicator will light up.
    GAA19952_pic02
    Your smartphone or tablet is now connected.
  4. Play music on your smartphone or tablet (Bluetooth device) and check the sound from the speakers connected to the receiver.

Using the front panel

  1. Press and hold down either the INPUT Left or Right arrow button for 3 seconds.
    GAA19952_pic03* Pairing mode lasts for 5 minutes.
    * In pairing mode, the front panel display of this unit will indicate “PAIRING,” and the Bluetooth indicator will blink.
  2. Turn on the Bluetooth function on your smartphone or tablet to pair with the receiver.
  3. From the Bluetooth connection list on your device, select the Yamaha.
    * If a passkey, passcode, PIN, or similar code is required, enter the number "0000".
    * When pairing has been completed, the front panel display of this unit will indicate "COMPLETED".
    * After your device is connected, the front panel display of this unit will indicate "CONNECTED" and the Bluetooth indicator will light up.
    GAA19952_pic04
    Your smartphone or tablet is now connected.

Note: Bluetooth is enabled by default. If these options do not work, start over from step 1 and/or see the FAQ for instructions on turning on Bluetooth on the R-S202.

How do I turn on the Bluetooth function on the R-S202? (R-S202 Enabling Bluetooth Function)

Keywords for this question

Yamaha, Hi-Fi Components, Natural Sound Stereo Receiver, R-S202, R-S202D, Bluetooth Setup, Pairing

Do you need an additional help? Contact Information

Sours: https://usa.yamaha.com/support/faq/audio_visual/gaa19952.html

How to Pair Bluetooth Devices to Yamaha YHT-4930UBL

Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.

Introduction

This guide will walk you through pairing a device to your Yamaha YHT-4930UBL receiver.
YHT-4930UBL AV receiver.

This guide will walk you though the following:

  • Educate you about Bluetooth range
  • Place your receiver in pairing mode
  • Connect your Phone/Tablet or PC/Mac device to your home theater
  • Check audio sources on PC/Mac devices to ensure correct audio device is selected

1 Range Check

The device needs to be within a reasonable range in order to connect.

  • In general, to pair and use a Bluetooth device (like a speaker, headset or smartwatch), the device needs to be within 10 feet of your computer or other device.
  • Some medium and higher-power devices can be farther, up to about 30 feet, but this tends to be for larger devices that plug in or have very large batteries, such as another computer, media streaming device, or a plug-in speaker system.
    Diagram of Recommended Bluetooth Distance

Try moving the Bluetooth device closer if you have trouble.

2 Pairing Mode

  1. Press the Bluetooth button on the remote.
    Remote Control Inputs with Bluetooth highlighted.
  2. Hold the Memory button down on either the Remote Control or Front Panel for 3 seconds until Searching is displayed on the front panel.

? What device are you trying to pair with your speakers?

  1. Android
  2. iOS
  3. Windows
  4. macOS
Sours: https://www.techsolutions.support.com
  1. Ebay motorcycle handlebars
  2. Sonic the hedgehog gummies
  3. Craigslist eastern shore trailers

[RX-V385] How to pair with mobile (Bluetooth) device

Last Update: 8/28/2020

RX-V385 Bluetooth Pairing

1. Press the BLUETOOTH button on the remote.
GAA19663_Pic01

2. Press and hold the MEMORY button on the remote for 3 seconds.
"Searching..." appears on the front display.
GAA19663_Pic02

3. Access the Bluetooth function on the mobile device (phone, tablet, etc.)

4. Select the Yamaha receiver.
* If a passkey, passcode, PIN number, or similar code is required, enter the number "0000".

5. Play music on the mobile device (Bluetooth device) and check that sound is output from the speakers connected to the Yamaha AV Receiver. If there is no sound, please see the TROUBLESHOOTING section of the Online Manual from the below link.
URL: https://manual.yamaha.com/av/18/rxv385/
Section: TROUBLESHOOTING > When any problem appears > Bluetooth trouble

Keywords for this question

Yamaha, RX-V385 Bluetooth Setup Pairing, RX-V385, AV receivers, RX-series, AV amplifier

Do you need an additional help? Contact Information

Sours: https://usa.yamaha.com/support/faq/audio_visual/gaa19663.html

Enjoying audio using Bluetooth® speakers/

headphones

You can enjoy audio played back on the unit using Bluetooth speakers/headphones.

The unit

Bluetooth speakers/headphones

Note

▪ Sounds will be also output from the speakers connected to the unit.

▪ You cannot play back music files stored on a Bluetooth device (such as smartphones).

1

Use the input selection keys on the remote control to select an

input source.

Select an input source other than Bluetooth.

2

Press SETUP.

3

Use the cursor keys to select "Bluetooth" and press ENTER.

4

Use the cursor keys to select "Transmitter" and then set to "On".

5

Use the cursor keys to select "Device Search" and press ENTER

to search the Bluetooth devices.

The list of Bluetooth devices is displayed.

6

Use the cursor keys to select the Bluetooth speakers/headphones

to be connected with the unit and press ENTER.

When the connection process finishes, "Completed" appears and audio

played back on the unit will be reproduced from the Bluetooth speakers/

headphones.

Note

If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing

mode and then perform "Device Search" operation again.

7

Press ENTER.

This completes the settings.

Note

To terminate the Bluetooth connection, perform one of the following operations.

▪ Perform the disconnect operation on the Bluetooth speakers/headphones.

▪ Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".

48

En

Sours: https://www.manualslib.com/manual/1418281/Yamaha-Rx-V385.html?page=48

Receiver yamaha pairing bluetooth

Playing back music stored on a Bluetooth® device

You can play back music files stored on a Bluetooth device on the unit.

Please also refer to the owner's manual of your Bluetooth device.

Note

▪ The Bluetooth device must support A2DP.

▪ You cannot play back video files stored on a Bluetooth device on the unit.

Connecting a Bluetooth® device (pairing)

When connecting a Bluetooth device to the unit for the first time, the pairing operation

is required to perform. Pairing is an operation that registers the Bluetooth devices with

each other beforehand. Once pairing has been completed, subsequent reconnection

will be easy even after the Bluetooth connection is disconnected.

1

Press BLUETOOTH to select "Bluetooth" as the input source.

2

Hold down MEMORY on the front panel or the remote control for

more than 3 seconds.

"Searching..." appears on the front display.

Note

▪ You can also use the "Option" menu to pair a Bluetooth device. Press OPTION, and then use the

cursor keys to select "Pairing".

▪ If another Bluetooth device is already connected, disconnect the Bluetooth connection before

you perform a pairing operation.

▪ To cancel pairing, press MEMORY.

3

Turn on the Bluetooth function on your device.

4

From the Bluetooth device list on your device, select "*******

Yamaha" (*******: model name of the unit).

After pairing has been completed and the unit is connected to the

Bluetooth device, "Connected" appears on the front display. While a

Bluetooth connection is established, the Bluetooth indicators light up.

CHARGE

ENHANCER STEREO TUNED

OUT

OUT

ECO

Connected

Note

▪ If you are prompted to input a passkey during a pairing procedure, input the numerals "0000".

▪ Complete a pairing procedure within 30 seconds.

▪ If no Bluetooth devices are found, "Not found" appears.

42

En

SLEEP

MUTE

VOL.

VOL.

ADAPTIVE DRC

VIRTUAL

L C R

SL

SW

SR

Sours: https://www.manualslib.com/manual/1085071/Yamaha-Rx-V381.html?page=42
How to update a Yamaha Receiver with network.

Using bluetooth™ components, Playback of the bluetooth™ component, Pairing the bluetooth™ receiver and your bluetooth – Yamaha RX-V365 User Manual

background image

30

En

You can connect a Bluetooth Wireless Audio Receiver (such as YBA-10, sold separately) to the DOCK terminal of this
unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring
between this unit and the Bluetooth component. You need to perform “pairing” for the connected Bluetooth receiver and
your Bluetooth component in advance.

Pairing must be performed when you use a Bluetooth
component with the Bluetooth receiver connected to this
unit for the first time or if the pairing data has been
deleted. “Pairing” refers to the operation of registering a
Bluetooth component for Bluetooth communications.

y

• You need to perform the pairing operation only when you use the

Bluetooth component with the Bluetooth receiver for the first time.

• You need to perform the pairing operations both on this unit and on the

Bluetooth component. If necessary, refer to operating instructions of the
Bluetooth component.

There are two pairing methods: pairing by using “START
PAIRING” in “SET MENU” and quick pairing.

Pairing by using “SET MENU”
Use this feature to perform pairing of this unit and the
video monitor. Select “START PAIRING” in “INPUT
MENU.” See page 36 for details.

Quick pairing

1

Press hAMP and then press NINPUT l /
h repeatedly (or press fV-AUX/DOCK) to
select “V-AUX” as the input source.

2

Turn on the Bluetooth component you want
to pair with.

3

Press and hold GBAND (or jBAND LEVEL
TITLE) for 3 seconds.
Once the Bluetooth receiver starts pairing,
“Searching...” appears for a moment. While the
Bluetooth receiver is in the pairing mode, DOCK
indicator flashes on the front panel display.

y

• To cancel the pairing, press GBAND (or jBAND LEVEL

TITLE) again.

Note

• If the Bluetooth receiver is not connected to the DOCK terminal of

this unit, “No BT adapter” appears on the front panel display.

4

Check that the Bluetooth component detects
the Bluetooth receiver.
If the Bluetooth component detects the Bluetooth
receiver, “YBA-10 YAMAHA” (example) appears in
the Bluetooth device list.

5

Select the Bluetooth receiver in the
Bluetooth device list and then enter the pass
key “0000” to the Bluetooth component.
When the pairing is completed successfully,
“Completed” appears on the front panel display.

Note

• The Bluetooth Wireless Audio Receiver can be paired with up to eight

other components. When pairing is conducted successfully with a ninth
component and the pairing data is registered, the pairing data for the least
recently used other component is cleared.

1

Press hAMP and then press NINPUT l /
h repeatedly (or press fV-AUX/DOCK) to
select “V-AUX” as the input source.

2

Start playback of your Bluetooth component.
When the connected Bluetooth receiver detects the
Bluetooth component, “BT connected” and the
DOCK indicator appears on the front panel display.

y

• When you press lENTER on the remote control, the connected

Bluetooth receiver searches and connect to the last connected Bluetooth
component. If the Bluetooth receiver cannot find the Bluetooth
component, “Not found” appears on the front panel display.

• To disconnect the Bluetooth receiver from the Bluetooth component,

press nRETURN.

Using Bluetooth™ components

Pairing the Bluetooth™ receiver and
your Bluetooth™ component

To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.

Playback of the Bluetooth™
component

Sours: https://www.manualsdir.com/manuals/226351/yamaha-rx-v365.html?page=34

You will also like:

Tags

How can I stream music from a MusicCast device to my Bluetooth headphones or speakers?

Having recently purchased a pair of Sennheiser Momentum 2.0’s to keep the neighbours happy i thought it worthwhile documenting my experience trying to pair them with my Yamaha RN402D stereo amp. This should of been easy, but i tell you it wasn’t, and the user manual for the Yamaha basically sends you on a wild goose chase. Pairing the M2’s with my android phone was simple enough, enter pairing mode on the M2’s by holding down the power button for a couple of seconds until you hear ‘Pairing Mode Activated’ through the cans, then enable bluetooth on your phone and search for the Momentum Headphones, then connect. Easy.

The problem with the  Yamaha is there is no obvious way of doing this. The manual tells you to enter pairing mode by holding the connect button on the remote of the amp. This doesn’t work for Bluetooth pairing, it’s designed for Yamaha MusicCast devices only. If you want to connect third party bluetooth cans you need to use the MusicCast app on your phone. While the manual does tell you this, it doesn’t then tell you how to pair a new device. I incorrectly assumed i could use the ‘Add device’ wizard, again this is only designed for other MusicCast devices.

Instead, the correct procedure, is to click the ‘Sound Setting icon’ on the ‘Now Playing’ screen, then select ‘Bluetooth Transmission’. Once on this screen, enter pairing mode on your bluetooth headset and then search for new devices. Your headphones should then appear for selection and pairing. Now why would you hide it there, Yamaha.

 

Like this:

LikeLoading...

Related

Sours: https://petestechblog.com/2018/01/29/how-to-connect-a-bluetooth-headset-to-yamaha-musiccast-system/


2205 2206 2207 2208 2209