Attic ladder springs replacements

Attic ladder springs replacements DEFAULT

How to Install and Replace Attic Door Springs

Attic door springs help secure the ladder in the attic and prevent it from swinging too far out when it has been opened. The springs keep the ladder firmly connected to the attic door.

Springs for the ladder can usually be bought from local home-improvement stores or hardware suppliers, but there are also plenty of places on the Internet that can supply attic door springs. Installing them or replacing them is not terribly difficult if you follow these handy tips and take care.

Step 1—Remove the Old Hinge

Whether you have previously fitted an attic door spring or not, remove the hinge that is currently connected to your attic door. This is found at the far end of the attic door, connecting it to the floor above. Hold the door in your left hand and unscrew the hinge with your right. Keep your hinge, as you will need to re-install it at the end of the project. Move the door out, and leave it to one side.

Step 2—Remove the Old Spring

Once the door has been removed, insert your stairs. If you are replacing the attic stairs, unscrew the springs. Do this by removing the screws from the ladder side first and then folding the spring back so that it is level and not about to snap down. Then, unscrew the spring on the attic floor joist. Clean around the area where the new spring will be fitted and then bring up the new spring.

Step 3—Add the New Spring

The spring needs to be attached to the attic floor first, so pull the latter fully down and lay the spring along the line of the steps. Measure where the spring will need to be fixed to the opening. The spring should be fully extended and reach down such that you can fold and unfold the ladder.

Next, mark on the attic door opening where the spring should go. It will usually attach to a piece of the floor just above the opening. Mark on the ladder where the other end should be fixed.

Step 4—Add the Spring

Make sure you are fitting the spring the right way around (it should extend outwards over the top, as a book does, being opened, rather than from beneath the body of the spring). Take your screws and screw them tightly into the attic flooring where you made your marks.

Fold up the ladder and screw on the spring at the place where you have marked on the ladder itself. Repeat this procedure for the other side of the ladder. Test your ladder to make sure that it unfolds in the correct manner.

Step 5—Add the Hinge

With the ladder in place, reinstall the door using the hinges you removed earlier. Once the door has been put into place, fix the ladder to the door on the side facing into the attic. This will allow you to reach the ladder without having to stretch or use a pole to get it to descend.


Werner 56-1 Attic Ladder Spring Replacement Kit only for W2200, W2500, WH2200, WH2500 Werner Access Ladders

Werner 56-1 Attic Ladder Spring Replacement Kit only for W2200, W2500, WH2200, WH2500 Werner Access Ladders


200 ratings Write a review

Item #:


This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Note: Electronic products sold in US store operate on (110-120) volts, a step-down power converter is required for the smooth device function. It is mandatory to know the wattage of the device in order to choose the appropriate power converter. Recommended power converters Buy Now.

Customer Ratings

0 customers ratings

  • 5 Star 0%
  • 4 Star 0%
  • 3 Star 0%
  • 2 Star 0%
  • 1 Star 0%

Review this product

Share your thoughts with other customers

Customer Reviews

  • No customer reviews found

Write Your Own Reviews

Only registered users can write reviews. Please log in or register

  1. Homeless shelter vallejo
  2. Prius owners manual 2011
  3. Synonyms for ambassador
  4. Chair covers rental chicago

(2pk) Werner 56-1 - Attic Ladder Spring Replacement Kit - Fits

$38.00Buy It Now18d 22h, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller:birdladder✉️(7,163)100%, Location:Milwaukee, Wisconsin, Ships to: US, Item:310679971309(2pk) Werner 56-1 - Attic Ladder Spring Replacement Kit - Fits . Werner 56-1 Replacement Attic Ladder Spring Kit Includes: (2) - Springs Fits: These Werner Series Attic Ladders Models Mk 1 thru Mk 3 W2208 WH2208 W2210 WH2210 W2508 WH2508 W2510 WH2510 Overall Dimensions: 9-1/8" REPLACEMENT PARTS ARE NON-RETURNABLE Authorized Distributor of Werner Ladders & Parts Bird Ladder & Equipment Co.Condition:New, Restocking Fee:No, Return shipping will be paid by:Buyer, All returns accepted:Returns Accepted, Item must be returned within:30 Days, Refund will be given as:Money Back, Non-Domestic Product:No, Modified Item:No, Custom Bundle:No, MPN:56-1, Brand:Werner

PicClick Insights - (2pk) Werner 56-1 - Attic Ladder Spring Replacement Kit - Fits PicClick Exclusive

  •  Popularity - 34,709 views, 11.4 views per day, 3,057 days on eBay. Super high amount of views. 566 sold, 351 available.
  • 34,709 views, 11.4 views per day, 3,057 days on eBay. Super high amount of views. 566 sold, 351 available.

  •  Price -
  •  Seller - 7,163+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
  • 7,163+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    Recent Feedback

People Also Loved PicClick Exclusive


How do you replace the springs on pull down attic stairs?

Replacing the springs is easier with the help of an assistant.
  1. Pull down the stairs and switch on the attic light.
  2. Replace the springs one at a time.
  3. Rotate the turnbuckle counterclockwise by hand to relax the tension on each spring.
  4. Connect the end of a new springs at the studs.

Click to see full answer.

Moreover, how do I adjust the springs on my attic stairs?

Adjusting the springs on attic stairs is easier with the help of an assistant.

  1. Pull down the stairs.
  2. Locate the adjustment nuts on the threaded stems of the J-hooks that connect the inner end of each spring to the corresponding power arms.

One may also ask, how do you measure for an attic ladder replacement? Place a tape measure at the left side of the attic opening, on the inside edge of any trim molding, but the outside of the actual attic ladder frame. Stretch the tape measure over to the right side of the attic ladder door, stopping at the inside edge of the trim molding on that side.

In this manner, how much does it cost to install attic pull down stairs?

Cost to Install Attic Ladder or StairsThe average cost of installing attic ladders or stairs ranges from $220 to $647, with an average rate of $445 including parts and labor. Labor charges for a professional contractor average $240 per project, with an hourly rate of $60.

How do I secure my attic door?

Place a straight bar hasp flat against the door. Make sure the locking eye is located on the frame or ceiling just to the right of the door. The majority of the hasp should lay flat across the attic door. A straight bar hasp is the best choice for an attic door because it provides strength and stability for locking.


Replacements springs attic ladder

There was no such thing as an extract from the mother. The father of all spoke (and still speak) as an honest man, but a freak. But from these rumors, neither mother nor me was any easier. If even they had spoken about the father differently, and we would have had the means, then everyone would have respected us more and we would not. Have had to humiliate ourselves in front of people.

Attic ladder repair retrofitting a new hinge on older ladder

I am going to you. The one that just roared after him from behind and lagged behind hopelessly and irrevocably. This was the one who lived in him for many years in Andrei Surganov and tortured him, generating evil within his living. Carrier. This is what lived in his consciousness and what was now perishing, losing the human soul that had escaped from his clawed, tenacious paws.

You will also be interested:

But doubts quickly passed when, hearing the sound of the basin on the ladle, Igor involuntarily looked into the window of the bathhouse. Slightly bending over, naked Lera was soaping her trademark trousers and rinsing them in a basin, adding inputs. And who, then, is there, the scribe, is it really Alena, no, it can't be just some stray woman, Igor thought.

Moving his gaze from the window to the indulgent couple, he saw in the light of the lamp, white with red polka dots, in the light of. The lamp.

18877 18878 18879 18880 18881