3 point hitch bracket

3 point hitch bracket DEFAULT

Adapter Bracket

Product Overview

A top hitch adapter bracket allows for 3-point attachments to fit on a standard quick hitch. Offering two different heights, this quick hitch adapter can be used with a variety of tractor attachments such as snow plows, mowers, or boom poles, so long as the tow bar is less than 2-3/4 inches wide. Providing easy hookups, this adapter is made for Category 1, 3-point tractors. This top hitch adapter bracket has 3/4 inch mounting holes. A convenient quick hitch to use on your farm equipment.


  • Category 1, quick hitch adapter bracket
  • 3/4" Diameter pin holes
  • For use with 65052 3-Point quick hitch, category 1
  • For category 1, 3-point hitch tractors
  • Variable height adjustment
  • Overall height: 8-1/2"
  • The distance between brackets: 3-3/4"
  • The length of the top part where the mounting hole are: 2-1/2"
Check out our selection of Tractor Quick Hitches
Sours: https://www.agrisupply.com/adapter-bracket/p/80717/

Bellevue, IowaDoes anyone make a bracket to mount front weights on a 3 pt? I have lots of front weights in a pile and I need more weight on my 8330.

Slicker than a Yes album.http://www.summitfab.com/suitcaserack.html

collegeboy - 8/8/2011 22:38



Sunnyside, WABring a weight to a good welding shop and they should be able to make you one. One holds 40 weights and the other is a little over a yard of concrete. Have one more that holds 32 weights.


Attachments2011-05-25_19-14-21_824.jpg (33KB - 497 downloads)

Do they make a bigger/heavier duty model?

Adding 500 lbs to the back of a farm tractor ain't exactly a lot of weight.


It isn't that hard to take a weight bracket for the front of a tractor and start welding some metal together to put it on the 3pt.   I've got a Massey bracket that fits on a quick hitch that holds 1600 lbs of Massey suitcase weights.

Columbia Basin, Ephrata, WASo... you going to sell that concrete weight when you get a 4wd pack tractor? How is the tractor search going anyway?

Dallas Center IA 515-720-2463K & M, the Tractor Seat People who also have a line of Rock Boxes have a Rock Box on a 3-point carrier.
It would hold a bunch of front weights.

I have several of the smaller K & M rock boxes and have put a full rack of weights in one at a time. Lots of room left over.

Pretty sure this deal is the larger box.


Edited by Bobby Greif 8/9/2011 07:01


Attachments1801-1850%20ASY_TFL_01.jpg (23KB - 518 downloads)

Dallas Center IA 515-720-2463First - A given amout of weight hanging back on the 3-point will put more weight on the rear axle, than the same amout of weight bolted to the wheels.

Say you put 1000# on a 3-point carrier. The center of gaviaty of that carrier will be 3 - 4 feet or so behind the axle.
The increase in weight will be quite a bit more than 1000#.

But the weight has to come from someplace - The front axle will be carring less weight.

Find a Nebraska test. At the bottom is how the tractor is weighted.
Find one that the only weight added was front weight, you may have to look a while.

Without any added weight, the rear axle will weight so much.

Add weight only to the carrier on the front end, and the rear axle weight will be some less than before.
Even thou the total tractor weight is greater.
And the front axle weight will have increased more than the weight added.

The second thing - putting a weight deal on the 3-point can make it harder to hookup hydraulic hoses.
Probably close to 30 years ago I decided that unless I had the 6 bottom 20" plow hooked on my White 2-155 those front weights were doing more harm than good. So I took them off. And I was right.

Then I made a deal to bolt the front weights on the 3-point.
Worked great. You can really tell it is there. But the hoses are hard to get too.

I have wanted to make a seperate deal on the back to hook up the hoses. Never got it done.

Picure is a nice looking 4020 Powershift for sale at John Deere in Pender Nebraska.
Don't know the price, but if you are looking for a nice 4020 just to have - I would be making a call to NE Nebraska.


Attachments2011_07230648.jpg (66KB - 455 downloads)

Woodham, OntarioDairy farm nearby made some brackets to mount a concrete block on a STX385 without a hitch. Just needs to be lifted on with a payloader.

Sunnyside, WAGerard,

If you ever get a chance to take some pictures of that I would be interested.

Sunnyside, WAOnce I found out I would need a 9X20 series powershift and then priced blades (Degelman and Grouser) I got sticker shock.

That concrete block is pretty cheap to make. But could be expensive to buy!

I made this one several years ago using the weight bracket off our 706 and part of an old IH cultivator toolbar. 



I took a 3pt bale fork and modified it to hold suit case weights for our 2040 loader tractor.  Welded a piece of rectangler tubing to space it out from the bale fork and then welded a plate on the back of that, which we slide the weights on.  The bale fork acts as a stand for when its not on the tractor.  Hopefully the pictures show up.





AttachmentsDSC02158.jpg (34KB - 480 downloads)
AttachmentsDSC02201s.jpg (54KB - 486 downloads)
AttachmentsDSC02200s.jpg (52KB - 490 downloads)
AttachmentsDSC02198s.jpg (49KB - 506 downloads)

Woodham, Ontario

This the best I can do right now. It hangs on some hooks on the back and hooks into the drawbar.

Is a Grouser significantly more money than a Degelman?

Brazilton KS

Caution?   What, are they afraid someone will try to lift it and hurt their back?  lol

Needs one of these.

Attachmentstwo person lift.htm (12KB - 1104 downloads)

Sunnyside, WADepends what you want for a blade. A Degelman 7900 high lift 6 way is about the same money as a Grouser 6 way. 4 way to 6 way is not much money. If you want to go with a 7200 Degelman than it is quite a bit cheaper than the Grouser, but you are not comparing apples to apples.

Chilliwack BCWe made this one and use in on our Maxxum 125 for pushing silage. We guessed that it holds 3500 lbs when full.

Edited by plow79 8/9/2011 12:30

(maxxum weights.jpg)

Attachmentsmaxxum weights.jpg (85KB - 481 downloads)
Sours: https://talk.newagtalk.com/forums/thread-view.asp?tid=249537&DisplayType=flat
  1. Sugar skull baby shower
  2. Mason city hotels
  3. Ridgid reciprocating saw
  4. Flograppling free stream

Heavy Hitch - Category 1, 3 Point Hitch Receiver Drawbar With Suitcase Weight Bracket


The Category 1, 3 Point Hitch Receiver Drawbar with Suitcase Weight Bracket is made for sub compact tractors and compact utility tractors up to 45 horsepower. This 3 point hitch receiver has a 3” wide weight bracket that is centered on the hitch and works specifically with the 41 to 45 pound cast iron suitcase weights. It comes with 7/8″ lower pins and uses a 3/4″ top pin. It also allows up to eight suitcase weights to be attached in either direction, forward or back, depending on clearances. The standard hitch utilizes a 3″ x 3″ x 1/8″ wall square tube that the 2 inch receiver is fit into and the Super Duty version utilizes a 3″ x 3″ x 3/16″ wall square tube for extra rigidity and is recommended if you intend to use ground engaging attachments in the receiver. The Super Duty hitch also includes a 3/8″ chain hook welded to the top of the receiver.

Category 1 tractors are rated up to 45 horsepower. Not sure if your 3 point hitch receiver is category 0 or 1? Just measure the lower 3 point hitch holes. Category 0 will be 5/8″ diameter and 1 is 7/8″ diameter.

Compatible with:

  • All 3 point hitch receiver category 1 systems

  • Most 3 point quick hitch systems built to the ASE Standard S278.5

  • John Deere iMatch systems 

Comes standard with a super durable finish in a Black environmentally friendly powdercoat.

Sours: https://www.bigtoolrack.com/products/heavy-hitch-category-1-3-point-hitch-receiver-drawbar-with-suitcase-weight-bracket

As if sensing my displeasure, another appears next, similar to the previous one, but slightly different patterns on the outfit. And after her, more. Blimey.

Point hitch bracket 3

", the girl replied. Now I will help, do not worry!" its content in Alena's intestines. () Then he pulled out the tip, put the enema on the floor and, as about usually, he squeezed the hemispheres of his sister's priests together.Well, little sister, do you.

The Different Categories of 3 Point Hitches

It's you. You are in a new body, my son. And how is it for you. Better than the T-888. - Awesome feeling.

You will also be interested:

In fact, I did not drink in such situations because I tried to experience as much thrill as possible. And if you drink neither exciting shame, nor pleasant excitement. And in general, you can forget everything in the morning. No, for me it's better to drink like this AFTER sex.

1581 1582 1583 1584 1585