1982 chevy truck interior

1982 chevy truck interior DEFAULT

    • Interior
    • Weatherseals / Rubber
    • Windshield Wipers
    • Heater & A/C
    • Lamps, Lenses & Trim
    • Exterior Trim
    • Body Panels, Patches & Hardware
    • Bed Parts
    • Bumpers & Roll Pans
    • Glass & Conversions
    • Electrical
    • Suspension
    • Brakes
    • Steering Components
    • Drivetrain
    • Gas Tanks & Accessories
    • Radiators & Hardware
    • Books, Manuals & Videos
    • Gifts & Apparel
    • Extras / Miscellanous
    • Interior
    • Weatherseals / Rubber
    • Windshield Wipers
    • Heater & A/C
    • Lamps, Lenses & Trim
    • Exterior Trim
    • Body Panels, Patches & Hardware
    • Bed Parts
    • Bumpers & Roll Pans
    • Glass & Conversions
    • Electrical
    • Suspension
    • Brakes
    • Steering Components
    • Drivetrain
    • Gas Tanks & Accessories
    • Radiators & Hardware
    • Books, Manuals & Videos
    • Gifts & Apparel
    • Extra / Miscellaneous
    • Interior
    • Weatherseals / Rubber
    • Windshield Wipers
    • Heater & A/C
    • Lamps, Lenses & Trim
    • Exterior Trim
    • Body Panels, Patches & Hardware
    • Bed Parts
    • Bumpers & Roll Pans
    • Glass & Conversions
    • Electrical
    • Suspension
    • Brakes
    • Steering Components
    • Drivetrain
    • Gas Tanks & Accessories
    • Radiators & Hardware
    • Books & Manuals
    • Gifts & Apparrel
    • Extra / Miscellaneous
    • Interior
    • Weatherseals / Rubber
    • Windshield Wipers
    • Heater & A/C
    • Lamps, Lenses & Trim
    • Exterior Trim
    • Body Panels, Patches & Hardware
    • Bed Parts
    • Bumpers & Roll Pans
    • Glass & Conversions
    • Electrical
    • Suspension
    • Brakes
    • Steering Components
    • Drivetrain
    • Gas Tanks & Accessories
Sours: https://www.brotherstrucks.com/

Chevy-GMC Truck Interior Coat Hooks

Make / Model Chevrolet Blazer Custom Deluxe SeriesBodyNotesYear Make / Model Chevrolet Blazer Silverado SeriesBodyNotesYear Make / Model Chevrolet C10 Custom SeriesBodyNotesYear , , , , Make / Model Chevrolet C10 Scottsdale SeriesBodyNotesYear , , , , Make / Model Chevrolet C10 Silverado SeriesBodyNotesYear , , , , Make / Model Chevrolet C15 Cheyenne SeriesBodyNotesYear , Make / Model Chevrolet C15 Custom SeriesBodyNotesYear , Make / Model Chevrolet C15 Sport SeriesBodyNotesYear Make / Model Chevrolet K10 Custom SeriesBodyNotesYear , , , , Make / Model Chevrolet K10 Scottsdale SeriesBodyNotesYear , , , , Make / Model Chevrolet K10 Silverado SeriesBodyNotesYear , , , , Make / Model Chevrolet Suburban Base SeriesBodyNotesYear Make / Model GMC Jimmy Base SeriesBodyNotesYear , , , , , Make / Model GMC Jimmy High Sierra SeriesBodyNotesYear , , , Make / Model GMC Jimmy Sierra Classic SeriesBodyNotesYear , , , , , Make / Model GMC Jimmy Sierra Grande SeriesBodyNotesYear Make / Model GMC Jimmy Silverado SeriesBodyNotesYear Make / Model GMC Jimmy Street Coupe SeriesBodyNotesYear Make / Model GMC S15 Base SeriesBodyNotesYear Make / Model GMC S15 High Sierra SeriesBodyNotesYear Make / Model GMC S15 Sierra Classic SeriesBodyNotesYear Make / Model GMC S15 Sierra Grande SeriesBodyNotesYear
Sours: https://www.ecklers.com/chevy-gmc-truck-interior-coat-hookshtml
  1. Craigslist sacramento office space
  2. Instagram raffle app
  3. How much benadryl will kill a dog

GM Pickup Truck Repair Panels & Restoration Parts


With our Chevy truck aftermarket parts, you have virtually everything you need to restore or repair your pickup. No matter the cab type or model year, we&#;ll help you find what you need at a competitive price.

Raybuck offers an impressive selection of Chevy/GM truck body panels made of heavy gauge stamped steel. Our selection of body panels includes everything from cab corners and beds to floors, hoods and wheel arches. We also offer a complete selection of driver and passenger side Chevy and GM truck door panels and rocker panels.

We make it easy to find all the auto body parts you&#;re looking for. Our inventory includes high-quality aftermarket body and chassis parts including:

We also have a full assortment of window replacement parts like door window cranks as well as manual, power and power without motor window regulators.

If you&#;re fixing up the inside of your truck, we offer a variety of interior Chevy truck parts, from seats and flooring to heat shield sound deadeners and inside door handles. Our parts will help you restore your interior fast and affordably.


When you shop Raybuck Auto Body Parts online, you get parts manufactured in state-of-the-art production plants under the rigid guidelines of International ISO Standards. Our manufacturers stamp form truck body panels and other parts to the precise specifications of the original part or design. As a result, you benefit from the highest quality part and superior consistency of fit and performance.

For over 30 years, we&#;ve been providing our customers with reliable parts and the best customer service in the industry. Get in touch with us and take advantage of our experience and expertise. We&#;ll help identify the right parts for your Chevy/GM truck restoration or repair project.

Shop our website for all of the Chevy truck aftermarket parts you need. Contact us online or give us a call to speak with our team today.

Sours: https://raybuck.com/panels/chevrolet-gmc/gm-pickup-truck/

Classic Chevy Interior Parts for Trucks

While cars and trucks may drive, look and feel a lot different, a comfy and functional interior are vital for both. Eckler's Classic Chevy has the industry's leading selection of Chevrolet interior parts for trucks to restore or customize your cab. We make and stock interior hard goods that fit Chevy trucks from the Advance Design to the present-day Silverado and Colorado. If you need C/K Series Chevy truck interior parts, Chevy S10 interior hard parts or GMC Sierra cab parts, Classic Chevy should always be the first place you look.

Interior Performance and Style

You'll enjoy driving a vintage truck more than ever once you've added the right parts. Start with essentials such as Chevy truck gauges to monitor information and Chevy steering components that make the wheels respond to your commands. You can purchase full Chevy truck dashboards, pedals, heating systems and center consoles that are as good as or better than the original parts. There's plenty of opportunity for customization and creature comfort, too. Get a shiny new shift knob, extra interior storage or some Chevy emblems that personalize your truck. Hearing too much from the outside? Chevy truck sound-deadening materials reduce noise and vibrations while also improving climate control.

Care for Your Chevy Truck Interior

Updating the inside of your truck shows you care about more than just how a vehicle looks to others. By shopping at Classic Chevy, you'll get the best parts, prices and service for DIY automotive projects of all sizes. Just enter your GM truck make, model and year into the Add My Vehicle tool to see what's in stock. We work with brands such as Auto Meter, ididit, Flaming River, New Vintage Gauges and H3R Performance - and if someone else doesn't make the right part, then we make it ourselves. Place your order now and see why we've been a restoration leader since

Sours: https://www.classicchevy.com/interior-hard-parts/chevy_trucks

Interior truck 1982 chevy

Chevrolet C/K (third generation)

American truck series

Motor vehicle

Third generation (Rounded Line)
 Chevrolet C20 Silverado Camper Special regular cab front view.jpg
Also&#;calledChevrolet/GMC R/V series ()
Production– (United States, Canada, Mexico, Venezuela)
– (Argentina, by Chevrolet)
– (Argentina, by Sevel)
AssemblyAtlanta, Georgia
Baltimore, Maryland
Pontiac, Michigan
Flint, Michigan
Tarrytown, New York
Kansas City, Missouri
St. Louis, Missouri
Janesville, Wisconsin
Norwood, Ohio
Fremont, California
Oshawa, Ontario
Córdoba (Argentina)
Arica, Chile (–)
DesignerBill Mitchell ()
Body&#;style2-door pickup truck
4-door crew cab pickup truck
2/4-door Chassis cab
RelatedChevrolet K5 Blazer/GMC Jimmy
Chevrolet/GMC Suburban
Engine&#;cu&#;in (&#;L)I6
&#;cu&#;in (&#;L) I6
&#;cu&#;in (&#;L)V6
&#;cu&#;in (&#;L)V8
&#;cu&#;in (&#;L) V8
&#;cu&#;in (&#;L) V8
&#;cu&#;in (&#;L) V8
&#;cu&#;in (&#;L) V8
&#;cu&#;in (&#;L) OldsmobileDiesel V8
&#;cu&#;in (&#;L) Detroit Diesel V8
Transmission3-speed Turbo Hydra-Matic automatic
3-speed Turbo Hydra-Matic automatic
4-speed Turbo Hydra-Matic R4 automatic
3-speed Saginaw manual
4-speed Saginaw Muncie SM manual
4-speed New Process NP overdrive manual
Wheelbase&#;in (2,&#;mm)
&#;in (3,&#;mm)
&#;in (4,&#;mm)
Length&#;in (4,&#;mm)(–75)
&#;in (4,&#;mm)()
&#;in (5,&#;mm)
&#;in (6,&#;mm)[1]
Height&#;in (1,&#;mm)
PredecessorGM C/K (Action Line)
SuccessorChevrolet C/K (fourth generation) (GMT)

The third generation of the C/K series is a range of trucks that was manufactured by General Motors. Marketed under the Chevrolet and GMC brands from the to the model years,[2] this generation is the longest-produced version of the C/K model line. Adopting the "Rounded Line" moniker by General Motors, the third-generation C/K is the second longest-produced generation of American pickup trucks (behind only the – Dodge D/W-series/Ram pickup).

Introduced as the successor for the – "Action Line" C/K trucks, the third generation C/K expanded its product range to a four-door crew cab pickup truck for the first time alongside the traditional two-door pickup and chassis cab trucks. As with the previous generation, the model line served as the basis for the Suburban and Blazer/Jimmy full-size SUVs and shared body commonality with GM medium-duty commercial trucks.

For the first time, GM marketed a generation of the C/K concurrently with its successor, leading the company to designate the third generation as the Chevrolet/GMC R/V for For the model year, the GMT chassis architecture adopted the C/K nomenclature for a fourth generation, with the R/V series ending production in Over its 18 model years of production, the Rounded-Line series of trucks (as the C/K and R/V series) were produced in multiple facilities across the United States, Canada, and South America.

From to , the Rounded Line C/K trucks were produced in multiple facilities across the United States, Canada, and South America.


Development of the third-generation C/K trucks began in ; vehicle components underwent simulated testing on computers before the first prototype pickups were even built for real-world testing.[3] The finished product would become revolutionary in appearance, breaking away from typical American pickup truck design of the era (including the cab). The exterior design underwent scrutiny in the wind tunnel to optimize its aerodynamics and fuel economy.[4] While distinguished by its straight-lined and boxy appearance, GM named the third-generation C/K the "Rounded Line" series, succeeding the "Action Line" C/K trucks.[5]

The largely rectangular front fascia of the Rounded Line trucks (leading to the colloquial "Square-body" and "Box-body" nicknames from the media and public[5][6][7]) led to many departures from previous generations of C/K truck design. As with GM cars, the hoodline of the C/K trucks was faired into the front fenders (replacing the clamshell design). While a wraparound windshield (from the Task Force trucks) was never under consideration, a more widely curved windshield (along with curved windshield glass) was added to the cab.[8] To visually integrate the cab with the pickup truck bed, a shoulder line wrapped from fender to fender around the vehicle (on Fleetside/Wideside beds).[6][8] To further reduce noise, the mast antenna was removed and was embedded within the windshield glass.[6][9][10] The interior of the C/K trucks underwent major functional changes, replacing the completely flat dashboard with a sedan-style design, centering controls and gauges closer to the driver.[8]

Model history[edit]

Across its year production, the third-generation C/K model line underwent several minor revisions. For , the trucks underwent a mid-cycle revision. To accommodate the calendar-year introduction of the fourth-generation C/K for the model year, GM re-designated the third-generation C/K as the R/V series for Sold alongside its successor, the R/V series was produced through the model year.


Chevrolet Silverado K20
GMC Sierra Classic crew cab (single rear-wheel)

For and , the C/K model line was given a recessed front grille with orange turn signals (GMC grilles were divided in thirds[11]).[12] For , door-mounted drip moldings were added as an option (becoming standard in ).[2][13]

For , the front fascia underwent a minor revision, with Chevrolet replacing the recessed grille with a flush-mounted design (appearing brighter in color);[12] GMC introduced a six-segment grille (splitting the – grille in half).[14] The trim lines underwent a major realignment, as Chevrolet introduced the Scottsdale and Silverado trims. In response to extended-cab Ford and Dodge pickups, a C20 four-door pickup with no rear seat is introduced, offering additional storage space.[2][7]

For , engine displacement decals were removed from the grille; a voltage gauge replaced the ammeter in the instrument panel.[2] In another change, the simulated woodgrain exterior trim is discontinued (woodgrain interior trim remains in use for door panels and the dashboard on upper-trim models[15]). The optional wheelcovers were revised; a flatter design was introduced for both Chevrolet and GMC with black-painted accents.

For , the front fascia underwent a second revision, with both Chevrolet and GMC receiving larger-segment grille designs.[12][16][17] On all trims, the interior received revised door panels (covering a larger portion of the doors).[18] As an option, the C/K offered power windows and power door locks for the first time.[19] The model year was distinguished by a redesigned fuel-filler door (replacing the exposed fuel cap); woodgrain dash trim (for the Cheyenne and Silverado) was replaced by brushed-aluminum trim.[2][20]

For , the front fascia underwent a minor facelift. While sharing the same stamping as before, the vertical bars were painted dark gray; chrome trim incorporated the turn signal lenses, giving chrome to nearly the entire front fascia.[12][21] In line with Fleetside/Wideside trucks, Stepside/Fenderside and Big Dooley trucks replace exposed fuel caps with fuel-tank doors.

For , the front fascia underwent an additional update. While GMC trucks carried over the same grille from , Chevrolet trucks received an all-new grille (its first completely new design since ).[2][22] Square headlights made their appearance for the first time on Silverado-trim models;[2] lower-trim vehicles used a combination of the grille and the (round) headlight surround.[23]

mid-life cycle facelift[edit]

Chevrolet C10 Custom Deluxe Diesel (New Zealand)
GMC Sierra Classic

The Rounded Line trucks underwent a mid-cycle redesign for the model year. Largely in response to the energy crisis, GM engineers again turned to wind tunnels to further reduce areas that hindered air flow and caused drag,[24][25] along with shedding nearly pounds of curb weight from the model line.[7]

While design changes were largely evolutionary (to preserve sales of the highly profitable model line), the body of the C/K trucks was completely reshaped forward of the windshield. While retaining a distinct shoulder line wrapping around the body, the front fenders were reshaped to include a lowered hoodline (relocating the side marker lights); the windshield wipers were now exposed.

As part of the body facelift, the C/K pickup trucks received new grilles and redesigned front bumpers; Chevrolet grilles were split in the middle by a silver/black bar, with GMC grilles divided into ten squares.[12][26][27] Square headlights became standard for the first time; base-trim trucks were fitted with two headlights and upper-trim trucks received four headlights (relocating the turn signal lenses to the front bumper). For the first time since , fender badging was revised, with scripted badging replaced by block lettering (a design that would last through ). The interior underwent its own revision, receiving updates to the seats, door panels, and dashboard.[2]

For , the front fascia underwent a trim revision, with a chrome bumper and a chrome-trim front grille becoming standard equipment.[2] In a functional change, 3&#;4-ton and 1-ton trucks switched from inch to inch wheels (to adopt more commercially available tires).[2] To denote the introduction of a &#;L diesel V8, vehicles with the diesel engine received fender and tailgate badging denoting the diesel engine.

For , the front fascia underwent a minor revision. Along with dropping the two-headlight configuration, Chevrolet and GMC received revised grilles (including the turn signals behind them[2]). For , the two-headlamp configuration returned for base-trim vehicles (relocating the turn signals from the grille to the headlamp surround[28]).[2][7]

For , the grille was changed for the last time (as the C/K).[2][29] On two-tone Chevrolet trucks, the center of the grille was painted body-color (in place of silver); for the first time, C/K trucks were offered with optional cast-aluminum wheels.[30]

R/V-Series (–)[edit]

– GMC Sierra R SL

For the model year, GM renamed the C/K series as the R/V series. Largely intended to distinguish the C/K series from its GMT successor (which would be produced alongside it), "R" was used for two-wheel drive and "V" for four-wheel drive;[31] the nomenclature change was also applied to the vehicle identification number (VIN).[32] The R/V models continued production at Janesville, St. Louis, and Flint; the new GMT trucks entered production December 8, at Pontiac East, Oshawa, and the new Fort Wayne plant.[33]

For , in a visible exterior change, the R/V trucks received a fender-mounted radio antenna, deleting the windshield-integrated design used since In a trim change, GMC dropped its previous four-Sierra trim levels with a SL/SLX/SLE nomenclature; Chevrolet replaced the Custom Deluxe base trim with the return of the Cheyenne trim. To reduce model overlap, the 1&#;2-ton R/V pickup was discontinued (to shift buyers to the all-new fourth-generation C/K).

For , all R/V pickup trucks (and related SUVs) underwent their most visible facelift since While retaining the same fenders and hood from to , the grille was redesigned for a nearly flush appearance, with much of the trim painted black. For both Chevrolet and GMC, two versions were designed; a twin headlight version was offered (for base trims) and a quad headlight version for all upgraded trims (and non-fleet Blazers and Suburbans).[2] In another nomenclature change, the R/V series adopted the / series payload series for both GMC and Chevrolet.

For , the R/V series was reduced in size for a second time, as the series 3&#;4-ton trucks were discontinued. 1-ton crew-cab pickups and chassis cabs continued in production by Janesville while full-size SUVs were produced by Flint. GM had sent the tooling for the two-door cab production to Mexico (where it was produced for local markets through ).[citation needed] Medium-duty C/K trucks were discontinued, replaced by the GMT architecture.

After an year production run, marked the final year for the "Rounded Line" truck series. After trailing the rest of the C/K series for nearly five years, one-ton crew cab pickups, the Suburban SUVs, and the K5 Blazer/V-Jimmy all adopted the GMT architecture. To end nameplate confusion with its compact SUVs, GMC renamed the Jimmy as the GMC Yukon for , with the Chevrolet K5 Blazer becoming the Chevrolet Tahoe for

Model overview[edit]

The third-generation C/K series was marketed by Chevrolet and GMC divisions. Marketed primarily as pickup trucks, the C/K trucks were also offered as chassis cab vehicles. Marketed in 1&#;2-ton, 3&#;4-ton, and 1-ton (nominal) payload series, C/K pickup trucks were offered in two cab designs, three bed configurations, and three wheelbase lengths.

In response to the introduction of the Ford F, the Chevrolet "Big 10" high-GVWR 1&#;2-ton was introduced for [34]


Third-generation C/K pickups have a high tensile strength carbon steel ladder type frame with a "drop center" design.[9][35][36] The steering system is a variable-ratio recirculating ball steering gear; hydraulic power assist was optional.

On all pickup trucks, the model line was fitted with front self-adjusting disc brakes and rear finned drum brakes. Power-assisted brakes were optional, with either four-wheel hydraulic Hydra-Boost or Vacuum-Boost power assist.[3]

C-Series pickups included two-wheel drive and featured an independent front suspension (IFS) system with contoured lower control "A" arms and coil springs. Rear suspension (marketed as Load Control by GM) was dual-stage multi-leaf springs supporting a live rear axle, replacing the coil-spring configuration of the previous two generations. To further stabilize the rear axle under loads or acceleration,[9] the rear shock absorbers were placed asymmetrically from one another (on each side of the rear axle).

The wheelbase length was extended to in (2,&#;mm) for short wheelbase pickups, and in (3,&#;mm) for long wheelbase pickups. For 1-ton pickups, a dual rear-wheel option (called "Big Dooley") was introduced, alongside a four-door crew-cab; the latter used a inch wheelbase on either single or dual rear wheels.


Towing and payload capacity ratings for Rounded Line C/K-Series pickups varied (dependent on configuration). Factors such as engine and transmission combination, differential gear ratio, curb weight, and whether the pickup was two-wheel drive or four-wheel drive decided how much the pickup could safely tow or haul.

A properly equipped C-Series half-ton class pickup could tow up to 8,&#;lbs (4 tons) of braked trailer, while a properly equipped C-Series three quarter-ton or one-ton class pickup could tow up to 12,&#;lbs (6 tons) of braked trailer.[37] Adding four-wheel drive reduced towing capability due to increased curb weight, which resulted from additional driveline components (transfer case, front axle, front differential, front propeller shaft, and so on) needed to facilitate four-wheel drive. A properly equipped K-Series half-ton or three quarter-ton class pickup could tow up to 6,&#;lbs ( tons) of braked trailer; a properly equipped K-Series one-ton class pickup could tow &#;lbs more, up to 7,&#;lbs ( tons) of braked trailer.[37]

Heavy-duty towing equipment was available for both C and K-Series pickups, such as the Trailering Special package (included power steering, uprated battery, and uprated generator), 7-pin trailer electrics connector, heavy-duty engine oil cooler, heavy-duty transmission oil cooler, and a weight distributing trailer hitch.[38][39] An optional Elimipitch camper was made available for the Big Dooley.[40]


At its launch, the Rounded-Line pickup trucks were offered with five different engines. A cubic-inch inline-six was standard, with the option of a cubic-inch inline-6, a cubic-inch V8, a cubic-inch V8, and a cubic-inch V8.[41][42] Available only in two-wheel drive C-series trucks, the replaced the cubic-inch "" V8; the was offered only for [2]

During the s, the model range underwent several revisions to its powertrain line. For , a cubic-inch V8 was introduced as the largest engine option for K-series trucks, slotted above the ;[2] in another change, catalytic converters were fitted to all trucks under &#;lbs GVWR.[2][7] For , a cubic-inch V8 was introduced for C-series half-ton trucks, expanding the engine range to six.[2][43] For , General Motors became the first major American manufacturer to market a light-duty truck with a diesel engine, offering a cubic inch Oldsmobile diesel V8 as an option for half-ton C-series trucks;[2][44] the engine also marked the launch of the Oldsmobile diesel engine family.

During the s, the C/K trucks saw additional revisions to the powertrain line, shifting towards more advanced engine designs. As part of the model revision, the V8 became available on K-series trucks for the first time, replacing the V8 entirely.[2] To improve its fuel efficiency, the V8 received electronic spark control (in markets outside of California); the became the standard V8 for California.[24]

For , the Oldsmobile diesel was replaced by a cubic-inch (&#;L) Detroit Diesel V8,[45][46] shifting the diesel engine from the 1&#;2-ton series to 3&#;4-ton and 1-ton trucks. To further improve fuel economy, an automatic overdrive transmission was made available: the four-speed Turbo Hydra-Matic R4.

For , the long-running inline-6 (the standard C/K engine since ) was replaced by the cubic-inch (&#;L) V6.[2][7]

As the Rounded-Line series were redesignated the R/V trucks for , several changes were made to the powertrain line. The I6 was dropped from 3&#;4-ton and 1-ton trucks, with the &#;L V6 becoming the sole 6-cylinder engine; all engines adopted fuel injection (with the exception of the &#;L diesel).[2][31] In addition, a "smart" powertrain control module (PCM) was also introduced, which controlled the fuel injection system, fuel-to-air burn ratio, engine ignition timing, and (if equipped with an automatic transmission) the Turbo Hydra-Matic's turbinetorque converter clutch.[47]

Following the transition of 1&#;2-ton pickups to the fourth-generation GMT chassis, the R/V series was offered with three engines from to a standard &#;L V8 with the option of either a &#;L V8 or the &#;L diesel V8.[48]

Chevrolet/GMC C/K powertrain details ()[49][50]
Engine Engine family Production Code


Output Notes
Horsepower Torque
&#;cu&#;in (&#;L) I6 Chevrolet straight-6LD4 &#;hp (78&#;kW) &#;lb⋅ft (&#;N⋅m)
LE3 &#;hp (97&#;kW) &#;lb⋅ft (&#;N⋅m)
&#;cu&#;in (&#;L) V6 GM 90° V6 LB1 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) 4-bbl
LB4 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) TBI
&#;cu&#;in (&#;L) I6 Chevrolet straight-6L25 &#;hp (89&#;kW) &#;lb⋅ft (&#;N⋅m) 1-bbl
&#;cu&#;in (&#;L) V8 Chevrolet small-block V8LE9 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) state (4-bbl)
LF3 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) CA emissions
LG9 &#;hp (97&#;kW) &#;lb⋅ft (&#;N⋅m) 2-bbl
LO3 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) TBI
&#;cu&#;in (&#;L) V8 Chevrolet small-block V8 LG8 &#;hp (97&#;kW) &#;lb⋅ft (&#;N⋅m) state
&#;cu&#;in (&#;L) V8 Chevrolet small-block V8 LS9 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) 4-bbl
LT9 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) 4-bbl; 3&#;4 and 1-ton chassis
LO5 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) TBI; R/V series
&#;cu&#;in (&#;L) V8 Oldsmobile Diesel V8LF9 &#;hp (89&#;kW) &#;lb⋅ft (&#;N⋅m) naturally-aspirated diesel; indirect injection

C-series 1&#;2-ton chassis only

&#;cu&#;in (&#;L) V8 Detroit Diesel V8 LH4 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) naturally-aspirated diesel; indirect injection

3&#;4 and 1-ton chassis

LH6 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m)
LL4 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m)
&#;cu&#;in (&#;L) V8 Chevrolet small-block V8LF4 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) equipped for HD emissions only

K-series only

&#;cu&#;in (&#;L) V8 Chevrolet big-block V8

(Mark IV)

LE8 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) 4-bbl; C-series trucks only before
LT9 &#;hp (&#;kW) &#;lb⋅ft (&#;N⋅m) TBI; R/V series

Four-wheel drive systems[edit]

Throughout their production, K-Series (later V-series) pickup trucks included multiple four-wheel drive systems. Regardless of the type of four-wheel drive system equipped, all K-Series pickups featured four-corner Vari-Rate multi-leaf springs, front live axle with symmetrical (inline) shock absorber geometry, and the Load Control rear suspension system. K-Series pickups also featured an off-road oriented design, with the transfer case bolted directly to the transmission and running gear tucked up as high as possible under the vehicle to reduce the chances of snagging vital components on obstacles, as well as to achieve a low silhouette and optimal ground clearance.[51] Exposed brake lines wrapped in steel were standard, with underbody skid plate armor optional for further protection.


Offered as standard equipment for K-series trucks with inline-6 engines,[52] the conventional four-wheel drive system was equipped with a two-speed New Process transfer case with four drive modes: Two High, Four High, Neutral, and Four Low. Two High gave a torque split, while Four High yielded a locked torque split. Four Low applied reduction gearing. The front and rear propeller shafts were locked at all times in Four High and Four Low. Neutral allowed for flat towing, or use of the power take off (PTO).[53]

Shift-on-the-move (–)[edit]

A new Shift-on-the-move four-wheel drive system with two-speed dual range New Process aluminium transfer case was introduced on K-Series pickups for the model year. It replaced the permanent four-wheel drive system, on pre models. The shift-on-the-move four-wheel drive system featured new automatic self locking hubs and synchronized direct high range planetary gearing, such that the truck could be shifted from two-wheel drive, to fully locked four-wheel drive at speeds of up to 25&#;mph.[54] Once the shift from two-wheel drive to four-wheel drive was made, the vehicle could be driven at any forward or reverse speed. Four drive modes were offered: Two High, Four High, Neutral, and Four Low. Two High gave a torque split, with Four High yielding a locked torque split through direct synchronized gearing. Four Low applied reduction gearing with a ratio, compared to the previous New Process 's The front and rear propeller shafts were locked at all times in Four High and Four Low. Neutral was provided for disengagement of both propeller shafts. Conventional four-wheel drive was still available with manual locking hubs.

Full-time (–)[edit]

Full-time four-wheel drive pickups featured a two-speed New Process transfer case with center differential and lock. Five positions were provided: High Loc, High, Neutral, Low, and Low Loc. In High the center differential was unlocked and allowed the front and rear propeller shafts to slip as needed for full-time operation. The system could be manually shifted into High Loc which locked the center differential for a locked torque split. Low and Low Loc applied reduction gearing with or without lock, depending on the mode selected. Neutral was also available for use of the PTO.[53]

A new Eaton Automatic Differential Lock (ADL) was introduced in as an optional extra on the Rounded-Line C/K-Series pickups, for the rear hypoid differential. The new automatic locking differential was offered under the G86 code, replacing the Eaton NoSpin differential, and eventually replacing the old Positractionlimited-slip differential in , at which point it assumed the G80 code.[55] The Eaton ADL featured intelligent differential control via an internal governor which monitored vehicle speed and wheel slip to know when to automatically lock and could lockup percent at or below 20&#;mph (32&#;km/h) increasing tractive effort. The differential lock would unlock and deactivate at speeds above 20&#;mph for safety reasons, such as the vehicle being on dry pavement.[56]

For , a K30 (four-wheel drive, full one-ton chassis) was added to the lineup, and a Dana 60 was used for the front axle. For the model year, full-time four-wheel drive was discontinued on K-Series, leaving only conventional four-wheel drive.

Body design[edit]

The third-generation C/K marked several firsts to the model line. Alongside the two-door regular cab, a four-door crew cab made its debut. While trailing Dodge, Ford, and International by a decade in bringing a crew cab pickup truck to production, the C/K crew cab shared its body construction with the Suburban wagon (giving it four passenger doors for the first time). Derived from the C/K chassis cab, "Big Dooley" was the first factory-produced dual rear-wheel pickup,[7] sold only as a one-ton truck.[2]

Five different bed designs were offered, with 61&#;2 and 8-foot versions of the Chevrolet Fleetside (GMC Wideside) and Chevrolet Stepside (GMC Fenderside); to cover its extra set of rear tires, "Big Dooley" was a hybrid of the two designs, offered only in an 8-foot length.


Soft touch materials were used throughout the passenger cabin, such as the dashboard, doors (arm rests), steering wheel, and shift levers. Subtle grained interior panels and bright metal work was used on the inside with high-quality materials also used on the outside, like chrome, aluminum, and polished stainless steel, particularly on top-of-the-line luxury Silverado or Sierra Classic trim levels. Custom Vinylvinyl or soft Custom Cloth cloth and velour seating surfaces were used along with fabric headliners, door inserts, and plush carpeting, depending on the trim level. Upper class trim levels also used acoustic deadening materials for quieter ride comfort.[24] From model years to , chestnut wood grain inserts were used on the dashboard and doors for further visual enhancement. The wood grain inserts were replaced by bright brushed aluminum inserts for model years to [57] A Delco AM/FM audio sound system and an all-season climate control system were optional extras.[58]

The four-door crew cab was offered in two configurations. Along with the standard six-seat (badged as "3+3") crew cab, a "Bonus Cab" configuration was offered, deleting the rear seat of the crew cab (effectively a 3-seat truck with a large internal storage area).


The usage of the C/K nomenclature was carried over from the previous generation, with "C" denoting two-wheel drive trucks and "K" denoting four-wheel drive vehicles. Chevrolet trucks were denoted in a 10/20/30 series (for 1&#;2-ton, 3&#;4-ton, and 1-ton); GMC trucks returned as a // series. While the Chevrolet Cheyenne and GMC Sierra names were carried over from the previous generation, this generation marked the introduction of the Chevrolet Silverado and Chevrolet Scottsdale trims.


Chevrolet marketed its C/K pickups under four trim levels for , carried over from the previous generation.[59] The standard trim was the Custom, slotted below the Custom Deluxe; the top two trims were the Cheyenne and Cheyenne Super.[60]

The Custom was a basic vehicle with minimal exterior and interior trim, with the Custom Deluxe upgrading by adding color-keyed upholstery and interior trim and additional chrome trim.[60] Intended for personal use, the Cheyenne and Cheyenne Super added carpeting, a headliner, and additional sound insulation; the Super offered the most interior trim on the door panels.[60]

For , Chevrolet revised its C/K trim lines, with two making an appearance for the first time. The Scottsdale was slotted above the Custom Deluxe (which replaced the Custom as the base trim) and the Silverado replaced the Cheyenne Super as the flagship trim. For , Chevrolet discontinued the Cheyenne trim line, largely consolidating it with the Silverado.[60] The Cheyenne name returned for , serving as the base trim of the fourth-generation C/K, alongside the R/V pickup and Suburban.

During the s and early s, Chevrolet marketed the Bonanza appearance package coupled with the Scottsdale (and later Silverado) trim, adding upgrades such as interior carpeting.[60]


In line with Chevrolet, GMC introduced four trim levels for its third-generation C/K pickup trucks.[61] Custom served as a base trim (the only name in common with Chevrolet) below Super Custom. As a counterpart of the Cheyenne and Cheyenne Super, GMC offered the Sierra and Sierra Grande, respectively.[61] For , in a revision of its C/K line, all GMC pickups became Sierras, with the Sierra becoming the base trim, followed by the Sierra Grande, High Sierra, and Sierra Classic.[60]

For , GMC followed suit with Chevrolet, downsizing to a three-trim line; the Sierra Grande was dropped. For the fourth-generation C/K, GMC dropped the external C/K nomenclature, with all pickup trucks becoming Sierras (C/K remaining in use for internal model codes). For , GMC adopted the trim nomenclature of the fourth-generation C/K for the R/V series pickups.

In line with the Chevrolet Bonanza, GMC offered the Royal Sierra appearance package, coupled with the Sierra Grande and High Sierra; in Canada, GMC offered several Sierra Wrangler exterior appearance packages (prior to the use of the name by Jeep).[60]


Alongside the full-size pickup range, the "Rounded Line" C/K series also included a variety of other vehicles. The C/K (and R/V) chassis and body were used for the Chevrolet/GMC Suburban, the Chevrolet K5 Blazer/GMC Jimmy, and multiple GM commercial trucks for the s and the s.

Medium-duty trucks (–)[edit]

For , the General Motors medium-duty truck range (Class ) underwent a redesign. Slotted below the Class H/J and C/M heavy conventional trucks (designed by GMC), the Chevrolet-designed vehicles shared their cab with the Rounded-Line series. With the exception of the steering column and gear shifter, the model lines shared much of their interior.

For , a Chevrolet V8 was offered alongside and cubic-inch GMC V6s;[62] a very rare option was the DH "ToroFlow" cubic-inch diesel V6.[63] For , GMC engines were discontinued,[63] with the replaced by and cubic-inch V8s (developed specifically for commercial use).

For , diesel engines made their return with the introduction of the Detroit Diesel &#;L "Fuel Pincher" V8. The same year, GM introduced the Chevrolet Kodiak/GMC TopKick.[63] Largely developed to accommodate the Caterpillar diesel V8 engine, the Kodiak was slotted between the medium C/K and the heavy-duty Bruin/Brigadier conventional; it received a larger, squared-off hood and grille, which required raising the cab several inches upward.

During production, GM shifted the design of its cowled bus chassis from the previous-generation medium-duty truck (introduced in ) to the Rounded-Line C/K series; the model line was produced through

After production, GM replaced the medium-duty C/K and the Kodiak/TopKick with a single medium-duty truck line (codenamed GMT[63]), using the GMT truck cab and adopting the Kodiak/TopKick name.

Chevrolet K5 Blazer V L

Chevrolet Blazer/GMC Jimmy (–)[edit]

Main article: Chevrolet K5 Blazer

For , GM introduced the second generation of the Chevrolet K5 Blazer and GMC Jimmy off-road vehicles (a precursor of the modern SUV). As with the previous generations, the Blazer/Jimmy were derived from a shortened 1&#;2-ton pickup truck chassis. For the first time, two-wheel drive was offered as standard equipment (most examples were K-series four-wheel drive vehicles). The popularity of the larger size led to the introduction of the Dodge Ramcharger (and Plymouth Trail Duster) and the redesign of the Ford Bronco; the model line also competed against the Jeep Cherokee and the International Scout II.

The Blazer/Jimmy shared the same external design changes as Fleetside/Wideside pickup trucks. For , the configuration of the body was updated, changing from a fully open convertible to a half-cab design; while the rear top remained removable, rollover protection improved for front-seat passengers.

For , the Blazer/Jimmy names were adopted by the GM compact SUV model names; to distinguish the compact model lines, GM added the S10/S15 model prefix. Following the transition to the R/V model nomenclature, the K5 Blazer was remarketed as the "full-size Blazer"[64] and the Jimmy became the "V-Jimmy".[65]

For , the second-generation Blazer/Jimmy were replaced in a transition to the GMT architecture; the V-Jimmy was renamed the GMC Yukon (with the K5 Blazer later becoming the Tahoe). In a major change, the removable hardtop design was discontinued (effectively making the model line a short-wheelbase version of the Suburban).

Chevrolet/GMC Suburban (–)[edit]

Main article: Chevrolet Suburban

Chevrolet Suburban C10 Cheyenne Super

For , General Motors introduced the seventh generation of the Suburban using the Rounded Line truck chassis. Marketed at the time as a truck-based station wagon,[66] the Suburban was marketed by both Chevrolet and GMC under the same nameplate. Far larger than the Jeep Wagoneer (by nearly 3 feet), the Chevrolet Suburban competed largely against its GMC namesake following the discontinuation of the International Travelall.

The first generation of the Suburban produced with four passenger doors, the seventh-generation Suburban shared many design elements with the C/K crew cab from the doors forward. In contrast to the 1&#;2-ton Blazer/Jimmy, the Suburban was offered in both 1&#;2-ton and 3&#;4-ton series, sharing all trim levels of the pickup trucks. While seating up to 9 passengers, the model line was sized between the A-body Chevelle/Malibu and B-body Impala/Caprice station wagons in length.

After becoming part of the R/V series in , the seventh-generation Suburban remained in production through the model year.


As it entered production for , the third-generation C/K-Series marked multiple safety advancements concerning full-size pickups. The model line was the first full-size pickup produced with a passenger-side sideview mirror as standard equipment. While in use in GM cars since , the Rounded-Line pickups were the first full-size trucks produced with an energy-absorbing collapsiblesteering column.[3][67][68]

For , outboard seats received 3-point (lap-and shoulder) safety belts with emergency locking retractors;[69] a center lap safety belt was used, with slack adjustment. For , Ford and Dodge would follow suit, adding the same seat belt design to their full-size trucks.[70][71]

Other safety features included soft-padded interior panels for appearance and safety, 3, square inches of tempered and laminated safety glass, prismatic rearview mirror, six turn-signal indicator lamps with asymmetrical flash, four-way hazard function, and lane departure function.[3][24][72][73]


During the development of the Rounded-Line generation of pickup trucks in the late s, the fuel tank was relocated from inside the cab to the outboard side of the right frame rail (if an auxiliary fuel tank was specified, both frame rails).[74][75] Commonly referred to as a sidesaddle configuration, the decision was largely made in the interest of reducing in-cab exposure to fuel vapors (and to carry more fuel[76]).[77] After the discontinuation of the model line, the design underwent both media and government scrutiny related to potential fire hazards of the configuration.

The successor fourth-generation – C/K pickup trucks were designed with a single fuel tank located between the frame rails; the model line was designed well before the sidesaddle fuel tank configuration received media controversy.

Dateline NBC report[edit]

On November 17, , Dateline NBC aired an investigative report titled "Waiting to Explode". Coinciding with federal investigations into the model line, Dateline focused on allegations on the third-generation C/K trucks exploding in side-impact collisions due to the design of the fuel tanks.[78] As a central part of the episode, Dateline showed sample footage of a low-speed accident in which the fuel tank exploded. In what would become a controversy of its own, the program did not disclose that the accident was staged to optimize an explosion.[79][80]

During the report, a third-generation C/K caught fire in an 30 MPH side-impact test collision. Following subsequent investigation, the speed of the collision was found to be higher (approximately 40 MPH). After finding the charred wreckage of the tested GM pickups, GM investigators Failure Analysis Associates (FaAA, now Exponent) examined the fuel tanks of the vehicles; after X-ray examination, it was discovered that none of them had ruptured after collision.[78] It was also found that to stage the explosion, NBC experts used model-rocket engines coupled with a leaking fuel cap to stage the explosion.[81] After reviewing the video itself, smoke was found erupting underneath the truck a few frames before the collision; additionally, the subsequent fire lasted for only 15 seconds.[81][82]

Regardless of any increased risk of fire, the GM trucks had safety records in side-impact crashes statistically indistinguishable from their Ford and Dodge counterparts. The sidesaddle fuel tanks themselves were found to have a robustdesign highly resistant to crushing or crumpling from a side impact. Trucks equipped with these tanks met and exceeded the requirements of Federal Motor Vehicle Safety Standard No. Studies showed that it would take about 4, side-impact crashes with such a truck to get one with fire, major injury, or fatality.[83]

On February 8, , after announcing its anti-defamation/libel against NBC, GM conducted a highly publicized point-by-point rebuttal in the Product Exhibit Hall of the General Motors Building in Detroit that lasted nearly two hours.[84][85] On February 10, , GM settled with NBC, resulting in multiple NBC personnel losing their jobs.[80][86]

Government investigation[edit]

In April , General Motors rejected a government request to issue a recall for all C/K pickup trucks, claiming that it would involve over 6 million vehicles at a cost of over $1 billion.[76] As of today, such a recall would have been the third-largest ever (in terms of size).[87] On October 17, , U.S. Transportation Secretary Federico F. Pena announced that a two-year investigation had found that the trucks posed a fire hazard; federal officials estimated that persons may have died in preventable fiery crashes.[76] In its investigation, the government found that the C/K trucks were at least times more likely to produce a fire-related fatality from a side-impact crash than a comparable Ford or Dodge pickup truck.[76]

The gas tanks leaked in at least two crash tests performed by GM around the time the trucks were first sold in [citation needed] The federal report also stated that 50 MPH crash tests performed in the early s "clearly demonstrated" the tanks were susceptible to puncturing.[citation needed]

As most recalls are issued by the manufacturer, government-issued recalls are fairly rare (only 8 had been issued at the time of the investigation[76]). In the s, GM had blocked an effort in court for a recall over a suspected brake problem of the model line.[76] In response, the government clarified that vehicles sold in the United States must meet the National Traffic and Motor Vehicle Safety Act; along with meeting safety standards at the time of production, their production is also required to allow them to operate them safely under real conditions.[76]

GM also settled with the U.S. National Highway Traffic Safety Administration (NHTSA) in for the amount of $51 million to be used for safety programs. GM also offered owners $ coupons toward the purchase of a new truck with a trade-in of the old one.[88]

Class action lawsuits[edit]

In the bad publicity generated by the Dateline story spawned several class action lawsuits. In addition GM was sued more than times in lawsuits brought by individuals who were burned in GM trucks.[89] Nearly all of those cases were settled out of court. In , a Georgia jury awarded more than $ million, including $ million in punitive damages, to the parents of a 17 year old named Shannon Moseley who burned to death.[89] The verdict was later overturned by an appeals court[88] and the case settled before it could be re-tried.

Fatality figures vary wildly. A study by Failure Analysis Associates (now Exponent, Inc.) found fatalities in these GM trucks between and involving both side impact and fire.[90] The Center for Auto Safety, Ralph Nader's lobbying group, claims "over 1, fatalities" between and involving both side impact and fire.[91]

Foreign production[edit]

Chevrolet D Conquest

Sevel Argentina S.A. built the Chevrolet C10 in its Córdoba plant from to The gasoline version used the Chevy &#;CID engine (4,&#;cc) familiar to most Latin American markets, producing &#;hp. Because of Sevel being a subsidiary of Peugeot, the C10 was also available with a 70&#;hp Indénor XD2 2,&#;cc diesel engine, perhaps best known in the US from the Peugeot

In Brazil, General Motors do Brasil produced the Rounded-Line series as the 10/20 series.[92] Introduced in , the model line replaced the locally produced C10 (derived from the first-generation C/K).[92] The model line was marketed under three model series, designated by fuel (A=ethanol/gasoline flex-fuel, C=gasoline, D=diesel).[92] Sharing primarily its cab structure with its American counterpart, the 10/20 was produced with its own front fascia (sharing its headlights with the Chevrolet Opala[92]). Shared with the Opala, a &#;hp L inline-6 (discontinued in the United States in ) was used for gasoline and flex-fuel vehicles; an 87&#;hp L Perkins inline-4 diesel was offered.[93] For , a "double cab" was introduced, sharing the 4-door crew cab of its North American counterpart.[93] During the early s, the 10/20 series underwent several mechanical updates and was produced by GM do Brasil through , when it was replaced by the GMTderived Silverado produced in Argentina.[93]


  1. ^ Chevrolet Trucks and Vans, promotional brochure issued by manufacturer
  2. ^ abcdefghijklmnopqrstuvw" GM Pickup Differences". com. Retrieved
  3. ^ abcd" Chevy Pickups". brochures.slosh.com. Archived from the original on Retrieved
  4. ^"Miscellaneous Images". com. Retrieved
  5. ^ ab" Rounded-Line". www.stovebolt.com. Archived from the original on Retrieved
  6. ^ abcBrownell, Tom "Rounded-Line Models, –" Chevrolet Pickup Color History (Truck Color History) Chapter 9, pp. 88–89 Retrieved
  7. ^ abcdefg" History". chevytrucks.com. Retrieved
  8. ^ abc"Auto Restorer Magazine". com. Retrieved
  9. ^ abc" Chevy Pickups". brochures.slosh.com. Archived from the original on Retrieved
  10. ^"Vintage GM Advertisements". com. Retrieved
  11. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  12. ^ abcde"Miscellaneous Information". com.
  13. ^"Directory Index: GM Trucks and Vans/_Trucks-Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  14. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_GMC_Pickups_Brochure". oldcarbrochures.com. Retrieved
  15. ^" GMC Pickups Brochure". oldcarbrochures.com. Retrieved
  16. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  17. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  18. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  19. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  20. ^"Directory Index: GM Trucks and Vans/_Trucks_and__Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  21. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  22. ^"Directory Index: GM Trucks and Vans/_Trucks-Vans/album_". oldcarbrochures.com. Retrieved
  23. ^"Directory Index: GM Trucks and Vans/_Trucks-Vans/album_". oldcarbrochures.com. Retrieved
  24. ^ abcd" Chevy Pickups". brochures.slosh.com. Archived from the original on Retrieved
  25. ^"Vintage GM Advertisements". com. Retrieved
  26. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  27. ^" GMC Pickups Brochure". oldcarbrochures.com. Retrieved
  28. ^" Chevrolet Full Size Pickups Brochure". oldcarbrochures.com. Retrieved
  29. ^Gunnell, John A. (). Standard Catalog of American Light-Duty Trucks. Krause Publications. ISBN&#;.
  30. ^" Chevrolet Full Size Pickups Brochure". oldcarbrochures.com. Retrieved
  31. ^ ab" Road & Track Truck Buyers Guide". com. Retrieved
  32. ^"– Chevrolet Truck VIN#'s decoded and deciphered - Chuck's Chevy Truck Pages". Chuckschevytruckpages.com. Retrieved
  33. ^Ward's Automotive Yearbook . Ward's Communications, Inc. pp.&#;99,
  34. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  35. ^"Vintage GM Advertisements". com. Retrieved
  36. ^"Vintage GM Advertisements". com. Retrieved
  37. ^ ab"Trailering ( Chevy Trailering Guide)". www.brochures.slosh.com. Archived from the original on Retrieved
  38. ^" Chevy Pickups". brochures.slosh.com. Archived from the original on Retrieved
  39. ^" Chevrolet 4-Wheelers". www.lov2xlr8.no. Retrieved
  40. ^"Vintage GM Advertisements". com. Retrieved
  41. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  42. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  43. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  44. ^"Directory Index: GM Trucks and Vans/_Trucks_and__Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  45. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  46. ^– GM parts book LT Truck 52A Rev PG33
  47. ^"Wiring diagrams per model year". brochures.slosh.com. Retrieved
  48. ^"https://web.archive.org/web/fw_/http://brochures.slosh.com//comm0b.jpg". Archived from the original on January 4,
  49. ^Chevrolet C/K Truck Product Brochures. –
  50. ^" Transmissions and Engines". com. Retrieved
  51. ^" GM Brochures". com. Retrieved
  52. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  53. ^ ab" Chevrolet Four-wheel drive". www.lov2xlr8.no. Retrieved
  54. ^"Vintage GM Advertisements". com. Retrieved
  55. ^"Road Test Articles, ". com. Retrieved
  56. ^Gunnell, John. " to Chevrolet Pickups Grow Collectible Part 1: to ". pickuptrucks.com. Archived from the original on Retrieved
  57. ^" Chevy Pickups". www.oldcarbrochures.com. Retrieved
  58. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  59. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Trucks_Brochure". oldcarbrochures.com. Retrieved
  60. ^ abcdefg" Chevy/GMC Pickup Trim Levels". com. Retrieved
  61. ^ ab"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album_". oldcarbrochures.com. Retrieved
  62. ^" GMC Trucks Full Line Mailer". oldcarbrochures.com. Retrieved
  63. ^ abcdMeyer, Donald E. "THE FIRST CENTURY OF GMC TRUCK HISTORY"(PDF). p.&#;
  64. ^" Chevrolet Blazer Brochure". oldcarbrochures.com. Retrieved
  65. ^" GMC RV Brochure". oldcarbrochures.com. Retrieved
  66. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/album". oldcarbrochures.com. Retrieved
  67. ^" Consumer Reports article". com. Retrieved
  68. ^"Milestones in Automotive Safety". www.aa1car.com. Retrieved
  69. ^" Chevy/GMC Pickups". brochures.slosh.com. Archived from the original on Retrieved
  70. ^" Ford Pickups". www.lov2xlr8.no. Retrieved
  71. ^" Dodge Pickups". www.oldcarbrochures.com. Retrieved
  72. ^"GM Trucks and Vans". www.oldcarbrochures.com. Retrieved
  73. ^" Chevy Pickups". brochures.slosh.com. Archived from the original on Retrieved
  74. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  75. ^"Directory Index: GM Trucks and Vans/_Trucks-Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  76. ^ abcdefgG. M. Trucks Found to Be Fire Hazard Side-Saddle Tanks, New York Times, Barry Meier, Oct. 18,
  77. ^"Directory Index: GM Trucks and Vans/_Trucks_and_Vans/_Chevrolet_Pickups_Brochure". oldcarbrochures.com. Retrieved
  78. ^ ab"Seeing Is Not Believing". www.exponent.com. Archived from the original on January 22, Retrieved September 18,
  79. ^Olsen, Walter (February 28, ). "Exposing the "Experts" Behind the Sexy Exposés: How Networks Get Duped by Dubious Advocates". Washington Post.
  80. ^ abPARRISH, MICHAEL; NAUSS, DONALD W. (10 February ). "NBC Admits It Rigged Crash, Settles GM Suit". Los Angeles Times. Retrieved 4 February
  81. ^ abOlson, Walter (). "Walter Olson home page - The Dubious "Experts" Behind TV Crash Tests (Washington Post, 2/28/93)". Walterolson.com. Archived from the original on Retrieved
  82. ^"Where NBC Went Wrong". WhatReallyHappened.com.
  83. ^"The Most Dangerous Vehicle On the Road"Archived at the Wayback Machine, Wall Street Journal, Editorial by Walter Olson (senior fellow at the Manhattan Institute and author of "The Litigation Explosion"), Feb. 9,
  84. ^"GM vs. NBC, a New Wave of Employee Pride". GMHeritageCenter. Retrieved July 14,
  85. ^"GM Press Conference". 8 February
  86. ^Flinn, John (). "THRIVING ON FAILURE". SFGate. Retrieved
  87. ^"Biggest Auto Recalls of All Time – Page 4 – 24/7 Wall St". Retrieved
  88. ^ abGM Wins Appeal Over Side-Saddle Gasoline Tanks&#;: Courts: Jury had awarded $ million to the parents of a year-old boy who burned to death in traffic accident, Los Angeles Times, Donald W. Nauss, June 14,
  89. ^ ab"Jury Finds GM Negligent in Fuel Tank Case - The Tech". tech.mit.edu.
  90. ^"Case: Side Saddle Gas Tanks". Wadsworth.com. Retrieved
  91. ^"History of the GM Side Saddle Gas Tank Defect &#; The Center for Autosafety". Autosafety.org. Archived from the original on Retrieved
  92. ^ abcd"Os valentes da GM". Retrieved
Sours: https://en.wikipedia.org/wiki/Chevrolet_C/K_(third_generation)
How To Restore a C10 Squarebody Easy and Cheap!

Well, this cannot be after an enema," Baba Stasya was surprised, give me your hand. and now push with all your might. "The boy grabbed the palm of the woman with his right hand and with all his might squeezed the muscles of the anus.

You will also like:

Yes, I, like any healthy and normal person, want variety, but as a faithful spouse, I do not want and will not cheat on my husband. And dreams and fantasies are just dreams and fantasies and nothing more. Oksana answered.

14605 14606 14607 14608 14609