John deere platform header

John deere platform header DEFAULT

New header lineup unveiled by John Deere

John Deere has updated its entire header lineup for combines to include new HDR Rigid Cutterbar Drapers, RDF HydraFlex Drapers, CR and CF Corn Heads, and a BP15 Belt Pickup. Each is compatible with John Deere X Series and most S Series and T Series combines to optimize harvest capacity while minimizing grain loss in a wide range of crops and conditions.

HDR Rigid Cutterbar Drapers

If you’re a small grains, oilseed, or soybean grower looking to maximize the combine’s acres per hour across various crops, changing conditions, and uneven or rolling terrain all while capturing more grain, the HDR Rigid Cutterbar Drapers are the ideal solution. “The HDR has a new hinged frame that provides unmatched terrain-following capability with twice the wing range as a MacDon FD1 FlexDraper with uniform cut height when harvesting on curves or uneven terrain,” says Matt Badding, harvesting product manager for John Deere.

An HDR Draper will help unlock more of the combine’s harvesting capacity and capture more grain from the field, especially when harvesting down or lodged crops, according to Badding. “These easy-to-use drapers effectively pick up and sweep the down or lodged crop across the cutterbar to recover more crop thanks to a consistent distance between the reel fingers and cutterbar, improved reel range, and increased reel-drive motor torque,” he says. “HDR Drapers can be ordered with optional John Deere Grain Saver Draper Belts. These belts can save farmers up to $1, (USD; $1, CAD*) per year across 1, acres by reducing canola cutterbar loss up to 25% when compared with traditional, smooth draper belts.”

Available in cutting widths from 35 feet to 50 feet, the HDR Drapers bring more crop into the combine with each pass, which increases the number of acres harvested per hour and per day. “Farmers can upgrade from our foot-wide draper to the new foot-wide draper and can harvest up to 33 acres more per day,” Badding says.

RDF HydraFlex Drapers

Built on the field-proven cutting technology of the existing John Deere FD, while providing new features to reduce grain loss, the RDF HydraFlex Drapers are compatible with new X Series, S Series, and T Series Combines dating back to model year All feature a new Two-Speed Center Feed Section that lets operators slow down the feed drum and center feed belt by 20% compared with the FD. “This puts more grain in the tank by reducing free grain loss. Operators can easily go from low to high speed to save easy-shelling crops such as soybeans,” Badding says. “RDF HydraFlex Drapers reduce grain loss and let operators harvest at faster speeds without sacrificing cut quality.”

These drapers also include the John Deere 4-inch double-cut, dual-drive shaft HydraFlex Cutterbar. The knife system makes 1, cuts per minute to enable faster harvesting speeds. Two center feed belt options come standard to optimize the RDF HydraFlex Draper for multiple crops and conditions and minimize pod tossing in easy-shelling crops such as soybeans. There is also an optional cleated center belt to feed higher-volume crops like canola into the feed drum.

CR Rigid Corn Heads

John Deere CR Rigid Corn Heads help farmers who use X Series, S Series, and T Series combines to harvest more bushels per hour in high-yielding corn while minimizing grain loss and damage. “These heads feature a inch cross auger and rolled auger floor to help improve grain handling,” Badding says. “The higher torque of the large auger ensures the corn head is not the limiting factor so farmers can realize the true bushels-per-hour potential of the combine. The space between the auger flighting and rolled auger floor minimize the opportunity for ears to pinch or grind, reducing grain damage during harvest.”

For harvesting leaning, down, or flat crop, the corn heads can be factory-equipped with Active End Fenders that pull more stalks into the head as the combine moves through the field. In order to reduce tire or track wear caused by standing cornstalks and preserve the trade-in value of the combine and other equipment in fields, corn heads also include Stalk Deflectors that press standing stalks to the ground fracturing them at the base as the head passes over.

While the CF Folding Corn Heads include all the features of CR Rigid Corn Heads, they also have a low-profile folding frame. “These heads are ideal for farmers who demand high productivity in the field and easy transport between fields during tight harvest windows,” Badding says.

There are , , and row CF Folding Corn Heads available for X Series combines and row heads for S Series combines. Fold cycle time is less than 60 seconds when the corn head is connected to Deere S Combines and approximately 40 seconds with Deere X9 Combines. When moving between fields, operators will appreciate the 8-foot, 2-inch improvement in visibility over the FC and foot, 4-inch visibility improvement over the Geringhoff Rota Disc.

“A John Deere CF Folding Corn Head reduces a farmer’s operating costs by eliminating the need to purchase a header trailer to transport between fields,” Badding says. “The folding corn head also eliminates the time needed to mount the header to a trailer and then reattach it to the combine at the next field. After harvest, the head requires less storage space in the shed.”

BP15 Belt Pickup

In addition, John Deere is offering the BP15 Belt Pickup for small grains and oilseed growers who need to harvest more acres per hour with an X Series, S Series, or T Series combine. “These new belt pickups deliver a 20% faster feed rate than the Deere P to easily handle high-volume crops in tough conditions,” Badding says. “Compared with the P, this new pickup has a wider feederhouse opening with adjustable feed auger flighting and tines that allow this belt-pickup platform to harvest more acres per hour. When used with an X9 Combine, a BP15 can handle 30 acres of wheat or 23 acres of canola windrows per hour.”

The Belt Pickup features improved feed rate adjustability to handle large or bulky crops with a standard two-speed auger drive sprocket that delivers a 20% faster feed rate that’s ideal for harvesting canola. A slower speed feed rate can be used for less bulky crops like cereals and grass seed. The factory-installed crop shield prevents grain from building up and laying on the feederhouse keeping grain loss to a minimum. “Operators will spend less time making adjustments and more time harvesting,” Badding says. “For example, no tools are needed to adjust the height of the large, inch gauge wheels for varying windrow conditions and crop types.”

Each of the new drapers, corn heads, and the belt pickup come with a header control unit (HCU) that communicates seamlessly with the combine. The HCU saves head-specific factory calibration settings and collects and sends header-width information to the combine for accurate yield mapping. “The HCU also detects and reports header-specific diagnostic codes, plus tracks hours of use and maintenance intervals,” Badding says. “With this information in hand, farmers can now protect their new header investment with a John Deere PowerGard Protection Plan extended warranty program.”

John Deere dealers will start taking orders for the drapers, corn heads, and belt pickup later this summer. For more details, contact your local dealer or visit  

Note: This figure is based on foreign exchange rate as of March 31, , and assumption of  bushel savings of canola per acre.


Header Components


Platform wedge kit for John Deere® Series header (all degrees)

For use on John Deere® Series heads only.
LANKOTA will NOT accept returns on ANY wedge kit orders

To order, or for more information, contact your local John Deere®, CaseIH®, New Holland® or Agco® Dealer.

Click image for larger view


Shipping WeightShipping DimsShipping MethodInstallation
lbs82x24x12Freight hours
Additional Spec NameAdditional Spec Value
Degree Wedge Thickness"

No videos available for this product

No marketing material available for this product

The LAN enables you to adjust the cutter bar angle on your John Deere® Series platform header. This kit contains three different wedge angles; 1½, 3, and 4½ degrees.

  • For the 1½ degree wedge angle only, order the LAN
  • For the 3 degree wedge angle only, order the LAN
  • For the 4½ degree wedge angle only, order the LAN

DOES NOT FIT on any Flex Drapers

* "MSRP" is the Lankota suggested retail price. This price does NOT include any applicable shipping, taxes, installation or labor costs. All prices shown are in US dollars.

  1. Newest jeezy songs
  2. Petfinder charlotte nc dogs
  3. Utilization management specialist salary
  4. Lithia nissan ames

BP15 Belt Pickup Platform Headers from John Deere. Learn more about the features, specifications and more for the BP15 Belt Pickup Platform Headers .

  • Pick up 30 acres of wheat and 23 acres of canola windrows per hour with an X9 Combine and BP15*
  • Increase feed auger speed by 20% for canola and high-yielding wheat**
  • Appropriately set larger 20” gauge wheels without tools to match changing conditions
  • Save up to bushels of canola per acre with a factory installed Crop Shield***

Call Us

  • Anna, Ohio
  • Franklin, Indiana
  • Greenfield, Indiana
  • Greensburg, Indiana
  • Greenville, Ohio
  • Oxford, Ohio
  • Richmond, Indiana
  • Rushville, Indiana
  • Urbana, Ohio
Request a Quote


Anna, Ohio

Franklin, Indiana

Greenfield, Indiana

Greensburg, Indiana

Greenville, Ohio

Oxford, Ohio

Richmond, Indiana

Rushville, Indiana

Urbana, Ohio


Total picking width m
Header height controlElectrohydraulic
Number of fingers per belt84 center belts
77 outer belts
Auger diameter66 cm
26 in.
Auger fingersHeavy-duty and round with breakaway notch
Diameter: mm
Transport widths m
Header height controlElectrohydraulic
Width of belts m
Number of belts per pickupFour picking, four transfer
Total picking width m
Operating speed of belts m/min
Number of rollersTwo picking, two transfer
Number of fingers per belt84 center belts
77 outer belts
Float range57 mm
Diameter66 cm
26 in.
Auger fingersHeavy-duty and round with breakaway notch
Diameter: mm
Number of auger fingers19 STS, maximum 22
Auger finger patternIn-line, retracting
Finger reach mm
6 in.
Operating speedAt feederhouse speed: 15t: rpm
18t: rpm
Pressure1 bar
15 psi
Crop deflectorFactory installed
Approximate shipping weight (includes shipping skids) kg
Date collected15 June

The sensations were unusual and interesting, and she slowly became aroused. There was also a feeling of danger, suddenly I, or my wife, would now wake up. Her hand slid over my penis faster and faster, and the other at that time she gently stroked my testicles. Through my sleep I groaned and Natasha realized Ill finish now.

Deere platform header john

But he was completely out of the charms of his friend, and soon he and Lida submitted an application. Kolya clearly did not understand that Lida just wanted to leave her dusty and dirty Voznesensk to our clean, full of greenery and flowers. And the fact that you have room in her vagina so she has a man with a larger, aggregate.

John Deere 900 Series Platform New Owners

He was a tall, blond guy with brown eyes and a rather heavy build. I was a little shorter, but also in good physical shape, as the army demanded it. We got to the motel, checked in.

You will also be interested:

The godfather's voice was dry and elegant, it resembled a collection of butterflies. - we did not choose you, and not destiny. the godfather looked at your hands.

741 742 743 744 745