Custom smith mfg

Custom smith mfg DEFAULT

With the roller delayed blowback renaissance, accessories for the MP5 platform have exploded on the market. With the improved quality of rapid prototyping, now individuals can print out functional parts and sell them. Custom Smith MFG (CSM) makes 3D printed MP5 upgrade parts for the king of pistol caliber carbines. We got their MP5K AFG and binary selector levers.

Printed MP5 Upgrades: Mp5K AFG

I got the Mp5K AFG for my Omega K 9mm MP5K clone. As you can see in the photos above, it is designed to somewhat resemble the original H&K MP5K vertical grip, only the grip is angled rearward. One issue I had with the K is the short barrel and thus the short handguard that came with the gun. Due to the short length, the thenar of my palm (the fat part below your thumb) would touch the trunnion of my MP5K clone. This area gets hot rather quickly especially if I shoot the gun a lot and do multiple mag dumps with a binary trigger.

The CSM printed MP5 K AFG lowers my hand position away from the hot trunion. When you get the MP5K AFG there is some hand fitting required due to the wide variety of clone MP5Ks out there. My Omega was no exception.

See the short cylinder behind the cone of the barrel? That interfered with the CSM AFG

I had to hog out the inner diameter of the AFG to clear that part of the barrel. Without modification, the handguard could not move back far enough for the takedown pin to be pushed into place.

This is as far back as the AFG could fit on the Omega K 9mm.

Before

After

You could try and wrap your thumb around the AFG but it is not comfortable and actually rather awkward.

I found it a lot more comfortable to position my thumb high and while I don’t show it in the photo below, my thumb rides on top of the cocking lever and tube. Almost like a thumb shelf.

There is a minor issue with the CSM MP5K AFG and that is if you use short magazines. The length of the AFG does not allow you to grab the magazine up high near the mag well.

I have fired well over 1, rounds through my MP5K clone with the CSM AFG and the printed MP5 upgrades held up just fine. The 3D printed part seems to be of a higher quality above simple FDM (fused deposition modeling). It appears to be SLA (stereolithography) which is a better print and less chance of delamination between layers.

CSM Printed MP5 Upgrades: Binary HK Selectors

CSM Binary HK selectors

The Franklin Armory HK binary trigger is one of the best upgrades besides a suppressor you can get for your roller delayed blowback firearm of choice. However, the Franklin Armory factory selector lever leaves much to be desired. They are atrocious and many HK fans very much dislike the selector levers, especially for the higher price that the HK binary costs over a regular AR binary trigger.

Factory Franklin Armory Binary HK selectors

The Franklin selectors are milled aluminum but I honestly do not understand why this was their final design.

The Franklin Armory selectors are an eyesore.

One issue with the Franklin selectors is how long they are. It is nice that the HK binary trigger has ambidextrous selectors but the ambi side will dig into your trigger finger when you are in binary mode.

CSM designed and 3D printed HK style selectors to replace the selectors on the Franklin binary trigger pack.

The CSM Binary HK selectors have an indicator line that lines up with the full auto HK trigger housing. Specifically, the pictogram version as seen below. The line does not quite line up with the SAFE pictogram exactly but it is a small compromise. Franklin’s HK binary trigger has detents for the selector lever so it positions properly on a SEF lower as seen above.

What about other trigger housings? Here is an H&K SP5 factory trigger housing.

I have a US-made pictogram “Navy Lower” trigger housing that allows the use of SEF safety selectors. As you can see, the indicator line on the CSM selector does not line up with the pictogram markings.

The indicator line not lining up with various trigger housings is the only complaint I have. It is not a deal-breaker. CSM charges $35 for a pair of selectors. They sell a painted white line version and an all-black version. I would have preferred it if they offered a version that did not have the molded/printed line at all.

The 3D printed MP5 upgrades from CSM are of decent quality. There is no avoiding that uncanny valley aesthetic of a 3D printed item but they are functional and allows for immediate release and availability. The CSM AFG functions well and it turns heads but not always in a positive manner. Some do not like the angled look. “It looks like the VFG was bent” is a common comment I have heard.

What I would like to see is an MP5 wide handguard but designed for the MP5K. The MP5 wide handguard slides over the hot trunnion area.

This is a photoshop rendering of what I would like to see CSM make. A wide MP5K handguard.

CSM just came out with a new handguard design for the MP5K. Their Oversized handguards act similar to the concept I envisioned above. There is some extra material that flows over the trunnion and wraps around it to protect the hand. CSM makes a handguard and a VFG version with the rear flare. They sent their oversized handguard to me.

Just like their other handguards, it required a bit of modification to get it to fit my Omega 9MM K.

It definitely helps to protect the hand but I wonder why the sides only go up half way and not all the way up?

The only issue I have with this handguard is that you cannot add any lights or lasers. There is not enough room around the take down pin for a short rail like the HK parts picatinny rail for the front sight tower. If the material behind the screw was pushed back a little bit I could fit the rail segment and at least be able to mount a single accessor to the side.

The new oversized handguard is available for $ Their oversized VFG is available for $95 and they make a version that is compatible for B&T telescoping stocks. There is no additional option for the handguard though.

The MP5K AFG is on sale right now for $ And for those of you with SP5K aka non-PDW barrels, CSM makes an SP5K style AFG with shroud to help protect our fingers from encroaching near the muzzle.

CSM makes a whole host of accessories for all the popular pistol caliber carbines on the market. Go to their website to find out more.

Sours: https://www.firearmlicense.net/custom-smith-mfg-3d-printed-mp5-upgrades-the-firearm-blog.php

Michael Bonamico of Custom Smith MFG has posted up some teaser pics of his latest creation. If you recall, Custom Smith MFG makes 3D printed accessories for various firearms. I reviewed some of his MP5  accessories. Most of his accessories are brace/stock adapters as well as a variety of VFGs and AFGs for said firearms. Now Michael is making his first Custom Smith MFG chassis for the Ruger

Even though I own a Ruger, it never dawned on me that the serialized part is the trigger module somewhat like a P Michael Bonamico figured this out and has apparently designed a new lower for the Ruger His Custom Smith MFG Chassis replaces the polymer frame of the Ruger

Custom Smith MFG Chassis

Photo by Custom Smith MFG

You can see in the photo above that there is a charging handle to rack the slide.

Photo by Custom Smith MFG

The top cover comes off giving you access to the slide. You can see the charging handle here. I think it bolts where the optic plate would be.

Photo by Custom Smith MFG

Photo by Custom Smith MFG

Since the Ruger is so long, the barrel goes all the way to the end of the Custom Smith MFG chassis.

Photo by Custom Smith MFG

I briefly reached out to Michael Bonamico about his Custom Smith MFG chassis. At the moment he does not have a price set. But he hopes to have it soon. I would like to see the top cover styled more like an H&K MP7. It is not practical but it is something I would like to see as I am sure many others want an MP7 styled firearm that shoots x28mm.

Here is a video he posted on Instagram.

[embedded content]

I am excited to see a chassis system for the Ruger regardless of ammo scarcity. His MP should be a hit. He says he is two months away from releasing it for sale. Right now he is trying to solve some minor issues like the mag won’t drop free yet. However, I would like to point out that guns like the Kel-Tec CP33 and PMR/CMR are very popular and yet those mags do not drop free either.

Source: https://www.thefirearmblog.com/blog//03/18/custom-smith-mfg-chassis-ruger/?utm_source=rss&utm_medium=rss&utm_campaign=rss&utm_source=rss&utm_medium=rss&utm_campaign=custom-smith-mfg-chassis-ruger

Tagsx28Custom Smith MFGDaily NewsMPPistolsRugerSubmachine Guns/Pistol Caliber Carbines

Sours: https://mooreammo.com/custom-smith-mfg-chassis-for-ruger/
  1. 7th generation intel
  2. Behr premium plus enamel
  3. Fallout character overhaul
  4. Ebay music boxes
  5. Galaxy note edge manual

For Sale: Custom Smith MFG MP5 brace

Welcome to the NEW Armslist.com. Due to circumstances beyond our control, we have had to move forward and take the site in a slightly different direction. Fortunately, despite this, we are working hard to make the site MUCH better for law abiding Americans, and MUCH worse for those that are not law abiding Americans. Scammers have tried to prey upon Armslist users in the past, and while we may not eradicate their presence 100%, we will eradicate the vast majority. People have complained of impolite offers and communications from users with bad manners. That will be nearly eradicated with the new version of the site. And lastly, the financial, emotional, human, and other costs of the never-ending legal assaults on Armslist have made it impossible for us to keep the site free in the way it was in the past. Thank you for your support, and welcome to the new Armslist.com.


Please upgrade your free account with premium personal account to unlock the features.

Sours: https://www.armslist.com/posts/11469499/richmond-virginia-gun-parts-for-sale--custom-smith-mfg-mp5-brace-

For Sale: Custom Smith MFG MP5 brace

Welcome to the NEW Armslist.com. Due to circumstances beyond our control, we have had to move forward and take the site in a slightly different direction. Fortunately, despite this, we are working hard to make the site MUCH better for law abiding Americans, and MUCH worse for those that are not law abiding Americans. Scammers have tried to prey upon Armslist users in the past, and while we may not eradicate their presence %, we will eradicate the vast majority. People have complained of impolite offers and communications from users with bad manners. That will be nearly eradicated with the new version of the site. And lastly, the financial, emotional, human, and other costs of the never-ending legal assaults on Armslist have made it impossible for us to keep the site free in the way it was in the past. Thank you for your support, and welcome to the new Armslist.com.


Please upgrade your free account with premium personal account to unlock the features.

Sours: https://www.armslist.com/posts//richmond-virginia-gun-parts-for-sale--custom-smith-mfg-mp5-brace-

Smith mfg custom

I ordered the 9pt brace and tailhook for my ghm9 knowing the brace/adaptor was not an exact fit but would work ok.

Custom smith mfg ghm9. B&t ghm9 gen 2 standard pistol *free shipping* **we offer free form 1 engraving on b&t firearms purchased from us. I started a thread about mounts that fit on ghm9&#;s, people should add their mounts to that list. We can have it ready and in your hands in days.

Most of the products designed and crafted by custom smith focus on bringing pistol stabilizing braces to popular models like the tp9, apc9, and ghm9. Brugger & thomet is a swiss company that makes some of our favorite guns, but they were always expensive. When folded in does not get in the way of the factory charging handle.

I had the gen 1 folding stock with the custom smith mfg cheek rest. Shot almost rounds through it and suppressed as well. You know by know that we love b&t guns round this place.

I placed the order thursday night at around. Made from solid & proven onyx (nylon & carbon fiber) includes tail hook brace. It is a pleasure to shoot and i love it.

B&t ghm9c folding tailhook host. It’s a cheaper, more straightforward b&t handgun for. Custom smith mfg is taking the latest 3d printing technology and making it available to the everyday customer.

Get the latest information on pricing, shipping, and availability from jim&#;s firearms. 15 25 50 75 Out of stock add to wishlist compare product.

In todays world waiting 4 weeks to see if a prototype part is right can make or break your business. B&t tailhook adapter gen 2 with brace combo. If you are looking for unique pistol braces, you have come to the right spot.

This host mounts directly to the b&t. Made from solid & proven onyx (nylon & carbon fiber) compatible with: Made from original b&t factory parts.

Running the charging handle on the right side of the firearm will interfere with operation of the. B&t ghm9 gen 2 sport conversion kit * free shipping* b&t ghm9 gen 2 sport conversion kit includes 16,5 inch barrel and handguard to convert y. Ghm9c now shipping with a all new locking latch!

Made from original b&t factory parts. Looking for b&t ghm9 g compact 9mm for sale? B&t ghm9 g2 with folding custom smith mfg.

We can engrave if you reques. I have a brand new never mounted custom smith mfg folding adapter brace host for the b&t ghm9 /ghm9c / ghmthis lets you attach a gear head works tailhook to the folder and you have a pistol brace for your b&t. Tp9, mp9, ghm9, kh9, p

Also, i want make a short note about the spectacular customer service at custom smith mfg. We take the new ghm9c folding stock and convert it to a tailhook host which can be used on variety of b&t models. I had my ghm9 sbr&#;ed for almost 10 months now.

Tailhook version is the gear head works mod1. Gear head works tailhook mod 1 pistol brace. It folds to the right only.

Custom smith mfg 在 rock springs, peoria, arizona. It&#;s been a long time since posting on here and wanted to give y&#;all an update. Add this for a little extra control on these power house firearms.

Buy yours now from our partner! Locks in the closed/folded position. Custom smith mfg is in rock springs, peoria, arizona.

Tailhook adapters for all kinds of pistols. B&t tailhook adapter gen 2 with tail hook combo.

Sours: https://39cdbbd1.s3.us-eastamazonaws.com/custom-smith-mfg-ghm9.html
Custom Smith TP9 GHM9/45 Tailhook Host Install

I remember my behavior in these last minutes, the way I moaned when his finger pressed on my anus, the sucking of the tongues and the feeling, purely feminine, or rather. The desire to surrender my whole body to this man. Yes, I wanted to try unconventional love, yesI am very pleased now, but so quickly. And this convulsive and frequent squeezing of the anus, leading to bashful thoughts.

He sharply accelerated the movements, and these male thoughts left me.

You will also be interested:

She said, getting up from the toilet. Incredible relief. I'm ready to fly. Are you still going to give me an enema.



1546 1547 1548 1549 1550