Arc audio harley davidson

Arc audio harley davidson DEFAULT
Out of gallery

MPAK13CX Harley w/Coaxial Speakers

Description

When it comes to upgrading the audio system on your Harley-Davidson Road Glide or Street Glide, you can trust ARC Audio – the innovators of motorcycle audio upgrade packages. For those with a through Touring bike, the MPAK13 (Motorcycle Performance Audio Kit) has been created just for you.

The MPAK13 kit starts with our MOTO four-channel amplifier. Capable of delivering up to watts per channel, this amplifier was designed to make your bike’s stereo sound crystal clear, even at 70+ MPH. The sloped top of the amplifier allows it to fit under the stock fairing, and its physical design helps to ensure the amp won’t shut down, even when you leave the volume cranked for hours. Don’t let yourself be fooled by imitators – this amp has that detailed and accurate, low-distortion sonic signature that has made ARC Audio the choice for music lovers, enthusiasts and riders around the world. Designed for the motorcycle environment, the MOTO boasts an efficiency rating of over 96%! What does this mean to you as a motorcycle owner? More of the power from your motorcycle’s electrical system is fed to your speakers instead of converted to heat in the amp, so you can play your music louder and longer.

When it comes to speakers for your motorcycle, the MPAK13 currently offers two choices. For a warm, rich, and powerful sound, choose the MOTO CX6 inch coaxial speaker set. Designed specifically for motorcycle and powersports applications, these speakers are built with UV-resistant materials that can stand the test of time. We’ve added a secondary surround at the base of the woofer cone to seal against the tweeter post. This flexible seal keeps water and debris out of the voice coil assembly, so your speaker system will play reliably for years. Frankly, speakers without these features aren’t designed to be used outdoors and will likely fail in a year or so.

If you have to have the loudest bike on the block, then check out the MOTOHD speaker option. A lighter woofer cone and more compliant suspension more than double the efficiency of these drivers. The tweeter features a unique horn-loaded design that extends through the center of the driver. The huge titanium tweeter diaphragm has a diameter of inches. Whether you are rocking out to AC/DC or Zeppelin, your tunes will come through loud and clear, even with the throttle cranked on the freeway. The HD speakers include the same UV and weather-resistant features as the MOTO V2.

With a broad selection of speakers to fit your Harley-Davidson bagger, each MPAK kit includes speaker mounting adapters that make installation into the factory speaker locations easy without the need for any modifications to your motorcycle.

ARC Audio works directly with Harley-Davidson dealers to ensure our kits are designed with OEM-compatible, high-performance cables and connectors that make it easy for your installer to complete the installation. The MPAK13 kits include all the wiring you need to connect the MOTO amp to the radio and the new speakers. No wiring on the bike needs to be modified. Period. Your classic touring machine can be returned to stock at any time with no traces of it ever having been upgraded.

If you are looking to take the MPAK audio kits to the next level for the ultimate motorcycle audio system, add the ARC Audio PSM digital signal processor to your MPAK13 kit (sold separately). This processor comes pre-tuned to compensate for the radio tuning on the OEM Harley-Davidson Gen II audio systems. Even better, you and your technician have the ability to fine-tune the tone of the system to your listening style and preferences, just like the sound engineers do at a concert. The result is a system that is capable of delivering your music just the way you like it.

Note: Depending on the speaker and DSP combination you choose, the PSM may come in a separate package from the amp and speakers.

Out of gallery

MPAK13HD Harley w/Horn Speakers

Description

When it comes to upgrading the audio system on your Harley-Davidson Road Glide or Street Glide, you can trust ARC Audio – the innovators of motorcycle audio upgrade packages. For those with a through Touring bike, the MPAK13 (Motorcycle Performance Audio Kit) has been created just for you.

The MPAK13 kit starts with our MOTO four-channel amplifier. Capable of delivering up to watts per channel, this amplifier was designed to make your bike’s stereo sound crystal clear, even at 70+ MPH. The sloped top of the amplifier allows it to fit under the stock fairing, and its physical design helps to ensure the amp won’t shut down, even when you leave the volume cranked for hours. Don’t let yourself be fooled by imitators – this amp has that detailed and accurate, low-distortion sonic signature that has made ARC Audio the choice for music lovers, enthusiasts and riders around the world. Designed for the motorcycle environment, the MOTO boasts an efficiency rating of over 96%! What does this mean to you as a motorcycle owner? More of the power from your motorcycle’s electrical system is fed to your speakers instead of converted to heat in the amp, so you can play your music louder and longer.

When it comes to speakers for your motorcycle, the MPAK13 currently offers two choices with versions of the kits optional with Coaxial or Horn Loaded speakers. For a warm, rich and powerful sound, choose the MOTO V2 inch coaxial speaker set. Designed specifically for motorcycle and powersports applications this version of the MPAK 13 kit comes with the MOTOHD Horn Loaded Speakers. If you have to have the loudest bike on the block, the MOTOHD speaker option in this kit offers a lighter woofer cone and more compliant suspension more than double the efficiency of these drivers. The tweeter features a unique horn-loaded design that extends through the center of the driver. The huge titanium tweeter diaphragm has a diameter of inches. Whether you are rocking out to AC/DC or Zeppelin, your tunes will come through loud and clear, even with the throttle cranked on the freeway. The HD speakers include the same UV and weather-resistant features as the MOTO V2.

With a broad selection of speakers to fit your Harley-Davidson bagger, each MPAK kit includes speaker mounting adapters that make installation into the factory speaker locations easy without the need for any modifications to your motorcycle.

ARC Audio works directly with Harley-Davidson dealers to ensure our kits are designed with OEM-compatible, high-performance cables and connectors that make it easy for your installer to complete the installation. The MPAK13 kits include all the wiring you need to connect the MOTO amp to the radio and the new speakers. No wiring on the bike needs to be modified. Period. Your classic touring machine can be returned to stock at any time with no traces of it ever having been upgraded.

If you are looking to take the MPAK audio kits to the next level for the ultimate motorcycle audio system, add the ARC Audio PSM digital signal processor to your MPAK13 kit (sold separately). This processor comes pre-tuned to compensate for the radio tuning on the OEM Harley-Davidson Gen II audio systems. Even better, you and your technician have the ability to fine-tune the tone of the system to your listening style and preferences, just like the sound engineers do at a concert. The result is a system that is capable of delivering your music just the way you like it.

Note: Depending on the speaker and DSP combination you choose, the PSM may come in a separate package from the amp and speakers.

Out of gallery

MPAK14CX Harley + w/Coaxial Speakers

Description

Designed for and newer Harley-Davidson Road Glide and Street Glide touring motorcycles, the ARC Audio MPAK14 is the ultimate audio upgrade kit on the market. We’ve combined our motorcycle and powersport speakers with the amazing MOTO amplifier and included the “option” of the PSM digital signal processor to ensure your system sounds great. Curious about how it all works? Keep reading!

The MOTO is our second-generation motorcycle-specific amplifier. Other companies have copied its design but can’t touch its performance. Our electronics design team is unparalleled in the industry. Transparency, detail, and efficiency are just some of the words industry experts use to describe ARC Audio amplifiers. The MOTO is designed to fit on top of the factory radio without ANY modifications. It may sound weird to some, but we include industrial grade hook and loop fastener tape to mount the amp. Why? Because we don’t want to affect the structural integrity of your bike by suggesting a modification that will void the bike's warranty.

The angled top of the amplifier allows it to fit under the stock fairing while maintaining adequate heat sink size to ensure the amp won’t shut down, even when you leave the volume cranked for hours. Don’t let yourself be fooled by imitators – this amp has the crystal clear, low-distortion sonic signature that has made ARC Audio the choice for music lovers, enthusiasts and riders around the world. Designed for the motorcycle environment, the MOTO boasts an efficiency rating of over 96%! What does this mean to you as a motorcycle owner? Less power draw from your motorcycle and less demand on the charging system so you can listen to your music as loud as you want.

This MPAK14 kit comes equipped with the MOTO CX6 inch coaxial speakers are designed specifically for motorcycle applications. They include UV-resistant materials that ensure the speakers won’t chalk, fade or crack after only a few months. We’ve also included a secondary flexible gasket at the base of the woofer cone. This gasket keeps water and debris out of the motor assembly so the speaker will function reliably for years.

Speakers designed for motorcycle applications need to be able to play loud for hours on end. All MOTO-Series speakers are designed using high-temperature voice coil windings and formers to manage heat efficiently. The result of these upgraded components is more output and reliability than competing solutions from other brands. Are you thinking, ‘hey, they’ve thought of everything!’ Well, that’s what you get from the company that pioneered motorcycle audio upgrade packages.

That radio on your bike is a complex little design. Harley asked their supplier to include some downright strange signal processing to give the factory audio system a unique sound. Adding the optional ARC Audio PSM digital signal processor to the MPAK14 kit is the best way to deal with this strange acoustic tuning. We include an EQ curve that undoes the one built into the radio so your speakers will sound amazing. There’s no need to reflash anything or worry about voiding the electronics warranty on your new Harley. Likewise, you don’t have to deal with the hassles of having the radio flashed again after taking the bike in for maintenance or service. It just sounds great, all the time.

The PSM digital signal processor gives you the ability to fine-tune the sound and tone of the system to your specific listening style and preferences, just like the sound engineers do at a concert. The result is a smooth and natural performance that brings out the finest of details in your music.

As the MPAK14 is a full kit, it includes speaker adapters to let either speaker option bolt into the factory location and work with the enclosures in the fairing. Likewise, the kit includes dedicated power wiring to ensure efficient current delivery to the amp. Finally, the signal wiring uses OEM-compatible connectors to extract a signal from the factory radio and feed it to the DSP or MOTO amp. Not a single wire needs to be cut, tapped, or modified in any way, so your warranty remains unquestionably intact while you can enjoy your music the way it was supposed to be enjoyed – loud!

Note: Depending on the speaker and DSP combination you choose, the PSM may come in a separate package from the amp and speakers.

Out of gallery

MPAK14HD Harley + w/Horn Speakers

Description

Designed for and newer Harley-Davidson Road Glide and Street Glide touring motorcycles, the ARC Audio MPAK14 is the ultimate audio upgrade kit on the market. We’ve combined our motorcycle and powersport speakers with the amazing MOTO amplifier and included the “option” of the PSM digital signal processor to ensure your system sounds great. Curious about how it all works? Keep reading!

The MOTO is our second-generation motorcycle-specific amplifier. Other companies have copied its design but can’t touch its performance. Our electronics design team is unparalleled in the industry. Transparency, detail and efficiency are just some of the words industry experts use to describe ARC Audio amplifiers. The MOTO is designed to fit on top of the factory radio without ANY modifications. It may sound weird to some, but we include industrial grade hook and loop fastener tape to mount the amp. Why? Because we don’t want to affect the structural integrity of your bike by suggesting a modification that will void the bike's warranty.

The angled top of the amplifier allows it to fit under the stock fairing while maintaining adequate heat sink size to ensure the amp won’t shut down, even when you leave the volume cranked for hours. Don’t let yourself be fooled by imitators – this amp has the crystal clear, low-distortion sonic signature that has made ARC Audio the choice for music lovers, enthusiasts and riders around the world. Designed for the motorcycle environment, the MOTO boasts an efficiency rating of over 96%! What does this mean to you as a motorcycle owner? Less power draw from your motorcycle and less demand on the charging system so you can listen to your music as loud as you want.

This MPAK14 is equipped with the the MOTOHD Horn driven speakers designed specifically for motorcycle applications. They include UV-resistant materials that ensure the speakers won’t chalk, fade or crack after only a few months. These high-efficiency speakers combine a low-mass woofer cone with a massive horn-loaded tweeter to deliver amazing output. A large-diameter voice coil designs ensure great power handling and long-term reliability. If you want to drown out wind noise at 75 miles an hour or the rumble from a custom exhaust, the MOTOHD speakers are the right choice.

That radio on your bike is a complex little design. Harley asked their supplier to include some downright strange signal processing to give the factory audio system a unique sound. Adding the optional ARC Audio PSM digital signal processor to the MPAK14 kit is the best way to deal with this strange acoustic tuning. We include an EQ curve that undoes the one built into the radio so your speakers will sound amazing. There’s no need to reflash anything or worry about voiding the electronics warranty on your new Harley. Likewise, you don’t have to deal with the hassles of having the radio flashed again after taking the bike in for maintenance or service. It just sounds great, all the time.

The PSM digital signal processor gives you the ability to fine-tune the sound and tone of the system to your specific listening style and preferences, just like the sound engineers do at a concert. The result is a smooth and natural performance that brings out the finest of details in your music.

As the MPAK14 is a full kit, it includes speaker adapters to let either speaker option bolt into the factory location and work with the enclosures in the fairing. Likewise, the kit includes dedicated power wiring to ensure efficient current delivery to the amp. Finally, the signal wiring uses OEM-compatible connectors to extract a signal from the factory radio and feed it to the DSP or MOTO amp. Not a single wire needs to be cut, tapped or modified in any way, so your warranty remains unquestionably intact while you can enjoy your music the way it was supposed to be enjoyed – loud!

Sours: https://www.arcaudio.com/motorcycle-audio-kits

ARC Audio Speakers Add Punch to Harley-Davidson Street Glide

A previous client contacted us to get another upgrade after we had done a few audio upgrades on his Harley-Davidson Street Glide. Our team originally flashed the factory radio on it to provide a clean signal to an ARC Audio amplifier and speakers in the front. Then we added Rockford Fosgate bag lids for more volume. Now he wanted to add a bit more punch to the bike, and we jumped at the chance to help him with a new upgrade.

We added a second set of ARC Audio MOTO speakers to the rear bags. These speakers fire into the bag in the inner wall, and work with the speakers mounted on the top of the lids to create more punch. The added speakers, plus the previous upgrades we had performed, provide crystal-clear audio with enough volume to be heard easily whether it&#;s parked or at speed on the road. Our professional installation will provide him with years of trouble-free enjoyment.

Interested in an audio upgrade for your Harley? Swing by one of our Richmond, VA-area locations — in Mechanicsville or Midlothian — to talk with our experts. You can also contact us here.

See morecontent filed under INSTALLATIONS, Motorcycle Audioor tagged with , Amplifiers, ARC Audio, Harley Davidson, Motorcycles, Speakers, Street Glide


Sours: https://www.extremeaudio.org/arc-audio-speakers-add-punch-toharley-davidson-street-glide/
  1. North brunswick funeral home
  2. Bitfenix spectre pro 120mm
  3. North texas dog doors
  4. Henckels knife block
  5. 2014 silverado radio fuse

Harley-Davidson Street Glide from Gets Arc Audio Sound Upgrade

A client from Union Bridge rode into Westminster Speed and Sound interested in upgrading the motorcycle audio system on his Harley-Davidson Street Glide. One of our team spent significant time on getting to know the client, along with his goals for the upgrades. We let him listen to our store demo bike and he loved the clarity and output. He quickly decided to use us for his upgrades. At that point, we scheduled time to begin working on the bike.

Since this bike is a model, we began by flashing the factory radio to dramatically improve the sound quality coming out of it. The second step was to install an Arc Audio Moto amplifier. It puts out more than watts of clean power, ensuring the rider can hear his music clearly at speed. We mounted the amp inside the fairing itself.

The second step was replacing his Hogtunes speakers with a set of Arc Audio Moto motorcycle-specific speakers. They have incredible clarity and reliability, and work great with the rear speakers chosen by the client.

Rounding out the rear was a set of Rockford Fosgate TMS69BL14 baglid speakers. As you can see in the images, they look factory-installed and offer tremendous output potential.

In typical fashion for our shop, we soldered all of our connections with protective heat-shrink applied for the ultimate in durability. The wiring was neatly loomed and secured, making it easy to service in the future.

The final step was tuning the amplifier for the best overall sound.

When the client picked up his bike and we cranked it up for the first time, he was all smiles, knowing he had made the right choice.

If you would like to upgrade the system on your Harley, simply click HERE or ride on over to Westminster Speed & Sound in Westminster, Maryland. One of our team will work with you to find the best solution for your unique needs. Let us show you why we are the most-awarded vehicle technology facility in the Mid-Atlantic.

Filed Under: INSTALLATIONS, Motorcycle AudioTagged With: , Amplifiers, Arc Audio, Harley Davidson, Rockford Fosgate, Speakers, Street Glide

Sours: https://www.westminsterspeed.com/harley-davidson-street-glide-from-gets-arc-audio-sound-upgrade/

Large, poured. Once, having seen her photo in a swimsuit, he could not understand how he kept this size. And also her rather tall stature and long legs, a sexy tummy, which only added femininity. His colleague Ruslan once accidentally saw her photo on the phone, smiled slyly and asked who it was and if she was free.

Harley arc davidson audio

Raise the mug higher again. "I ordered my grandmother, otherwise she would push the tip out before the enema was empty!" The neighbor did as I ordered, and the girl howled. In pain, which was created quickly in the intestines by the incoming water.Be patient, Natasha, wait, everything will end. ", I calmed the girl as best I could.

How To Install A Motorcycle Performance Audio Kit (M.P.A.K.)

"Take off your pants and turn your back to me, as if nothing had happened," she said. From surprise, Seryozha was numb: How. Why?: Not his own voice said he, feeling I like a thick blush spreads over my face. - I want to measure the temperature rectally, Lena answered.

You will also like:

Nobody else. William felt that he was ready to explode from within from the strange nature of heat overwhelming him. Don't I deserve to be punished. she whispered again, leaving a light wet residue from her breath on William's left ear. As a lecher, a lecher, awakening strange and.



6838 6839 6840 6841 6842