Contained herein are the data and results of the Computational Fluid Dynamics (CFD) analysis that was conducted on the GT-250 airfoil. This data illustrates how the airfoil performs in different conditions by comparing Downforce vs. Angle-of-Attack (AOA) vs. Speed, and Drag vs. AOA vs. Speed. This data will provide insight with regards to how and how much the airfoil performs with respect to these conditions.
To learn how to interpret and apply this type of CFD data, see sample analysis on the GTC-300 page.
The information contained herein is property of APR Performance, and may not be reproduced in whole or in part without prior written consent from APR Performance.
DescriptionRepresenting the latest in ground-breaking aerodynamic performance, the GT-1000 includes these special features:
- 71" span, 10" chord (main foil), 4" chord (secondary foil)
- Ultra-high downforce, up to 1650 pound force (lbf) of downforce (at 160 MPH)
- Angle-of-Attack (AoA) adjustment from 10 to 52 degrees (relative to ground plane) on the secondary airfoil, with no stall at 52 degrees
- Side plate dimensions of 17.1" (width) x 9.39" (height)
- 6061 billet aluminum brackets
Chassis mounting is required. Do not mount the GT-1000 wing assembly to a vehicle trunk lid --- the downforce levels can easily deform and damage even factory OEM steel trunk lids and create hazardous conditions. Pedestals are not available for the GT-1000. All customers will be required to fabricate their own, chassis-mount pedestals for their specific applications.
Setup guidelines:Although the upper brackets (the ones that are permanently attached to the bottom of the main airfoil) have a multitude of mounting holes, the main airfoil is intended to be installed and fixed at exactly one position. For proper installation, the side plates (aka "end plates") are to be at exactly 0 degrees AoA relative to the ground plane. The main airfoil ends up being fixed at just under 5 degrees AoA relative to the ground plane. All on-track adjustments for more/less downforce are to be performed on the secondary airfoil only. These guideline will apply for all applications, regardless of vehicle model/shape/size. Following these guidelines will ensure optimal performance of the GT-1000 wing assembly.
Warning:User assumes full responsibility for ensuring proper installation as intended. Professional installation by well-qualified personnel is highly recommended. The vehicle applications shown above are intended to work as a complete system when installed. To insure proper function and reliability, APR advises against modification or substitution of any component of the intended installation. Any modification or substitution of the airfoil, side plates, pedestals, mounting bases, mounting brackets, or hardware included with the wing kit may create unsafe operating conditions and ultimately cause this system to fail.
APR Performance Carbon Fiber 71" GT-250 Swanneck Universal Adjustable Wing
When it comes to racing, every second counts. APR Performance Adjustable Wings can give you that edge to achieve faster lap times. By reducing lift and increasing downforce, you can gain extra traction during high speed cornering. Although adjustable wings aren't t specifically a suspension component, they play a crucial role to the handling characteristics of a car. By adjusting the angle of attack on an adjustable wing, you can dial in the amount of downforce for better car control. This allows your car to have more or less oversteer characteristics, giving you additional control to tune the rear traction of your car.
All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. This design allows the wing to maintain a consistent level of downforce across its entire span. Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials.
All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high quality aluminum billet molds. Supporting the airfoils are 10mm aircraft grade 6061 billet aluminum pedestals that come in a flat black powder coat finish.
- Swanneck 71 inch Adjustable Carbon Wing
- Reduces lift and increasing downforce
- Aerodynamic 2D designed airfoil shape
- Composed of lightweight, durable carbon fiber reinforced polymer (CFRP) composite materials
- 10mm aircraft grade 6061 billet aluminum pedestals supports airfoils
- Flat black powder coat finished
APR Performance has provided drivers with high-quality products for over 20 years. Whether you are looking for APR racing or street products, APR Performance is the expert when it comes to providing customers with aerodynamic products that improve the performance of their vehicle.
Who is APR Performance?
APR Performance is the leading name in aerodynamic performance products, using computational fluid dynamics (CFD) to create cutting-edge technology that can give your car the boost you need. They build products that are extraordinarily durable, lightweight and of superior quality.
APR Racing Applications
Here is a brief overview of some of the most popular APR racing components.Front Air Dams
APR Performance has created a top-of-the-line front air dam. Front air dams are added to the front bumper to increase your car’s stability when driving at high speeds, as well as reduce front end lift.APR Wing
An APR wing increases high-speed stability while simultaneously providing rear-end downforce.
APR Performance offers two different kinds of wings, allowing customers to choose between GT Series Adjustable Wings or GTC Series Adjustable Wings. The primary difference between the two is that the GT Series comes in three configurations: single element, dual element or swan neck configurations.APR Splitter Rods
APR splitter rods reinforce the Front Wind Splitter, which reduces front-end lift and optimizes high-speed stability.Rear Deck Spoilers
APR Performance rear deck spoilers fine-tune any downforce balance. As the name suggests, rear deck spoilers are integrated into the rear deck of your car.
APR Performance Products and APR Racing Applications From Vivid Racing.
APR Performance offers best-in-class aerodynamic racing and street applications for your car. If you are looking to speed up your car and improve its handling, APR racing components are a great aftermarket addition to your vehicle. If you are interested in learning more about APR Performance products or would like to add an APR racing application to your car today, contact Vivid Racing by calling (480) 966-3040.
LIMITED PRODUCT WARRANTY
All products manufactured by APR Performance are fully warranted against defects in workmanship and materials for one (1) year from the time of purchase. If any product is suspected of being defective, the customer may elect to return the product to APR Performance. APR Performance will not accept any C.O.D. returns unless specified by an APR Performance representative. Any item that is determined to be defective will be repaired or replaced. On any warranty claim, APR Performance will be responsible for APR Performance parts only. APR Performance is not responsible for any labor or inconvenience charges incurred by the customer. Questions about the APR Performance Limited Product Warranty policy may be directed toward an APR Performance representative at [email protected]
A. Warranty Policy
i. If a product should fail due to manufacturer’s defect within the stated warranty period, APR Performance will repair or replace the failed product.
ii. It is the responsibility of the customer/installer to verify the correct size and application of the parts before installation, and to ensure that proper installation is performed. Problems or failure caused by improper installation are not covered under the APR Performance Limited Warranty.
iii. Warranty claims shall be serviced by the applicable seller (APR Performance or Authorized Dealer/Reseller).
iv. If an item is returned and exhibits damage not covered by the APR Performance Limited Warranty, a quote will be generated for repair or replacement, plus delivery to the owner. At that time, the owner will have a choice to either pay for the repair or replacement, or request that the item be returned without any action taken by APR Performance. If Warranty requirements are met, the repaired or replaced item will be returned without charge and will continue to be covered for the balance of the original warranty period.
v. All return shipments must be freight prepaid and insured (against loss or damage) with tracking number. No C.O.D. shipments will be accepted. If the warranty claim is fulfilled, the additional shipping expenses incurred will be compensated.
vi. APR Performance is not responsible for any labor or inconvenience charges incurred by the customer.
B. Return Process for all Purchase and Warranty Returns
i. Retail customers that purchased product from an Authorized Dealer/Reseller must contact their respective dealer/reseller to initiate the return process.
ii. Retail customers that purchased product directly from APR Performance may contact APR Performance Customer Service at (909) 594-3796 or [email protected] to request for a Return Merchandise Authorization (RMA) number. When e-mailing for an RMA number, please include the following information: copy of the invoice, brief description of the problem, full name, return e-mail address (if different from the originating e-mail), shipping address, phone number and best time to call. Once an RMA number is received from APR Performance, it should be clearly marked on the outside of the box. The following information must be included inside the box: A copy of the invoice, reason for return, name, phone number, and return address. Ship the return package to: APR Performance, Inc., Attn: RMA Department, 225 Pacific St Pomona, CA 91768
I called her at work and offered to pick her up from work in the evening. She agreed. At the agreed time, I drove up to her work, she got out and got into the car and we drove out. Of town. I asked if they would lose her at home, she replied that she was often late at work and therefore everything would be.
Swan wing apr neck
An oilcloth medical couch, covered with a sheet, stood against the wall. Nearby was a nickel-plated table, on which were placed enema tips of various lengths and thicknesses, several thermometers of an unusual shape and multi-colored. Rubber pears, which Nina had seen many times in the windows of pharmacies. On the edge of the table lay a tube with the inscription, Vaseline.What Is a Swan Neck Wing Stand_ Swan Dive Into the Aero Trick.
On the other hand, in retrospect, the harsh consequences of his act immediately came before his gaze. Like all not very strong natures, he preferred not to face problems, but to escape from them, in the hope that everything will resolve by itself. He pulled out his tight dick and wiped it on a nearby rag, which, ironically, turned out to be lace panties.
You will also be interested:
- University of michigan ea
- Scratch pac man maze
- Wizard comic con box
- Modern family memes
- Edward jones tracy ca
- Sql explain plan
- Big blue market reddit
- Art of dying everything
Satisfied. Ron took hold of his pants and immediately pulled them down along with his panties. In the twilight, he could see his hairless pubis. The member was thin and long, the testicles swayed from side to side. George pointed his wand at this dignity.